User manual ROLAND VR-760 MANUAL 2

[. . . ] Owner's Manual Thank you, and congratulations on your choice of the Roland Performance Keyboard VR-760. 201b Before using this unit, carefully read the sections entitled: "IMPORTANT SAFETY INSTRUCTIONS" (Owner's manual p. These sections provide important information concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every feature provided by your new unit, Owner's manual should be read in its entirety. The manual should be saved and kept on hand as a convenient reference. 202 Copyright © 2003 ROLAND CORPORATION All rights reserved. [. . . ] The range increases as the value is raised. Send Bank LSB (0­127) When switching registrations, you can transmit the Bank Select Number LSB (Control Number 32) over an external part MIDI channel. When set to OFF, "L---" appears in the display. Changing the Depth of Reverb Reverb Level (0­127) This sets the depth of reverb. This setting performs the same function as the panel [REVERB] knob. These messages are not transmitted when Tx PC Switch (p. 68) is set to OFF. The LSB cannot be changed when MSB is set to OFF (when "M---" is displayed). 70 Detailed Settings for Each Function (EDIT) Organ Settings for Registrations (REGISTRATION ORGAN) Organ Volume (0­127) This changes the volume level of the organ part. This setting performs the same function as the panel [ORGAN VOLUME] knob. Setting the Percussion Decay Speed Percussion Slow Time (0­127) Sets the speed at which the percussion sound will decay when percussion is set to Slow (the [SLOW] button's indicator is lit). Percussion Fast Time(0­127) Sets the speed at which the percussion sound will decay when percussion is set to Fast (the [SLOW] button's indicator is dark). Increasing this value causes the percussion to decay more slowly. Organ Octave Shift (-2­+2) This changes the pitch of the organ part in octave units. Organ Fine Tune (-50­+50) This adjusts the pitch of the organ part in cent (1/100 semitone) units. Setting the Charge Time of the Percussion Percussion Recharge Time (0­10) Specifies the percussion charge time that determines the time from when the keys are released until percussion is recharged. Increasing this value will increase the time necessary for percussion to recharge, causing the percussion sound to be smaller for rapidly repeated notes. Setting the Leakage Noise Volume Leakage Level (0­127) This sets the volume of the leakage noise. The volume increases as the value is raised. EDIT What is the Percussion Recharge Time? When the wheel type is set to "VINTAGE1, VINTAGE2, " the leakage noise is never completely eliminated, even when the value is set to the minimum. This meant that if only a very short time elapsed from when the keys were released until the next key was pressed, the percussion circuit was unable to recharge fully, and the percussion sound that was added would therefore be lower in volume. This also meant that even if legato was broken during a rapid trill, etc. , an appropriate amount of percussion was added. The percussion recharge time parameter adjusts this charge time. Setting the Click Sound Level Key On Click Level (0­31) Specifies the level of the click sound that occurs when a key is pressed (On). Increasing this value will increase the volume. Key Off Click Level (0­31) Specifies the level of the click sound that occurs when a key is released (Off). Increasing this value will increase the volume. Adjusting the H-Bar Volume Level When Percussion is Normal Percussion H-Bar Level (0­127) Adjusts the volume of the harmonic bars when percussion is normal (the [SOFT] button's indicator is dark). As this value is increased, the sound of the harmonic bars will be less affected by the percussion. Setting the Percussion Volume Level Percussion Soft Level (0­15) Sets the percussion volume when percussion is set to Soft (the [SOFT] button's indicator is lit). Increasing this value will increase the volume of percussion. Percussion Norm Level (0­15) Sets the percussion volume when percussion is set to Normal (the [SOFT] button's indicator is dark). Increasing this value will increase the volume of percussion. On tone wheel organs, turning the percussion on would lower the overall volume specified by the harmonic bars. This is because the percussion on tone wheel organs was designed not to impair the volume balance of the entire organ. The VR-760 allows you to adjust this change in volume balance. 71 Detailed Settings for Each Function (EDIT) Adjusting the Amount of Overdrive Overdrive Level (0­127) This adjusts the amount of the overdrive (distortion) effect applied. The sound becomes more distorted more as the value is increased. Setting the Rotary Speed Rotary Woofer Slow Speed (0­127) Specifies the rotational speed for the Slow setting of the rotary speaker. Increasing the value raises the speed. Settings the Spread of the Speaker Rotary Woofer Spread (0­10) Specify the spaciousness of the low-range speaker (woofer). Increasing this value will increase the sense of stereo. Rotary Tweeter Slow Speed (0­127) Specifies the rotational speed for the Slow setting of the rotary speaker. Increasing the value raises the speed. Rotary Woofer Fast Speed (0­127) Specifies the rotational speed for the Fast setting of the rotary speaker. [. . . ] No. 18 Anhuaxili Chaoyang District, Beijing, CHINA TEL: (010) 6426-5050 NEW ZEALAND Roland Corporation Ltd. 32 Shaddock Street, Mount Eden, Auckland, NEW ZEALAND TEL: (09) 3098 715 DENMARK Roland Scandinavia A/S Nordhavnsvej 7, Postbox 880, DK-2100 Copenhagen DENMARK TEL: 3916 6200 SWEDEN Roland Scandinavia A/S SWEDISH SALES OFFICE Danvik Center 28, 2 tr. S-131 30 Nacka SWEDEN TEL: (0)8 702 00 20 TURKEY Barkat muzik aletleri ithalat ve ihracat Ltd Sti Siraselviler Caddesi Siraselviler Pasaji No:74/20 Taksim - Istanbul, TURKEY TEL: (0212) 2499324 HONG KONG Tom Lee Music Co. , Ltd. Service Division 22-32 Pun Shan Street, Tsuen Wan, New Territories, HONG KONG TEL: 2415 0911 CENTRAL/LATIN AMERICA ARGENTINA Instrumentos Musicales S. A. Av. Santa Fe 2055 (1123) Buenos Aires ARGENTINA TEL: (011) 4508-2700 FRANCE Roland France SA 4, Rue Paul Henri SPAAK, Parc de l'Esplanade, F 77 462 St. Thibault, Lagny Cedex FRANCE TEL: 01 600 73 500 SWITZERLAND Roland (Switzerland) AG Landstrasse 5, Postfach, CH-4452 Itingen, SWITZERLAND TEL: (061) 927-8383 FINLAND Roland Scandinavia As, Filial Finland Elannontie 5 FIN-01510 Vantaa, FINLAND TEL: (0)9 68 24 020 UKRAINE TIC-TAC Mira Str. [. . . ]