User manual SHARP XL60 OPERATION MANUAL PART FROM THE SERVICE MANUAL

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SHARP XL60. We hope that this SHARP XL60 user guide will be useful to you.


SHARP XL60 OPERATION MANUAL PART FROM THE SERVICE MANUAL: Download the complete user guide (198 Ko)

You may also download the following manuals related to this product:

   SHARP XL60 OPERATION MANUAL (853 ko)
   SHARP XL60 QUICK START GUIDE (153 ko)

Manual abstract: user guide SHARP XL60OPERATION MANUAL PART FROM THE SERVICE MANUAL

Detailed instructions for use are in the User's Guide.

[. . . ] PREPARATION FOR USE SETTING THE CLOCK (Main unit operation) In this example, the clock is set for the 24-hour (0:00) system. XL-60H/70H s Remote control 6 Press the MEMORY/SET button. 0. 2m - 6m (8" - 20") MEMORY/SET CLOCK/TIMER/ SLEEP Jog dial 7 Adjust the minutes by turning the jog dial. 15 15 Notes concerning use: q Replace the batteries if the operating distance is reduced or if the operation becomes erratic. q Periodically clean the transmitter LED on the remote control and the sensor on the main unit with a soft cloth. [. . . ] (AM 12:00 - PM 11:59) q Note that this can only be set when the unit is first installed or it has been reset (see page 29). Note: q In the event of a power failure or when the AC power lead is disconnected, the clock display will go out. When the AC power supply is restored, the clock display will flash on and off to indicate the time when the power failure occurred or when the AC power lead was disconnected. To change the time display mode: 4 Press the MEMORY/SET button. Caution: q The operation explained above will erase all data stored in memory, such as clock and timer settings, and tuner and CD presets. 1 Perform steps 1 - 3 in the section "RESETTING THE MICROCOMPUTER", . 5 Adjust the hour by turning the jog dial. 2 Perform steps 1 - 8 above. q When the jog dial is turned one click clockwise, the time will increase by 1 hour. When it is turned one click anti-clockwise, the time will decrease by 1 hour. q When the 12-hour display is selected, "AM" will change automatically to "PM". XL-60H/70H 1 Check the supplied accessories 5 Listening to a CD 4 Label side up 3 OPEN/CLOSE 1 2 3 Press the ON/STAND-BY button to turn the power on. Press the FUNCTION button until "CD" or "NO DISC" appears. Adjust the VOLUME control. Remote control × 1 AM loop aerial ×1 5 (For U. K. ) FM aerial × 1 1 (For Europe) AC power lead × 1 4 5 6 7 6 7 2 2 Putting batteries into the remote control 2 Insert the batteries. 3 Replace the battery cover. 6 Listening to a tape 1 1 2 4 5 Press the ON/STAND-BY button to turn the power on. Press the button. 1 Remove the battery cover. 2 3 4 5 q 2 "AA" size batteries (UM/SUM-3, R6, HP-7 or similar) 3 Adjust the VOLUME control. Placing the system 10 cm (4") 10 cm (4") 20 cm (8") 10 cm (4") 3 7 1 Listening to the radio 1 Press the ON/STAND-BY button to turn the power on. Press the FUNCTION button until "FM" or "AM" appears. [. . . ] Whilst pressing down the MEMORY/SET button and the button, plug the AC power lead into the AC INPUT socket on this unit. AC 230 V, 50 Hz (For U. K. ) 2, 3 Caution: q The operation explained above will erase all data stored in memory, such as clock and timer settings, and tuner and CD presets. AC 230 V, 50 Hz (For Europe) q CD pickup cleaning q Do not touch the laser pickup lens. If fingerprints or dust accumulate on the pickup, clean it gently with a dry cotton swab. 3 Connect the AC power lead. ­7­ [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SHARP XL60




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SHARP XL60 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.