User manual ROLAND SR-JV80-05

[. . . ] Before using this unit, carefully read the sections entitled: "USING THE UNIT SAFELY" and "IMPORTANT NOTES" (p. These sections provide important information concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every feature provided by your new unit, this Owner's Manual should be read in its entirety. The manual should be saved and kept on hand as a convenient reference. [. . . ] Change the settings as described in "Driver Signing Options Setting (Windows XP)" (p. When "Ready to install the driver. " appears, connect the USB cable of the SR-JV80-05 to the computer. It may take several minutes for the driver to be installed. Windows7/WindowsVista If other messages appear, follow the instructions on the screen. The driver will be installed automatically. WindowsXP "Found new hardware" will appear in the lower-right corner of the screen. Windows7/WindowsVista WindowsXP 10 Driver Installation Windows7/WindowsVista 9. When "Installation has been completed. " appears, click [Close]. Close the "SR-JV80-05 Driver Setup" dialog box. If the "Change System Settings" dialog box appears, click [Yes] to restart Windows. Installation complete. WindowsXP 9. If a dialog box that asks whether you want to connect to Windows Update appears, select [No, not this time] and click [Next]. 10. Select [Install the software automatically (Recommended)] and click [Next]. If the "Hardware Installation" dialog box appears, click [Continue Anyway] to proceed with installation. 12. When "Completing the Found New Hardware Wizard" appears, click [Finish]. Click the SR-JV80-05's down arrow. If the settings are correct, the SR-JV80-05's MIDI OUT indicator will blink. 20. Close the "MIDI Studio" window or the "Audio MIDI Setup" dialog box. Installation complete. 13 Basic Use Precautions Concerning the Use of Software Before using the SR-JV80-05 with your software, please note the following points. To have the device name appear without the numeral, connect the SR-JV80-05 to the same USB connector used during installation, or reinstall the driver (p. 22). Numeral such as "2-" appears at beginning of device name (Windows) Did you connect the SR-JV80-05 to a different USB connector than the one you used when installing the driver? Using the SR-JV80-05 Problem Confirmation Is the driver installed?Exit all programs that are using the SR-JV80-05, disconnect the SR-JV80-05's USB cable, and then reconnect it. Did the computer enter standby (suspend) mode, hibernate mode, or sleep mode while the SR-JV80-05 was connected?Did you disconnect and reconnect the USB cable while using the SR-JV80-05?Exit all programs that are using the SR-JV80-05, disconnect the SR-JV80-05's USB cable, and then reconnect it. Exit all programs that are using the SR-JV80-05, disconnect the SR-JV80-05's USB cable, and then reconnect it. Was the SR-JV80-05 connected to the computer while the computer was starting up?(Windows 7/Windows Vista) Connect the SR-JV80-05 after the computer has started up. (With some computers, the SR-JV80-05 cannot be used if it is connected to the computer while the computer is starting up. ) Use different software. Is the SR-JV80-05's USB indicator off? Is the SR-JV80-05's device name displayed? Cannot select or use SR-JV80-05 device 17 Troubleshooting Problem Cannot select or use SR-JV80-05 device Confirmation Have you configured "Audio MIDI Setup"? [. . . ] Set "Processor Performance" to [Highest]. 21 Troubleshooting Reinstalling the Driver If you experience problems installing the driver, use the following procedure and reinstall the driver. 1. Install the driver again as described in "Driver Installation" (p. 9). Deleting the Driver If the computer does not detect the SR-JV80-05 correctly, use the following procedure to delete the driver, and then install the driver again as described in "Driver Installation" (p. Start up the computer without the SR-JV80-05 connected. Disconnect all USB cables other than those for a USB keyboard and/or USB mouse (if used). 2. [. . . ]