User manual ROLAND RE-101

[. . . ] (Initial value is ON) For Drum Parts, not received when Rx. NOTE ON = OFF for each Instrument. n = MIDI channel number : 0H-FH (ch. 1-ch. 16) vv = Volume : 00H-7FH (0-127), Initial Value = 64H (100) * * Volume messages are used to adjust the volume balance of each Part. (Initial value is ON) Pan (Controller number 10) Polyphonic Key Pressure Status AnH 2nd bytes kkH 3rd byte vvH Status BnH 2nd bytes 0AH 3rd byte vvH n = MIDI channel number : 0H-FH (ch. 1-ch. 16) kk = note number : 00H-7FH (0-127) vv = key pressure : 00H-7FH (0-127) * * Not received when Rx. POLY PRESSURE (PAf) = OFF. (Initial value is ON) The resulting effect is determined by System Exclusive messages. With the initial settings, there will be no effect. n = MIDI channel number : 0H-FH (ch. 1-ch. 16) vv = pan : 00H-40H-7FH (Left-Center-Right), Initial Value = 40H (Center) * * For Rhythm Parts, this is a relative adjustment of each Instrument's pan setting. [. . . ] 40 00 04 MASTER VOLUME (= F0 7F 7F 04 01 00 vv F7) 40 00 05 00 00 01 28-58 MASTER KEY-SHIFT 40 00 06 00 00 01 01-7F MASTER PAN 40 00 7F 00 00 01 00 MODE SET (Rx. only) * Refer to "System exclusive messages related to Mode settings" (page 4). 00 00 01 00-7F Description -100. 0 - +100. 0 [cent] Default Value (H) 00 04 00 00 Description 0 [cent] 0-127 -24 - +24 [semitones] -63 (LEFT) - +63 (RIGHT) 00 = GS Reset 127 = Exit GS 7F 40 40 *** 127 0 [semitones] 0 (CENTER) 40 01 10 00 00 10 00-40 VOICE RESERVE Part 10 (Drum Part) 02 40 01 11# Part 1 06 40 01 12# Part 2 02 40 01 13# Part 3 02 40 01 14# Part 4 02 40 01 15# Part 5 02 40 01 16# Part 6 02 40 01 17# Part 7 02 40 01 18# Part 8 02 40 01 19# Part 9 02 40 01 1A# Part 11 00 40 01 :# : 40 01 1F# Part 16 00 * The sum total of voices in the voice reserve function must be equal to or less than the number of the maximum polyphony. The maximum polyphony of the KR375 with other GS models, it is recommended that the maximum polyphony be equal or less than 24. 40 01 30 00 00 01 00-07 REVERB MACRO 2 6 2 2 2 2 2 2 2 2 0 0 is 64. For compatibility 00: Room 1 04 Hall 2 01: Room 2 02: Room 3 03: Hall 1 04: Hall 2 05: Plate 06: Delay 07: Panning Delay 40 01 31 00 00 01 00-07 REVERB CHARACTER 0-7 04 4 40 01 32 00 00 01 00-07 REVERB PRE-LPF 0-7 00 0 40 01 33 00 00 01 00-7F REVERB LEVEL 0-127 40 64 40 01 34 00 00 01 00-7F REVERB TIME 0-127 40 64 40 01 35 00 00 01 00-7F REVERB DELAY FEEDBACK 0-127 00 0 * REVERB MACRO is a macro parameter that allows global setting of reverb parameters. When you select the reverb type with REVERB MACRO, each reverb parameter will be set to the most suitable value. The value of REVERB CHARACTER corresponds to the REVERB MACRO of the same number. 00: Chorus 1 02 Chorus 3 01: Chorus 2 02: Chorus 3 03: Chorus 4 04: Feedback Chorus 05: Flanger 06: Short Delay 07: Short Delay (FB) 40 01 39 00 00 01 00-07 CHORUS PRE-LPF 0-7 00 0 40 01 3A 00 00 01 00-7F CHORUS LEVEL 0-127 40 64 40 01 3B 00 00 01 00-7F CHORUS FEEDBACK 0-127 08 8 40 01 3C 00 00 01 00-7F CHORUS DELAY 0-127 50 80 40 01 3D 00 00 01 00-7F CHORUS RATE 0-127 03 3 40 01 3E 00 00 01 00-7F CHORUS DEPTH 0-127 13 19 40 01 3F 00 00 01 00-7F CHORUS SEND LEVEL TO REVERB 0-127 00 0 * CHORUS MACRO is a macro parameter that allows global setting of chorus parameters. When you use CHORUS MACRO to select the chorus type, each chorus parameter will be set to the most suitable value. 