User manual SHARP 21K-FD5SM
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SHARP 21K-FD5SM. We hope that this SHARP 21K-FD5SM user guide will be useful to you.
Manual abstract: user guide SHARP 21K-FD5SM
Detailed instructions for use are in the User's Guide.
[. . . ] Audio input terminals (AV-2 IN) Connects to a camcorder, video game, etc. Video input terminal (AV-2 IN) Connects to a camcorder, video game, etc.
/
CH
Connecting to an antenna via a VCR
You can also connect the TV set to the tuner on a VCR using the connection shown below.
TV VCR
MENU/PRESET button Tunes the channels. Tunes or sets the channels.
/
Volume up/down buttons Adjusts the volume. Makes adjustments in PRESET.
Using headphone
To antenna in terminal To RF out terminal
[ Behind the door ]
Insert headphone plug into headphone jack to listen to audio with headphone. [. . . ] Used for MENU setup.
MENU
MANUAL
Normal screen
TV/VIDEO
· Press
SURROUND NORMAL
MENU/PRESET
until normal screen appears.
1 2 5 8 0 4 7
1
3 6 9
Mutes the sound and restores sound to previous level.
LANGUAGE
LANGUAGE
Calls the MENU screen.
NORMAL
Channel selection
!Using
CH
5
/
CH
CH
Changes the on-screen display language.
Resets all settings.
TV
· Press CH and channels change as shown below. / 2 / 1 / 0 . . .
CH
CH
MENU
CH
SURROUND LANGUAGE
NORMAL
LANGUAGE
TV
Displays the channel and timer settings on the screen.
@ With the number buttons (on remote control)
5 · To select a one-digit channel, such as 5, press . If to select one-digit input, "5-" is indicated, press 5 and then press again. · To select a two-digit channel, such as 15, press 1 to select the two-digit input. Press , and then 5 press .
-115 PAL
B/G
Installing batteries in the remote control unit
a
With your thumbnail, pull up at the slit to open the battery cover.
b
Insert two batteries (size AA).
c
Replace the battery cover.
Adjusting volume
!Adjust volume using
/
.
· The volume bar disappears approximately three seconds after the volume has been adjusted.
VOLUME 10
· When the power indicator lights up dimly, either CH / CH · Channels that have been skipped cannot be selected by CH · The AV1, AV2 input channels cannot be selected using CH these channel.
on the TV can be pressed to turn on the power. Use TV/VIDEO to select /
E6
PRESETTING CHANNELS
E7
SETTING AND ADJUSTMENT
Auto channel tuning
Automatically tunes in and presets receivable TV stations.
Channel setting
Enables individual channel setting.
AUTO(B/G) VHF 1 48. 25MHz
!again to display AUTO mode screen.
changes the screen as shown below.
MANUAL Normal screen
!Press @ Press
# Press
PAL B/G
MENU
to call MENU screen.
/
/
CH
MENU PICTURE SOUND FEATURE TIMER CH-SETTING
CH :SELECT :ENTER
TV/VIDEO
MENU/PRESET
CH
to select "CH-SETTING".
to display CH-SETTING
1 4 7
2 5 8 0
3 6 9
· Pressing
Language
MENU/PRESET
CH CH
AUTO
MENU:RETURN
# Press
/
on TV set.
1
[ Behind the door ]
menu.
CH CH
MENU
· All the TV stations in your area that can be received by the TV set are automatically preset between channels 1 to 99. · The screen shows whatever is on channel 1 when auto channel preset is finished.
$ Press
CH-SETTING
CH
/
CH
to select desired setting.
% Each time you press
MENU/PRESET
/ , setting for individual items changes as follows:
POSITION COLOUR SOUND SKIP FINE
CH :SELECT :ADJUST
CH27 AUTO B/G OFF 168. 25MHz
MENU
SURROUND LANGUAGE NORMAL
MENU:RETURN
TV
· POSITION The channel position changes to the higher or lower number. This is useful for timer cooking while you watch TV.
