Detailed instructions for use are in the User's Guide.
[. . . ] DANGER: The fuse from the cut-off plug should be removed and the cut-off plug destroyed immediately and disposed of in a safe manner. Under no circumstances should the cut-off plug be inserted elsewhere into a 13A socket outlet, as a serious electric shock may occur. To fit an appropriate plug to the mains lead, follow the instructions below: WARNING: THIS APPARATUS MUST BE EARTHED. IMPORTANT: The wires in this mains lead are coloured in accordance with the following code: Green-and-yellow : Earth Blue : Neutral Brown : Live As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug proceed as follows: · The wire which is coloured green-and-yellow must be connected to the terminal in the plug which is marked by the letter E or by the safety earth symbol or coloured green or green-and-yellow. [. . . ] 3 RCA to 15pin D-sub adaptor
23
Connecting to Video Equipment (Continued)
When connecting to equipment with S-video output terminal (INPUT3)
To S-video output terminal To audio output terminal DVD, etc. To INPUT3 terminal To AUDIO (INPUT3, 4) terminal
L R
RCA audio cable* (commercially available) *Use the cable when you want to enjoy the sound from the projector's speaker.
S-video cable (commercially available)
When connecting to equipment with video output terminal (INPUT4)
Supplied accessory
Video cable
To video output terminal To audio output terminal
DVD, etc. To INPUT4 terminal To AUDIO (INPUT 3, 4) terminal
L R
RCA audio cable* (commercially available) *Use the cable when you want to enjoy the sound from the projector's speaker.
Video cable
24
Connecting to a Computer
When connecting a computer, ensure that it is the last device to be turned on after all the connections are made. Ensure that you have read the operation manuals of the devices to be connected before making connections. To audio output terminal Computer To RGB output terminal Supplied accessory To INPUT1 terminal To AUDIO (INPUT1, 2) terminal
* ø3. 5 mm stereo or mono audio cable (commercially available or available as Sharp service part QCNWGA038WJPZ)
RGB Cable (commercially available)
Connections
* When using the ø3. 5 mm mono audio cable, the volume level will be half of when using the ø3. 5 mm stereo audio cable.
Note · See page 55 "Computer Compatibility Chart" for a list of computer signals compatible with the projector. Use with computer signals other than those listed may cause some of the functions to not work. · A Macintosh adaptor may be required for use with some Macintosh computers. · Depending on the computer you are using, an image may not be projected unless the computer's external output port is switched on. Press "Fn" and "F5" keys simultaneously when using a SHARP notebook computer). Refer to the specific instructions in your computer's operation manual to enable your computer's external output port.
25
Connecting to a Monitor with RGB Input Terminal
You can display computer images on both the projector and a separate monitor using two sets of RGB cables. Computer Monitor
To RGB To INPUT 1 terminal output terminal
To OUTPUT (INPUT 1, 2) terminal
To RGB input terminal
RGB cable (commercially available)
RGB cable (commercially available)
Note · RGB signals and Component signals can be output to the monitor.
Connecting to an Amplifier or Other Audio Equipment
The audio input from devices connected to the AUDIO INPUT terminals on the projector can be output to audio equipment. · Do not hold by the lens area.
31
Image Projection (Continued)
Adjusting the Volume
Press K/L on the remote control or O/Q+ on the projector to adjust the volume.
Note · Pressing K/O will lower the volume. · When the projector is connected to external equipment, the volume level of the external equipment changes in accordance with the volume level of the projector. Set the projector's volume to the lowest level when turning the projector on/off or changing the input signal. · When you do not want to output the sound from the projector's speaker while the projector is connected to external equipment, set "Speaker" in "PRJ-ADJ" menu to "Off". (See page 45. )
AV MUTE button Volume buttons
On-screen Display
Displaying the Black Screen and Turning off the Sound Temporarily
Press MAV MUTE on the remote control to temporarily display a black screen and turn off the sound.
Note
· Pressing MAV MUTE again will turn the projected image back on.
On-screen Display
32
KEYSTONE button
Correcting Trapezoidal Distortion
When the image is projected either from the top or from the bottom towards the screen at an angle, the image becomes distorted trapezoidally. The function for correcting trapezoidal distortion is called Keystone Correction.
Note · The Keystone Correction can be adjusted up to an angle of approximately ±13 degrees and the screen can also be set up to an angle of approximately ±13 degrees (when the resize mode is set to "STRETCH" (see page 34)).
Adjustment buttons (P/R/O/Q) RETURN button
1
Press g KEYSTONE to enter the Keystone Correction mode.
· You can also display the on-screen display of the Keystone Correction mode with d KEYSTONE on the projector.
R On-screen display (Keystone Correction mode)
Keystone ADJ. 0 END
2
Press P/Q or O/R to adjust the Keystone Correction.
· You can also adjust the Keystone Correction using the adjustment buttons on the projector.
Shrinks upper side. (Move the slide bar in the + direction. )
Basic Operation
Note · Press l RETURN while the on-screen display of the Keystone Correction mode is on the screen to return to the default setting.
Shrinks lower side. (Move the slide bar in the - direction. )
3
Press g KEYSTONE.
· The on-screen display of the Keystone Correction mode will disappear. · You can also use d KEYSTONE on the projector.
Info
· While adjusting the image using Keystone Correction, straight lines and the edges of the image may appear jagged.
33
Image Projection (Continued)
Resize Mode
This function allows you to modify or customize the resize mode to enhance the input image. Depending on the input signal, you can choose "STRETCH", "SIDE BAR" or "CINEMA ZOOM" image.
