User manual ROLAND TU-80

[. . . ] Beat Indicator: This indicates the beat setting when * * is equivalent to one beat. When the beat is set to "0, " a fixed, steady sound is played. When the rhythm style is set to "6" or "7" (when set to claves), this sets the number of times the basic pattern is repeated. Tempo Indicator: This can be set within a range from This warranty is valid only in Japan. Using the Tuner 1. [. . . ] The next time the power is on, Auto Power Off function will once again activated. 5. The note name/string number for the note that is playing appears in the display. The meter and Tuning Guide show how far the note is from the correct pitch. With the intended note name/string number appearing in the display, tune the instrument so that both " " and " " of the Tuning Guide are lit, and the meter needle points to 0 (center position). When a stable pitch is achieved, the tuner makes a beeping sound, informing you that the tuning is completed (when the Accu-Pitch function is set to on). Using the Metronome 1. The metronome alternately starts and stops each time you press [METRONOME]. In necessary, use [SELECT] and VALUE [ ] or [ ] to set the rhythm style, beat and tempo. Holding down VALUE [ ] or [ ] when setting the tempo causes the values to change more rapidly. 2. OUTPUT Jack: The signal of the instrument connected to the INPUT jack is output from this jack. The tuner's circuitry is completely bypassed once you switch the power off, so your instrument's signal is output without any change in the tone quality. * The metronome sound will not be output. Memory Function Once batteries are installed in the TU-80, a number of different settings can be stored in memory, where they'll be preserved even while the power is turned off. Removing the batteries returns the TU-80 to its original factory settings. * The settings for the Auto Power Off function and the [SOUND] button On/Off are not saved. [Tuner] Tuning Mode: CHROMATIC, Reference Pitch: 440 Hz, Accu-pitch Function: On, Flat Tuning: Regular, Sound: Off [Metronome] Tempo: 120, Rhythm Style: 0 (Quarter note), Beat: 4, Sound: On 5. When in tuner mode: In CHROMATIC mode, you can play any of the twelve notes in the chromatic scale. In GUITAR/BASS mode, pitches corresponding to the open strings are played. When changing the name of the note or the number for the string being tuned, press [SOUND] and then press VALUE [ ] or [ ] to select the note name or string number. * The tuning function is disabled unless the TU-80's sound is muted. [. . . ] INPUT Jack: Connect the guitar, bass guitar, or other instrument to be tuned here. Do not connect anything to the INPUT or OUTPUT jacks when using the mic. 10. Guide Indicators: These light to show how close you are to the target pitch. When " When " " lights: pitch is flat (low). " and " " light: in tune (±3 cents). Main Features · Tuner - Reference Pitch: A4=435 Hz-446 Hz (1 Hz steps) - Tuning Range: E0 (20. 6 Hz)-C8 (4186. 0 Hz) - Internal Tuning Accuracy: ±1 cent · Metronome - Tempo: 30-250 - Rhythm Style: Quarter note, Eighth rest and eighth note, Eighth note, Triple, Triple with center rest, Sixteenth note, Clave (3-2, 2-3) - Beat: 0-9 · Input Impedance: 680 k · Indicator: LCD Display, Tuning Guide LED · Connectors: Input Jack, Output Jack · Power Supply: Dry Battery (R6/LR6 (AA) Type) x 2 · Power Consumption: 3 mA (Metronome mode), 8 mA (Tuner mode and A4=440 Hz input) - Expected battery life under continuous use (Carbon): Approximately 100 hours (A4 continuous input) * These figures will vary depending on the actual conditions of use. [. . . ]