User manual SHARP AQUOS LC-32DA5U OPERATION MANUAL
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SHARP AQUOS LC-32DA5U. We hope that this SHARP AQUOS LC-32DA5U user guide will be useful to you.
Manual abstract: user guide SHARP AQUOS LC-32DA5UOPERATION MANUAL
Detailed instructions for use are in the User's Guide.
[. . . ] THE PRODUCT MAY FALL CAUSING SERIOUS PERSONAL INJURY AND SERIOUS DAMAGE TO THE PRODUCT. USE ONLY WITH A CART, STAND, TRIPOD, BRACKET, OR TABLE RECOMMENDED BY THE MANUFACTURER OR SOLD WITH THE PRODUCT. FOLLOW THE MANUFACTURER'S INSTRUCTIONS WHEN INSTALLING THE PRODUCT AND USE MOUNTING ACCESSORIES RECOMMENDED BY THE MANUFACTURER. QUICK STOPS, EXCESSIVE FORCE, AND UNEVEN SURFACES MAY CAUSE THE PRODUCT AND CART COMBINATION TO OVERTURN. [. . . ] Press c/d to adjust the item to the desired level.
cbutton For weaker treble For weaker bass dbutton For stronger treble For stronger bass
NOTE · You can choose Surround by pressing SURROUND on the remote control unit. · Audio menu is grayed out when Output Select is set to "Variable". In this case, please refer to the operation manual of your DVD player.
Selected item Treble Bass Balance
Decrease audio from Decrease audio the right speaker from the left speaker
5
Press MENU to exit.
NOTE · Audio menu is grayed out when Output Select is set to "Variable". · For resetting all Audio adjustment items to the factory preset values, press a/b to select "Reset", press ENTER, press c/d to select "Yes", and then press ENTER.
25
Basic adjustment settings
Power Control
Power control setting allows you to save energy. No signal off When set to "Enable", the power will automatically shut down if there is no signal for 15 minutes.
Digital Setup
This setting allows you to optimize the settings of Digital broadcasting.
Audio Setup
You can output digital audio to an AV amplifier or similar device whose DIGITAL AUDIO INPUT terminal is connected to the DIGITAL AUDIO OUTPUT terminal on the TV. Please select an audio output format compatible with the audio format of the program you are watching and the equipment connected.
1 2 3 4
Press MENU and the MENU screen displays.
Press c/d to select "Power Control". Press c/d to select "Enable", and then press ENTER.
1 2 3
Press MENU and the MENU screen displays.
Press c/d to select "Digital Setup". Press a/b to select "PCM" or "Dolby Digital", and then press ENTER.
Enable
Disable
4
· Five minutes before the power shuts down, the remaining time displays every minute.
PCM
5
Press MENU to exit.
Dolby Digital
NOTE · "Disable" is the factory preset value. · When a TV program finishes, this function may not operate.
Selected item PCM
Description The optical output terminal outputs audio signal in PCM form. If your digital audio system does not support Dolby Digital, select "PCM". The optical output terminal outputs audio signal in Dolby Digital form. Press a/b to select "H-Pos. " or "V-Pos. ".
Standby Mode
Standby Mode may be set to either start the TV quickly from standby or conserve energy while on standby.
1 2 3 4
Press MENU and the MENU screen displays.
H-Pos. V-Pos.
[ 0] [ 0]
a10 a20
b10 b20
Reset
Press c/d to select "Setup".
Selected item Description Centers the image by moving it to the left or right. Centers the image by moving it up or down.
Press a/b to select "Standby Mode", and then press ENTER. Press a/b to select "Mode1" or "Mode2", and then press ENTER.
Description Starting TV is quick from standby. V-Pos.
Selected item Mode1 Mode2
5 6
Press c/d to adjust the item to the desired position. Press MENU to exit.
5
Press MENU to exit.
30
NOTE · For resetting adjustments to the factory preset values, press a/b to select "Reset", and then press ENTER. · You can easily move the image position as shown on this page, but when the power is switched off the image will return to the previously memorized position.
Useful adjustment settings
Reset
If complex adjustments are made and the settings cannot be restored to normal, you can reset the settings to the factory preset values.
Input Select
1 2 3
Press MENU and the MENU screen displays.
Press c/d to select "Setup". Press a/b to select "Reset", and then press ENTER.
· "Return to the factory preset values" displays on the screen.
Selecting input source Use this menu to select the input source.
4
Press c/d to select "Yes", and then press ENTER.
· "Now, TV will restart automatically. OK?" displays on the screen.
1 2
Press INPUT.
· A list of selectable sources appears.
Press INPUT again to select the input source.
· An image from the selected source automatically displays. · If the corresponding input is not plugged in, you cannot change the input. Be sure to connect the equipment beforehand.
5
Press c/d to select "Yes", and then press ENTER.
· "Now Initializing" displays on the screen and blinks. [. . . ] (See page 17. ) · Is "Variable" selected in "Output Select"?(See page 34. )
Troubleshooting-Digital broadcasting
The error message about reception of broadcast
The example of an error message displayed on a screen · Failed to receive broadcast. Error code E202 E203 Possible Solution · Check the antenna cable. · Check the broadcast time in the program guide.
Cautions regarding use in high and low temperature environments
· When the unit is used in a low temperature space (e. g. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SHARP AQUOS LC-32DA5U
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SHARP AQUOS LC-32DA5U will begin.