User manual ROLAND SRJV80-16

[. . . ] (X. XXX is the version number. ) fig. update-1 Update Main System Program ? [. . . ] -[EZ ROUTING User Routing] [ EFFECT User Patch ] [NO] is Init User Setting YES/NO 3. Normally you should press the [ENTER/YES] button. Doing so will damage the system program, rendering the SRJV80-16 unable to function. 4. To return the SRJV80-16 to the factory settings, press the [EXIT/NO] button at this point, and then press the [ENTER/YES] button in response to the confirmation message that follows. When the update has been completed, a display of "Please Reboot OK" will appear; turn off the power. To complete the update procedure, follow the steps described in "Checking the version number" to verify that the update was performed successfully. 5. When the SRJV80-16 drive appears on your computer, copy the system program to the root directory of the lowest-numbered drive (= the VS2000CD's IDE:0). Cancel the connection to your computer. 4. · Windows Use "Safely Remove Hardware" (shown in the taskbar) to cancel the connection to the SRJV80-16. · Macintosh Drag the SRJV80-16 icon from the desktop into the trash to cancel the connection to the SRJV80-16. 5. On Windows, wait for the "Safely Remove Hardware" popup to appear on your computer, and then disconnect the USB cable from the VS2000CD. On Macintosh, disconnect the USB cable from the SRJV80-16 after you have finished dragging the icon into the trash. 6. When the update is completed, the version information screen will appear. [. . . ] When the update is completed, the version information screen will appear. [. . . ]