User manual SHARP PN-E702 ANNEXE 2

[. . . ] PN-E702 LCD MONITOR OPERATION MANUAL IMPORTANT: To aid reporting in case of loss or theft, please record the product’s model and serial numbers in the space provided. The numbers are located in the rear of the product. Model No. : Serial No. : U. S. A. IMPORTANT The wires in this mains lead are coloured in accordance with the following code: GREEN-AND-YELLOW: Earth BLUE: Neutral BROWN: Live As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug proceed as follows: • The wire which is coloured GREEN-AND-YELLOW must be connected to the terminal in the plug which is marked by the letter E or by the safety earth or coloured green or green-and-yellow. • The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured black. [. . . ] When set to VARIABLE 2, sound will not be output from the built-in speaker or the external speaker terminal. AUDIO LEVEL (STEREO MINI) Selects the maximum audio input level of the audio input terminal. SELF ADJUST On a PC D-SUB/PC RGB screen, specify whether to perform screen adjustment automatically or not. When ON is selected, the screen is automatically adjusted when its resolution is 800 x 600 or higher and the timing of input signals changes. For images with black edges, etc. , depending on the signal, adjustment may not be possible. (Perform manual adjustment of the screen. ) AUTO INPUT CHANGE Specify whether to change inputs automatically. When ON is selected and no signal is present in the selected input mode, AUTO INPUT CHANGE automatically changes the selected mode to another mode where a video signal is present. When video signals exist in multiple input modes, the switching priority is as follows: PC D-SUB, PC HDMI, AV HDMI, AV COMPONENT and AV VIDEO When the PN-ZB01 (optional) is attached: PC DVI-D, PC HDMI, PC D-SUB, PC RGB, AV DVI-D, AV HDMI, AV COMPONENT, AV S-VIDEO and AV VIDEO (Input mode switching may take 15 seconds or more, depending on the connected equipment. Input signals may not be detected properly and a priority may change, depending on the connected equipment or video signals. ) nMULTI ENLARGE (See page 26. ) Sets whether or not to use the enlarge function. ADVANCED (ENLARGE) ENLARGE H / ENLARGE V . . . . . . . . . .  ets the number of screen splits (number of S monitors) in the horizontal/vertical direction used for the enlargement. ENLARGE-POS . . . . . . . . . .  pecify the split screen to be displayed when the S enlargement function is used. H-POS / V-POS Adjust the horizontal/vertical position of the enlarged screen. BEZEL ADJUST Sets whether or not to use the frame correction function. ADVANCED (BEZEL ADJUST) BEZEL ADJUST (TOP) / BEZEL ADJUST (BOTTOM) / BEZEL ADJUST (RIGHT) / BEZEL ADJUST (LEFT) . . . . . . . . . .  djusts so that the top/bottom/left/right connecting A joints of grouped units will be displayed smoothly when a group of monitors are aligned in multiples to display a single image. BEZEL (TOP) / BEZEL (BOTTOM) / BEZEL (RIGHT) / BEZEL (LEFT) . . . . . . . . . .  ets the frame width of the display. S E 24 Menu Items nPIP/PbyP PIP MODES Sets the display method. PIP Displays a sub screen inside a main screen. PbyP Displays a main screen and a sub screen in a line. PbyP2 Displays a main screen which measures 1280 pixels in the longest direction and a sub screen in a line. PIP H-POS Adjusts the horizontal position of the sub screen in PIP mode. PIP V-POS Adjusts the vertical position of the sub screen in PIP mode. PIP BLEND In PIP mode, use this menu item to display the sub screen transparently. [. . . ] There are several types of DDC, depending on the communication method used. This monitor supports DDC2B. 7-7/8 [200] 53 E Specifications nCompatible signal timing (PC) Screen resolution VESA 640 × 480 Hsync 31. 5kHz 37. 9kHz 37. 5kHz 35. 1kHz 37. 9kHz 48. 1kHz 46. 9kHz 31. 0kHz 48. 4kHz 56. 5kHz 60. 0kHz 67. 5kHz 47. 8kHz 60. 3kHz 49. 7kHz 60. 0kHz 64. 0kHz 80. 0kHz 47. 7kHz 65. 3kHz 55. 9kHz 75. 0kHz 65. 3kHz 74. 0kHz 44. 7kHz 66. 3kHz 67. 5kHz 31. 5kHz 48. 3kHz 53. 6kHz 56. 6kHz 61. 8kHz 71. 8kHz 71. 7kHz 81. 1kHz 68. 6kHz Vsync 60Hz 72Hz 75Hz 56Hz 60Hz 72Hz 75Hz 60Hz 60Hz 70Hz 75Hz 75Hz 60Hz 75Hz 60Hz 60Hz 60Hz 75Hz 60Hz 60Hz 60Hz 60Hz 60Hz 60Hz 60Hz 60Hz 60Hz 70Hz 60Hz 66Hz 70Hz 66Hz 76. 2Hz 67. 2Hz 76Hz 66Hz Dot frequency 25. 175MHz 31. 5MHz 31. 5MHz 36. 0MHz 40. 0MHz 50. 0MHz 49. 5MHz 33. 75MHz 65. 0MHz 75. 0MHz 78. 75MHz 108. 0MHz 79. 5MHz 102. 25MHz 83. 5MHz 108. 0MHz 108. 0MHz 135. 0MHz 85. 5MHz 121. 75MHz 106. 5MHz 162. 0MHz 146. 25MHz 154. 0MHz 74. 4MHz 148. 5MHz 148. 5MHz 28. 3MHz 64. 13MHz 70. 4MHz 74. 25MHz 94. 88MHz 108. 23MHz 117. 01MHz 134. 99MHz 135. 76MHz Digital DVI*2 Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes HDMI Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Analog (D-SUB/RGB*2) Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes 800 × 600 848 × 480 1024 × 768 1152 × 864 1280 × 768 1280 × 800 1280 × 960 1280 × 1024 1360 × 768 1400 × 1050 1440 × 900 1600 × 1200*1 1680 × 1050 1920 × 1200*1 1280 × 720 1920 × 1080 720 × 400 1024 × 768 Wide US TEXT Sun 1152 × 900 1280 × 1024 1600 × 1000 *1 Displays a reduced image, except in Dot by Dot. In Dot by Dot, the image will be cut down to panel size then displayed. *2 Available when the PN-ZB01 (optional) is attached. * All are compliant only with non-interlaced. [. . . ]