User manual SHARP VL-NZ100U
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SHARP VL-NZ100U. We hope that this SHARP VL-NZ100U user guide will be useful to you.
Manual abstract: user guide SHARP VL-NZ100U
Detailed instructions for use are in the User's Guide.
[. . . ] Operation References
LIQUID CRYSTAL DISPLAY CAMCORDER
MODEL
VL-NZ100U VL-NZ150U
OPERATION MANUAL
Preparation Basic Operations Useful Features Advanced Features Digital Still Camera Features
Please read this operation manual carefully before using the camcorder.
Important
For assistance in reporting the theft or loss of this product, record on the line below the model number and serial number which are located on the bottom of the unit. Model No. : Serial No. :
Appendix
· See page 79 for use of Demo mode.
Thank you for purchasing this camcorder from SHARP. The camcorder will enhance your home video enjoyment and allow you to capture those special moments. Please read this operation manual to familiarize yourself with the camcorder's features, so that you will get the most out of it. [. . . ] Once recorded, the time code cannot be changed.
Display format
TC0 00 10 20
Frame number* Second Minute Hour * Displayed during still playback.
Displaying the time code on a TV during playback
1
· The example screens shown are for TAPE-VCR mode.
In TAPE-VCR mode, press the MENU button until the menu screen appears. Press l or m on the operation button to select I, then press the SET button. Press l or m to select "TC OUT", then press the SET button.
OTHE RS R EMO T E BEEP T I ME CO D E T C OU T R E T URN
1
Advanced Features
During playback or camera recording in TAPE modes, press the MENU button until the menu screen appears. Press l or m on the operation button to select I, then press the SET button. Press l or m to select "TIME CODE", then press the SET button.
OTHE RS R EMO T E BEEP T I ME CO D E T C OU T R E T URN
2 3
2 3
OFF ON
D I S P. ON
4
Press l or m to select "ON", then press the SET button.
T C OU T
ON
4
Press l or m to select "DISP. ON", then press the SET button.
5
Press the MENU button to turn off the menu screen.
T I ME CODE
D I SP. ON
47
Editing
Available mode: TAPE-VCR
Cutting Unwanted Sequences
1
Video editing lets you refine your videos by removing unwanted sequences from your tape, or transposing one sequence with another. This camcorder lets you monitor the source program on the built-in LCD monitor without having to connect it to an external TV or video monitor. Connect the camcorder to a VCR with the supplied audio/video cable, as shown.
Recording
CHANNEL
PAUSE /STILL PLAY STOP/ EJECT
Play back the tape to be edited on the camcorder, and locate the beginning and end of the sequence you wish to cut. Write down the time code reading at the beginning and end of that sequence (see page 47). Then, rewind the tape to before the beginning of the portion that you wish to keep. Press m on the camcorder to begin playback, then press the Record button on the VCR to begin recording. Press the Pause/Still button on the VCR to pause recording when the source tape reaches the beginning of the sequence to be cut. Press the Pause/Still (or Record) button on the VCR to resume recording when the source tape reaches the end of the sequence to be cut.
2 3 4
POWER TV/VCR SET UP
REC
Yellow: To video input jack White: To audio input (L) jack Red: To audio input (R) jack
Audio/video cable (supplied) Playback
5
To stop editing
Press l on the camcorder and press the Stop button on the VCR.
To AV jack : The arrow shows the signal flow. · If your VCR has only one audio input jack, use the white plug for the audio connection on the VCR. Notes: · Some of the transitions between edited sequences may be slightly off. · There may be picture noise during video search or still playback. · The time code display will be recorded along with the edited sequences if the TC OUT menu item is set to "ON". Set to "OFF" before editing (see page 47).
48
Advanced Features
Advanced Features Playback
Recording from an External Source
Available mode: TAPE-VCR
To Record from an External Source
1 2
Set the camcorder to TAPE-VCR mode, and insert a Mini DV cassette. Begin playback on the video equipment connected to the camcorder.
· Check the camcorder screen to see if the picture is properly received.
You can use this camcorder to record or edit videos from another source, such as a VCR, TV, or video disc player. Connect the camcorder to the source equipment with the supplied audio/video cable, as shown.
Recording
3
Press the REC START/STOP button on the camcorder.
· The camcorder enters Recording Standby mode.
4
To AV jack
Press m on the Operation button to begin recording.
Audio/video cable (supplied)
Notes: · To pause recording, press m. [. . . ] B A NDE DI S 16 : 9 M O D E A UD I O RE T OUR D I V E RS BI P C OD E HOR . HO R L OG E A F F I C HA G E RE G L A G E 12H / 24H RE T OUR
AU T O 3 0 min
REG L. L E C T ME NU I MA GE DO U B SON AUD I O A N L G NUMR R E T OU R D I V E RS T E L E C OM . L E C T ME NU I MA GE DO U B SON AUD I O A N L G NUMR R E T OU R
A UD I O 1 + 2
R E GL . [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SHARP VL-NZ100U
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SHARP VL-NZ100U will begin.