User manual ROLAND SR-JV80-04

[. . . ] No part of this publication may be reproduced in any form without the written permission of ROLAND CORPORATION. About V-Cymbals, PD-6, and CY-6 Compatibility Trigger Types of the Latest Pads New trigger types have been changed to simplify making trigger settings for the following pads. All you need to do is select a specialized trigger type, and the various trigger parameters (except for Crosstalk Cancel) will automatically be set to the recommended values. [. . . ] For details, refer to "Changes in the MIDI Implementation" on the other side. New Pads: CY-15R, CY-14C, CY-12R/C, CY-12H, CY-6, PD-6 Trigger Type List The trigger types (Owner's Manual; p. Displayed on Screen PD5 PD6 PD7 PD9 8A 8B 8RA 8RB 10A 10B 12A 12B KD7 K8 K12 CY1 *2 CY2 *2 P1 K1 KIK *4 SNR *4 TOM *4 Device Used PD-5 PD-6 PD-7 (Strike position is detected) (*1) PD-9 (Strike position is detected) (*1) PD-80 (Strike position is detected) (*1) PD-80 (Strike position is not detected) PD-80R (Strike position is detected) (*1) PD-80R (Strike position is not detected) PD-100 (Strike position is detected) (*1) PD-100 (Strike position is not detected) PD-120 (Strike position is detected) (*1) PD-120 (Strike position is not detected) KD-5, KD-7 KD-80 KD-120 CY-6, CY-12R/C (*3) CY-12H, CY-14C, CY15R (*3) Pad made by another manufacturer Kick pad made by another manufacturer Acoustic drum trigger for kick Acoustic drum trigger for snare (rim shot-compatible) Acoustic drum trigger for tom-tom Changes in the Trigger Bank The following changes have been made in the content of the Trigger Bank (Owner's Manual; p. 128). fig. bank About the Trigger Type and Other Trigger Parameters When the trigger type (Owner's Manual; p. 131) automatically change to the values appropriate for each pad (except for Crosstalk Cancel). When adjusting the trigger parameters, first select the trigger type. *1: The positional sensing function works only with trigger input 3 (SNARE). 205) Identity Reply Status Data byte 7EH, dev, 06H, 02H, 41H, 20H, 01H, 00H, 00H, 00H, 02H, 01H, 00H Explanation software revision level Status F7H F0H Saving the Click Settings (Owner's Manual; p. 94) The most recent click settings are automatically saved when the power is turned off. * The beat setting adopts the beat of the pattern or song selected when the power is turned on. Byte 00H 02H 01H 00H Parameter address map s Parameter Address block (Owner's Manual; p. 208) *1-1-1-1 TRIGGER BANK (Pad parameters) +------------------------------------------------+ | Offset | Size | Description | | address | | | +------------------------------------------------+ | | 000a 0000 | PAD TYPE 0 - 21 | | | | (PD5, PD7, PD9, 8 A, | | | | 8 B, 8RA, 8RB, 10A, | | | | 10B, 12A, 12B, P 1, | | | | PD6, KD7, K 8, K12, | | | | K 1, CY1, KIK, SNR, | | | | TOM, CY2) | +------------------------------------------------+ "OFF" Added to the Pad Pattern Categories (Owner's Manual; p. 139) If you want to turn Pad Pattern off, you can now also do this by moving the cursor to either a pattern or category and selecting "OFF. " About GM Mode (Owner's Manual; p. [. . . ] 139) If you want to turn Pad Pattern off, you can now also do this by moving the cursor to either a pattern or category and selecting "OFF. " About GM Mode (Owner's Manual; p. 159) GM mode is now always set to "OFF" when the power is turned on. Concerning Play of the Demo Song (Owner's Manual; p. [. . . ]