User manual SHARP LC12A2E QUICK START GUIDE
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SHARP LC12A2E. We hope that this SHARP LC12A2E user guide will be useful to you.
Manual abstract: user guide SHARP LC12A2EQUICK START GUIDE
Detailed instructions for use are in the User's Guide.
[. . . ] [. . . ] Rear control panel of main unit
1
Press MENU on the main unit for more than 2 seconds.
The AUTO mode screen appears.
AUTO( ) VHF 1 43. 25MHz
2
Press VOL () on the main unit.
All the TV stations in your area that can be received by the LCD TV set are automatically preset between channels 1 to 99.
VOL () MENU
3
The screen shows whatever is on channel 1 when fully automatic channel preset is finished.
PAL
1
Presetting the Channels (MANUAL)
I Setting a channel number for desired TV station
Rear control panel of main unit
1 2
Press MENU on the main unit for more than 2 seconds.
The AUTO mode screen appears.
Press MENU until the MANUAL mode screen appears.
MANUAL( ) VHF 1 48. 25MHz
VOL (+)/() MENU
Web-site: www. sharp. co. uk/support Help Line (office hours only): 0990-274277
LC-12A2EGuide
3
00. 8. 5, 5:17 PM
Presetting the Channels (MANUAL) (Continued)
3
Select the channel number with CHANNEL SELECT or CH (L)/(M).
MANUAL( ) VHF 5 107. 50MHz
Channel number
4
Press VOL (+)/() to locate the station you want to preset to the channel.
A search is initiated and when a TV signal is received during the search, the search stops.
5 6
Rear control panel of main unit
Repeat steps 3 and 4 above to preset the channel numbers for other stations. Press MENU until the normal screen appears.
I In a weak reception area, or under bad reception conditions
1 2 3
Press MENU on the main unit for more than 2 seconds.
The AUTO mode screen appears.
Press MENU until the MANUAL mode screen appears. While the MANUAL mode screen is displayed, press MENU for more than 2 seconds to display the FINE mode screen.
The channel number remains in green.
VOL (+)/() MENU
FINE UHF 5 625. 50MHz
4 5
Adjust for good reception with VOL (+)/(). After finishing the adjustment, press MENU to continue channel presetting.
Web-site: www. sharp. co. uk/support Help Line (office hours only): 0990-274277
TINS-XXXXCEZZ
LC-12A2EGuide
4
00. 8. 5, 5:18 PM [. . . ] [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SHARP LC12A2E
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SHARP LC12A2E will begin.