User manual ROLAND V-440HD

[. . . ] Owner's Manual 201b Before using this unit, carefully read the sections entitled: "IMPORTANT SAFETY INSTRUCTIONS" (p. These sections provide important information concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every feature provided by your new unit, Owner's Manual should be read in its entirety. The manual should be saved and kept on hand as a convenient reference. 202 Copyright © 2005 ROLAND CORPORATION All rights reserved. [. . . ] Use of certain functions together may result in disruption of the video images. We recommend testing settings configurations beforehand when switching PANEL PRESET settings. Related Page p. 50 P in P PATTERN Buttons (SD) P in P LOCK Button (SD) LEVEL Knob (SD) KEY ON Button (SD) Key Type (SD) Key Soft Edge (SD) A-BUS Channel Button (SD) B-BUS Channel Button (SD) TIME Knob (SD) Video Fader (SD) TRANSITION Button (SD) P in P PATTERN Buttons (HD/RGB) P in P LOCK Button (HD/RGB) LEVEL Knob (HD/RGB) KEY ON Button (HD/RGB) Key Type (HD/RGB) Key Soft Edge (HD/RGB) C-BUS Channel Button (HD/RGB) D-BUS Channel Button (HD/RGB) TIME Knob (HD/RGB) Video Fader (HD/RGB) TRANSITION Button (HD/RGB) OUTPUT FADE MODE OUTPUT FADE LEVEL Multi Screen On/Off Multi Screen Type Saving PANEL PRESET Settings To save PANEL PRESET settings, hold down the desired PANEL PRESET button for at least five seconds. Once the PANEL PRESET is saved, all of the PANEL PRESET buttons 1-8 flash. * 38 SD Section HD/RGB Section Others Copying Presets Use the following procedure to copy settings from one PANEL PRESET to another PANEL PRESET button. The preset shown at the left of the screen is copied to the PANEL PRESET button selected in Step 6. Note that any settings in the copy-destination PANEL PRESET are overwritten when this operation is executed. The content of the V-440HD's internal memory cannot be written to any external device. Other Operations Exchanging Presets Use the following procedure to exchange settings stored in one PANEL PRESET with settings stored at another PANEL PRESET button. Exchange. " Multi-Screen Output With MIDI used to link multiple V-440HDs, you can then use the "multiscreen output, " whereby the video is partitioned and output to multiple screens. With "multiscreen output, " one V-440HD is used for control, with the operation of other V-440HDs synchronized to it. The preset shown at the left of the screen becomes the exchange source. Press the ENTER button. Output Output Output Video Video MIDI MIDI Slave1 Slave2 Select the preset exchange destination. Select "Yes. " The V-440HD used as the control device is referred to here as the "master. " The other V-440HDs whose operations are synchronized to the master are referred to as "slaves. " 9. The preset shown at the left of the screen is exchanged with the preset stored to the PANEL PRESET button selected in Step 6. Connection Instructions for Multi-Screen Output When using multiscreen output, use the following method to connect the V-440HD with other devices. * When making any connections, always be sure to turn off the power to all devices before connecting them. Connecting When Two Screens Are Used When using multiscreen output with two screens, connect the master and the slave directly to each other. [Connecting Diagram] [HD/RGB] [SD] Component - D-sub MIDI Composite - Video Master Loop Through Slave 1. When using multiscreen output with two screens, use loop thru to distribute the video from the HD/RGB input to the two V-440HDs (p. * When using loop thru, set the HD/RGB 75 TERMINATOR switch to OFF. 39 Other Operations 2. Using a MIDI cable, connect the master V-440HD's MIDI OUT/ THRU connector to the MIDI IN connector on the slave V-440HD. Connect the left screen to the master V-440HD's HD OUT or RGB connectors. Connect the right screen to the slaved V-440HD's HD OUT or RGB connectors. Making the Multi-Screen Settings After connecting the devices according to the procedures described on p. Multi Screen. " Connecting When Three or More Screens Are Used Using multiscreen output with three or more screens requires use of to distribute the video and MIDI signals for the master and multiple connected slaves. * Satisfactory image quality may not be obtainable using loop thru to distribute the video to three or more V-440HD. 3. * For more on the screen position, refer to "Slave Numbers and Screen Positions. " [Connecting Diagram] HD Distributer [HD] 4. Multi Screen ID. " This sets the screen positions for the master and slave V-440HDs. [. . . ] 16 TIME Display (SD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 TIME Knob . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 TIME knob . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 TIME Knob (HD/RGB) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]