Channel / Timer display
Displays the current channel number, the timer, and other settings on the screen.
!Press
.
TV/VIDEO
TIMER OFF ON POSITION VOLUME --:---:---:-1 4 2 5 8 0
TV/VIDEO
/
/
CH
to select " ".
to set time.
3 6 9
# Press
CH CH
7
TIMER OFF ON POSITION VOLUME --:---:-1:50
· Maximum time that can be preset is 12 hours and 50 minutes. · The right example shows that the Reminder will be activated after one hour 50 minutes.
CH CH
MENU
· The time remaining on the Off timer, On timer, and Reminder appears on the screen. · When no timer is set, the channel number, colour and sound system appear on the screen. again to clear these current settings · Press display on the screen.
1 4
2 5 8 0
3 6 9
OFF ON
2:30 8:00 1:50
7
Number buttons
CH CH
MENU
PAL B/G
LANGUAGE
5
SURROUND
NORMAL
MENU
SURROUND LANGUAGE NORMAL
@ Press
again, the channel number, colour and sound system appear on the screen.
TV
$ Press
MENU
until normal screen appears.
TV
0:05
· Five minutes before the preset length of time expires (in the example, after one hour and 45 minutes) and each minute thereafter, the remaining time appears on the screen for several seconds. · When the preset length of time has passed, " 0:00" flashes in red.
0:04
0:03
Mute
Silences the sound.
0:02
0:01
!Press
.
" appears on the screen, and the sound
0:00
Flashing
· Press , " is silenced.
E9
FEATURES
@ Press
level.
, the volume returns to its previous
is pressed at any time.
· Mute will be cancelled if the
Blue screen
Automatically turns the screen blue if a broadcast signal is not received.
!Press @ Press # Press $ Press % Press
No signal
MENU
CH
to call MENU screen.
/
/
/
CH
Channel recall
MENU PICTURE SOUND FEATURE TIMER CH-SETTING
CH :SELECT :ENTER
Switches back to the channel you were watching just before the current channel.
to select "FEATURE".
to display FEATURE menu.
to select "BLUE BACK" to "ON" or "OFF".
Press
MENU:RETURN
.
PAL
5
· The channel previously viewed returns to the screen.
PAL
7
MENU
until normal screen appears.
Blue screen TV off (Indicator)
FEATURE BLUE BACK ON
When BLUE BACK is set to "ON".
Example: After switching from channel 5 to channel 7, the channel will change to channel 5. Press return to channel 7.
is pressed, again to
PAL
5
PAL
7
:ADJUST
MENU:RETURN
after 5 seconds
after 15 minutes Standby mode Power indicator lights up dimly
· The Reminder also works in the Standby mode. Power is automatically turned on five minutes before the preset length of time expires. The TV set automatically returns to the Standby mode approximately 1 minute if no buttons are pressed on the TV set or remote control. [. . . ] ON : Setting to this mode during stereo signal reception produces a spacious sound, making the most of the speakers' performance. : Setting to this mode during monaural signal reception creates monaural sound that is similar to stereophonic sound.
SURROUND OFF
Yellow : To VIDEO White : To AUDIO (L) Red : To AUDIO (R)
To Audio/Video out terminals
Example use of rear terminals
TV For Playback DVD Player
SURROUND ON SURROUND ON
ON
Yellow : To VIDEO White : To AUDIO (L) Red : To AUDIO (R)
For Recording and Editing VCR
To Audio/ Video out terminals
To Audio/ Video in terminals
VCR
To Audio/ Video out terminals
· For playback of monaural audio, connect the external source to the audio input left terminal on the front or rear of the TV set (MONO) to hear the same sound from both speakers. · The audiovisual cords required to connect the TV set with video equipment may differ from those shown in the above diagram. See the operation manual of your video equipment for connection details. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SHARP 21K-FD5SM
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SHARP 21K-FD5SM will begin.