User manual SHARP AQUOS LC-32D6U OPERATION MANUAL

[. . . ] The exclamation point within a triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. 1 ENGLISH IMPORTANT INFORMATION CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. CAUTION: DO NOT PLACE THIS PRODUCT ON AN UNSTABLE CART, STAND, TRIPOD, BRACKET, OR TABLE. THE PRODUCT MAY FALL CAUSING SERIOUS PERSONAL INJURY AND SERIOUS DAMAGE TO THE PRODUCT. USE ONLY WITH A CART, STAND, TRIPOD, BRACKET, OR TABLE RECOMMENDED BY THE MANUFACTURER OR SOLD WITH THE PRODUCT. [. . . ] If you select "Analog Search Start" and initiate the channel search, the CH Memory for Cable Digital will be deleted. 22 Basic adjustment settings Channel memory setting 3 Press a/b to select "Signal Strength". The signal strength of DIGITAL channel is displayed. The signal information is based on the current channel. Signal Strength Channel Strength 1 2 Press MENU to display the MENU screen, and then press c/d to select "Setup". Press a/b to select "CH Setup", and then press ENTER. If you already set the Secret No. , input the 4-digit secret number here. See page 40 for setting a secret number. Signal Strength 3 4 5 Press a/b to select "CH Memory", and then press ENTER. Press a/b to select ANALOG (Air), ANALOG (Cable), DIGITAL (Air) or DIGITAL (Cable), and then press ENTER. When viewing ANALOG broadcasts: 1 Press c/d to select the channel to skip, and then press b to move down. When viewing DIGITAL broadcasts: 1 Press a/b to select the channel to skip, and then press c/d to select "On". Current 0 Max 0 4 Press MENU to exit. Channel Strength The channel signal strength can also be checked separately. 1 2 3 Repeat steps 1 and 2 in Signal Strength in Antenna Setup - DIGITAL. Press a/b to select "Channel Strength", and then press ENTER. Input the 2-digit channel number to check the signal strength of the selected channel. Make sure the signal is strong enough for each channel. Signal Strength Channel Strength On: Skips channels. (Channel selection disabled using CH / . ) Off: Does not skip channels. (Channel selection enabled using CH / . ) 6 Press MENU to exit. 1 2 CH Signal Strength NOTE Make sure what kind of connection is made with your TV. Current 0 Max 0 Antenna Setup - DIGITAL In order to receive digital air broadcasts, you need a digital broadcast antenna. The maximum setting cannot be set to a smaller number than the minimum setting. The minimum setting cannot be set to a bigger number than the maximum setting. Depending on the brightness of the surrounding light, the OPC sensor might not operate if the adjustment range is small. Basic adjustment settings Sound adjustment You can adjust the sound quality to your preference with the following settings. Surround Surround function allows you to enjoy realistic "live" sound. 1 2 Press MENU to display the MENU screen, and then press c/d to select "Audio". Press a/b to select "Surround", and then press ENTER. Audio Power Control Treble [ 0] [ 0] [ 0] a15 a15 L b15 b15 R [Off] 1 Press MENU to display the MENU screen, and then press c/d to select "Audio". Audio Power Control Bass Balance Surround Reset Treble Bass Balance Surround Reset [ 0] [ 0] [ 0] a15 a15 L b15 b15 R [Off] 3 4 Press c/d to select "On", and then press ENTER. Press MENU to exit. 2 3 Press a/b to select a specific adjustment item. Press c/d to adjust the item to the desired level. cbutton For weaker treble For weaker bass dbutton For stronger treble For stronger bass NOTE You can choose Surround by pressing SURROUND on the remote control unit. (See page 18. ) Audio menu is grayed out when Output Select is set to "Variable". In this case, please refer to the operation manual of your DVD player. Selected item Treble Bass Balance Decrease audio from Decrease audio the right speaker from the left speaker 4 Press MENU to exit. NOTE Audio menu is grayed out when Output Select is set to "Variable". For resetting all Audio adjustment items to the factory preset values, press a/b to select "Reset", press ENTER, press c/d to select "Yes", and then press ENTER. 27 Basic adjustment settings Power Control Power control setting allows you to save energy. No signal off When set to "Enable", the power will automatically shut down if there is no signal for 15 minutes. Digital Setup This setting allows you to optimize the settings of Digital broadcasting. Audio Setup You can output digital audio to an AV amplifier or similar device whose DIGITAL AUDIO INPUT terminal is connected to the DIGITAL AUDIO OUTPUT terminal on the TV. Please select an audio output format compatible with the audio format of the program you are watching and the equipment connected. 1 2 3 Press MENU to display the MENU screen, and then press c/d to select "Power Control". [. . . ] The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units. Optional accessory The listed optional accessory is available for the Liquid Crystal Television. Please purchase it at your nearest shop. Additional optional accessories may be available in the near future. When purchasing, please read the newest catalogue for compatibility and check the availability. Part name Wall mount bracket Model number AN-52AG1 52 CLEARING THE SECRET NUMBER If you forget the secret number, clear the secret number using the following procedure. 1 2 Press MENU to display the MENU screen, and then press c/d to select "Setup". Press a/b to select "EZ Setup", "CH Setup", "Parental CTRL" or "Reset", and the Secret number input screen displays. Setup Secret No. [. . . ]