Press HRESIZE.
· See page 43 for setting on menu screen.
RESIZE button
VIDEO
· "STRETCH" is fixed when 540P, 720P or 1080I signals are entered.
Input Signal DVD / Video Image type STRETCH Output screen image SIDE BAR CINEMA ZOOM
4:3 aspect ratio
480I, 480P, 576I, 576P, NTSC, PAL, SECAM
Letter box
Squeezed
16:9 aspect ratio
540P, 720P, 1080I
16:9 aspect ratio
: Cutout area on which images cannot be projected.
34
Computer
STRETCH SIDE BAR
4:3 aspect ratio
SVGA (800 K 600) XGA (1024 K 768) SXGA (1280 K 960) SXGA L (1400 K 1050) SXGA (1280 K 1024) 1280 K 720
854 K 480
640 K 480
Other aspect ratios
854 K 480 854 K 480
640 K 480 J
Input Signal Computer Image type STRETCH
Output screen image SIDE BAR CINEMA ZOOM
Resolution lower than SVGA
SVGA
4:3 aspect ratio
Resolution higher than SVGA
Basic Operation
SXGA (1280K1024)
5:4 aspect ratio
1280K720
16:9 aspect ratio
: Cutout area on which images cannot be projected.
35
Operating with the Remote Control
Freezing a Moving Image
1 2
Press NFREEZE.
· The projected image is frozen.
Press NFREEZE again to return to the moving image from the currently connected device.
FREEZE button
Selecting the Picture Mode
You can select the appropriate picture mode to best match the projected image you are watching.
Press GPICTURE MODE.
· When pressing GPICTURE MODE, the picture mode changes in the following order:
Standard Natural Dynamic Movie1 Movie2
PICTURE MODE button
AUTO SYNC button
Note
· See page 41 for details on the picture mode.
Auto Sync (Auto Sync Adjustment)
Auto Sync function works when detecting input signal after the projector turns on. [. . . ] Its performance could be adversely affected by incorrect operation or interference. If this should happen, unplug the Unit and plug it in again after more than 5 minutes.
57
Appendix
Specifications
Product type Projector Model XV-320P Video system NTSC3. 58/NTSC4. 43/PAL/PAL-M/PAL-N/PAL-60/SECAM/DTV480I/DTV480P/ DTV540P/DTV576I/DTV576P/DTV720P/DTV1035I/DTV1080I/DTV1080I-50 Display method Single Chip Digital Micromirror DeviceTM (DMDTM) by Texas Instruments DMD panel Panel size: 0. 53", 1chip DMD No. of dots: 409, 920 dots (854 [H] × 480 [V]) Lens 11. 15 × zoom lens, F2. 42. 6, f = 19. 021. 9 mm Projection lamp 275 W DC lamp Component input signal 15-pin mini D-sub connector (INPUT1/2) Y: 1. 0 Vp-p, sync negative, 75 terminated PB: 0. 7 Vp-p, 75 terminated PR: 0. 7 Vp-p, 75 terminated Horizontal resolution 520 TV lines (DTV720P) Computer RGB input 15-pin mini D-sub connector (INPUT 1/2)/output RGB separate/sync on green type analog input: 00. 7 Vp-p, positive, 75 terminated (OUTPUT) signal HORIZONTAL SYNC. SIGNAL: Same as above S-video input signal 4-pin mini DIN connector (INPUT 3) Y (luminance signal): 1. 0 Vp-p, sync negative, 75 terminated C (chrominance signal): Burst 0. 286 Vp-p, 75 terminated Video input signal RCA connector: VIDEO, composite video, 1. 0 Vp-p, sync negative, 75 (INPUT 4) terminated Vertical frequency 4585 Hz Horizontal frequency 1570 kHz Pixel clock 12108 MHz RS-232C terminal 9-pin mini DIN connector Audio input signal ø3. 5 mm minijack or RCA terminal: 0. 5 Vrms, more than 22 k (stereo) Audio output signal ø3. 5 mm minijack: 0. 5 Vrms, less than 2. 2 k (AUDIO OUTPUT 1-4) Speaker system 4 cm × 2. 85 cm oval × 1 Rated voltage AC 100240 V Input current 3. 6 A Rated frequency 50/60 Hz Power consumption 350 W (Lamp Setting "Bright")/ 305 W (Lamp Setting "Eco + Quiet") with AC 100 V 330 W (Lamp Setting "Bright")/ 285 W (Lamp Setting "Eco + Quiet") with AC 240 V Power consumption (standby) 4 W (AC 100 V) 5 W (AC 240 V) Heat dissipation 1, 315 BTU/hour (Lamp Setting "Bright")/ 1, 145 BTU/hour (Lamp Setting "Eco + Quiet") with AC 100 V 1, 240 BTU/hour (Lamp Setting "Bright")/ 1, 070 BTU/hour (Lamp Setting "Eco + Quiet") with AC 240 V Operating temperature 41°F to 95°F (+5°C to +35°C) Storage temperature 4°F to 140°F (20°C to +60°C) Cabinet Plastic I/R carrier frequency 38 kHz Dimensions (approx. ) 12 13/32" × 4 19/64" × 11 1/32" (315 (W) × 109 (H) × 280 (D) mm) (main body only) 12 13/32" × 4 47/64" × 11 37/64" (315 (W) × 120 (H) × 294 (D) mm) (including adjustment foot and projecting parts) Weight (approx. ) 8. 6 lbs. [. . . ]