User manual SHARP UX-P200
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SHARP UX-P200. We hope that this SHARP UX-P200 user guide will be useful to you.
Manual abstract: user guide SHARP UX-P200
Detailed instructions for use are in the User's Guide.
[. . . ] Installation Sending Faxes Receiving Faxes Making Copies Special Functions Printing Lists Maintenance Troubleshooting
WARNING - FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the user's authority to operate this equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] In this case, only the phone number will appear.
Display example
JOHN DOE 525-8693
Caller's name
Caller's number
Display messages
One of the following messages will appear while the fax rings if caller information is not available. NO SERVICE No caller information was received from your telephone company. Make sure that the telephone company has activated your service.
CALLER-ID ERROR Noise on the telephone line prevented reception of caller information. OUT OF AREA The call was made from an area which does not have a caller identification service, or the caller's service is not compatible with that of your local phone company. Caller information was not provided by the telephone company at the caller's request.
PRIVATE CALL
45
5. Special Functions
Caller ID (Requires Subscription to Service)
Viewing the Caller ID list
If you subscribe to a Caller ID service and have turned on the Caller ID function, your fax machine will keep information on the most recent 30 calls and faxes you have received. You can view this information, which consists of the name and number of each caller, in the Caller ID List.
After you have received 30 calls, each new call will delete the oldest call. All calls will be erased if you unplug the fax or a power failure occurs.
Follow the steps below to view the Caller ID List in the display. If desired, you can immediately dial a number when it appears.
1 2 3
Press
twice.
<REVIEW CALLS>
Press
or
to scroll through the list.
If you want to dial one of the numbers in the list, scroll through the list until the number appears in the display.
· Fax: If you want to send a fax, load the
document and then press
START/MEMORY
. Fax:
START/MEMORY
Dialing and transmission begin.
· Voice call: If you want to make a voice
call, pick up the handset (or press
SPEAKER
). (If
SPEAKER
you pressed
, pick up the
Voice call:
handset when the other party answers. )
4
Press
STOP
when you have finished viewing the list.
46
Caller ID (Requires Subscription to Service)
To delete calls from the Caller ID list
If you want to delete a single call from the caller list, press 0 while the call
appears in the display. If you want to delete all calls from the list, hold
0
down for at least 3 seconds while you are viewing any number in the list.
Priority Call
With Caller ID turned on, you can set your fax to make a special ringing sound when you receive a call from a designated phone number. This lets you know immediately who is calling without having to look at the display. To use this function, enter the desired phone number by following the steps below (only one phone number can be entered).
1 2 3 4
Press
FUNCTION
once and
twice.
Display: ENTRY MODE
Press
once and
once.
PRIORITY #
Press
once.
1=SET, 2=CLEAR
Press
1
to store a number.
(To clear a previously stored number, press
2
and go to Step 6. )
5 6 7
Enter the number by pressing the number keys (max. 20 digits).
Press
START/MEMORY
to store (or clear) the number.
OWN NUMBER SET
Press
STOP
to return to the date and time display.
47
5. Special Functions
Caller ID (Requires Subscription to Service)
Blocking voice calls
With Caller ID turned on, you can use the Anti Junk Fax function described in Blocking Reception of Unwanted Faxes in this chapter to block voice calls as well as faxes from your specified Anti Junk Number. In this case, when a voice call or a fax transmission comes in from the number you have specified as a "Junk Number", your fax will break the connection as soon as it receives the calling phone number from the caller ID service (before the second ring). To use this function, enter the number that you wish to block as explained in Blocking Reception of Unwanted Faxes (see page 50). Only one number can be blocked.
Note: This function cannot be used if you are using the Distinctive Ring function.
48
Distinctive Ring (Requires Subscription to Service)
Distinctive Ring (Requires Subscription to Service)
Important:
To use distinctive ring, you must subscribe to a distinctive ring
service from your local phone company.
Your fax machine may not be compatible with some distinctive ring
services. Distinctive ring is a service offered by some local telephone companies whereby they assign an additional second number to your regular single line. If you subscribe to a distinctive ring service, you can set the fax machine to automatically answer when your second number is called. To have your fax automatically answer when your second number is called, follow the steps below:
1 2 3 4
Press
FUNCTION
once and
once.
Display:
Press
once and
3 times.
DISTINCTIVE
Press
once.
Press a number from 1 to 3 to select the ring pattern below that matches your second number's ring pattern. [. . . ] Press
START/MEMORY
and then
STOP
.
70
Guía de referencia rápida
Transmisión de mensajes telefax
Coloque el original (hasta 10 páginas) cara abajo en el alimentador de documentos.
Recepción de mensajes telefax
RESOLUTION/
Oprima RECEPTION MODE hasta que la flecha que hay en el display señale hacia el número de recepción deseado.
TEL FAX
RESOLUTION/ RECEPTION MODE
JAN-01 10:30
TEL FAX
JAN-01 10:30
Modo FAX: El fax responde automáticamente y recibe el documento entrante. Marcación normal Modo TEL: Responda a todas las llamadas (incluso mensajes de fax), levantando el auricular. Marque el número de telefax.
SPEAKER
.
START/MEMORY
.
3. Espere hasta escuchar el tono de
recepción (si contestara una persona, pídale oprimir su tecla Start).
Memorizar números marc. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SHARP UX-P200
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SHARP UX-P200 will begin.