User manual ROLAND SR-JV80-15

[. . . ] At this time the wave file will automatically be converted (encoded) into a format that allows VariPhrase processing to be used. The samples shown in the sample list can be played directly from your MIDI keyboard. To display the Sample List, click the [b] (Sample Info) button located at the bottom of the screen. 15) Sample Edit lets you set various parameters for the samples in the sample list. [. . . ] Shortcut: [Ctrl] + [C] / [ ] + [C] Paste Pastes the data from the clipboard at the current time location (the vertical line; normally the location where you clicked the mouse). Shortcut: [Ctrl] + [V] / [ ] + [V] 91 Menu reference Delete Deletes the selected frame or note. Unlike the Cut command, the deleted data will not be placed in the clipboard. Shortcut: [Delete] Repeat (Repeat copy) fig. 02-07 Repeatedly copies the frame selected in the Vari Track. The "Repeat Copy" dialog box will appear, allowing you to input the number of times that you want to copy the frame. The frame will be copied the corresponding number of times, following the selected frame. Shortcut: [Ctrl] + [R] / [ ] + [R] Quantize Quantize is a function that moves the location of a note to left or right so that the note is aligned closer to the grid interval you specified in Quantize Grid. You can execute Quantize on a frame selected in the Vari Track, or on notes selected in the Scope Editor. * If you select a frame in the Vari Track, quantization will be applied to the notes within the frame, not to the frame itself. * When selecting frames in the Vari Track, it is not possible to apply quantization to two or more selected frames. Shortcut: [Shift] + [Q] Quantize Grid Specifies the grid toward which the Quantize function will align the notes. If you press the play button in this state, playback will begin smoothly. Move Current Position Moves the current time (playback cursor) to the specified measure/beat/tick. Alternatively, you can press the [. . . ] button in the Move Position dialog box, and specify a time or marker instead of the measure/beat/tick. Shortcut: [J] 96 Menu reference Prev Marker (To previous marker) Moves the current time to the previous marker. Shortcut: [Ctrl] + [Page Up] / [ ] + [page up] (pg up) Next Marker (To next marker) Moves the current time to the next marker. Shortcut: [Ctrl] + [Page Down] / [ ] + [page down] (pg dn) 97 Menu reference Option menu fig. 02-17 MIDI/AUDIO Settings On Mac OS, V-Producer supports two MIDI drivers: OMS and FreeMIDI. If your system has both of these MIDI drivers, a screen will appear the first time you start up V-Producer, allowing you to select either OMS or FreeMIDI. You can also choose between OMS or FreeMIDI in this MIDI Settings dialog box. (However, if no driver is installed in your system, you will not be able to choose between OMS and FreeMIDI. ) For details on installing the OMS or FreeMIDI compatible drivers, refer to "About the included MIDI drivers" in User Guide. 1. fig. 02-midi01 In the MIDI Device area, specify the MIDI port to which the VariOS is connected. Normally, you will select VariOS MIDI, as shown in the diagram. If nothing is displayed in the port field, it is possible that the VariOS USB MIDI driver was not installed correctly. Check the connection between the VariOS and the computer, and install the USB MIDI driver using the procedure described in "Installation" (User Guide). OS On the Macintosh, the name you assigned in step 8 of "OMS Settings" MacOS (User Guide) will be displayed. [. . . ] In Control Change messages, the 2nd byte is the controller number, and the 3rd byte is the parameter value. MIDI allows what is known as "running status, " when if messages of the same status follow each other, it is permitted to omit the second and following status bytes. In the message above, running status is being used, meaning that the message has the following content. B3 64 00 (B3) 65 00 (B3) 06 0C (B3) 26 00 (B3) 64 7F (B3) 65 7F MIDI CH = 4, RPN parameter number LSB: 00H MIDI CH = 4, RPN parameter number MSB: 00H MIDI CH = 4, parameter value MSB: 0CH MIDI CH = 4, parameter value LSB: 00H MIDI CH = 4, RPN parameter number LSB: 7FH MIDI CH = 4, RPN parameter number MSB: 7FH Examples of Exclusive Messages and Calculating the Checksum Roland exclusive messages (RQ1, DT1) are transmitted with a checksum at the end of the data (before F7) to check that the data was received correctly. [. . . ]