User manual ROLAND VS8F-2 MANUAL 2

[. . . ] The VS8F-2 is an expansion board which adds effect functionality to your device. For more about equipment which is able to use the VS8F-2, please contact a nearby Roland service center or your dealer. [. . . ] To avoid the risk of damage to internal components that can be caused by static electricity, please carefully observe the following whenever you handle the board. ⷠBefore you touch the board, always first grasp a metal object (such as a water pipe), so you are sure that any static electricity you might have been carrying has been discharged. Save the bag in which the board was originally shipped, and put the board back into it whenever you need to store or transport it. To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power on all devices before making any connections. * In the interest of product improvement, the specifications and/or contents of this package are subject to change without prior notice. Used for instructions intended to alert the user to WARNING the risk of death or severe injury should the unit be used improperly. Used for instructions intended to alert the user to the risk of injury or material damage should the unit be used improperly. The specific meaning of the symbol is determined by the design contained within the triangle. In the case of the symbol at left, it is used for general cautions, warnings, or alerts to danger. The symbol alerts the user to items that must never be carried out (are forbidden). The specific thing that must not be done is indicated by the design contained within the circle. In the case of the symbol at left, it means that the unit must never be disassembled. [. . . ] Never use or store the unit in places that are: · , direct sunlight in an enclosed vehicle, near a heating duct, on top of heat-generating equipment); or are · In households with small children, an adult should provide supervision until the child is capable of following all the rules essential for the safe operation of the unit. Before installing the VS8F-2, you must first always turn off the specified unit and unplug its power cord. [. . . ]