40 03 00 00 00 02 00 - 7F * Refer to EFX Type Table (P. 11) EFX TYPE (MSB, LSB) 00 00 - 7F 7F 00 01 Thru 40 01 38 00 00 01 00-07 CHORUS MACRO 7 * This EFX Type is current EFX type of this system. 40 1x 25 40 1x 28 40 1x 29# 40 1x 30 40 1x 31 40 1x 32 40 1x 33 40 1x 34 40 1x 35 40 1x 36 40 1x 37 00 00 01 00 00 03 00-01 00-7F TONE REMAIN Bank Select LSB Range OFF/ON 00 ON (OFF*) OFF OFF/ON LSB (from) LSB (to) -50 - +50 -50 - +50 -50 - +50 -50 - +50 -50 - +50 -50 - +50 -50 - +50 -50 - +50 01 40 43 40 40 40 40 40 40 40 40 ON 40H 43H 0 0 0 0 0 0 0 0 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 0E-72 0E-72 0E-72 0E-72 0E-72 0E-72 0E-72 0E-72 TONE MODIFY 1 Vibrato rate (= NRPN# 8) TONE MODIFY 2 Vibrato depth (= NRPN# 9) TONE MODIFY 3 TVF cutoff frequency (= NRPN# 32) TONE MODIFY 4 TVF resonance (= NRPN# 33) TONE MODIFY 5 TVF&TVA Env. attack (= NRPN# 99) TONE MODIFY 6 TVF&TVA Env. decay (= NRPN# 100) TONE MODIFY 7 TVF&TVA Env. release (= NRPN# 102) TONE MODIFY 8 Vibrato delay (= NRPN# 10) 40 1x 40 00 00 0C 00-7F SCALE TUNING C -64 - +63 [cent] 40 0 [cent] 40 1x 41# 00-7F SCALE TUNING C# -64 - +63 [cent] 40 0 [cent] 40 1x 42# 00-7F SCALE TUNING D -64 - +63 [cent] 40 0 [cent] 40 1x 43# 00-7F SCALE TUNING D# -64 - +63 [cent] 40 0 [cent] 40 1x 44# 00-7F SCALE TUNING E -64 - +63 [cent] 40 0 [cent] 40 1x 45# 00-7F SCALE TUNING F -64 - +63 [cent] 40 0 [cent] 40 1x 46# 00-7F SCALE TUNING F# -64 - +63 [cent] 40 0 [cent] 40 1x 47# 00-7F SCALE TUNING G -64 - +63 [cent] 40 0 [cent] 40 1x 48# 00-7F SCALE TUNING G# -64 - +63 [cent] 40 0 [cent] 40 1x 49# 00-7F SCALE TUNING A -64 - +63 [cent] 40 0 [cent] 40 1x 4A# 00-7F SCALE TUNING A# -64 - +63 [cent] 40 0 [cent] 40 1x 4B# 00-7F SCALE TUNING B -64 - +63 [cent] 40 0 [cent] * SCALE TUNING is a function that allows fine adjustment to the pitch of each note in the octave. The pitch of each identically-named note in all octaves will change simultaneously. 40 2x 00 40 2x 01 40 2x 02 40 2x 03 40 2x 04 40 2x 05 40 2x 06 40 2x 07 40 2x 08 40 2x 09 40 2x 0A 40 2x 10 40 2x 11 40 2x 12 40 2x 13 40 2x 14 40 2x 15 40 2x 16 40 2x 17 40 2x 18 40 2x 19 40 2x 1A 40 2x 20 40 2x 21 40 2x 22 40 2x 23 40 2x 24 40 2x 25 40 2x 26 40 2x 27 40 2x 28 40 2x 29 40 2x 2A 40 2x 30 40 2x 31 40 2x 32 40 2x 33 40 2x 34 40 2x 35 40 2x 36 40 2x 37 40 2x 38 40 2x 39 40 2x 3A 40 2x 40 40 2x 41 40 2x 42 40 2x 43 40 2x 44 40 2x 45 40 2x 46 40 2x 47 40 2x 48 40 2x 49 40 2x 4A 40 2x 50 40 2x 51 40 2x 52 40 2x 53 40 2x 54 40 2x 55 40 2x 56 40 2x 57 40 2x 58 40 2x 59 40 2x 5A 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 28-58 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 40-58 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 28-58 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 28-58 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 28-58 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 28-58 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F MOD PITCH CONTROL MOD TVF CUTOFF CONTROL MOD AMPLITUDE CONTROL MOD LFO1 RATE CONTROL MOD LFO1 PITCH DEPTH MOD LFO1 TVF DEPTH MOD LFO1 TVA DEPTH MOD LFO2 RATE CONTROL MOD LFO2 PITCH DEPTH MOD LFO2 TVF DEPTH MOD LFO2 TVA DEPTH BEND PITCH CONTROL BEND TVF CUTOFF CONTROL BEND AMPLITUDE CONTROL BEND LFO1 RATE CONTROL BEND LFO1 PITCH DEPTH BEND LFO1 TVF DEPTH BEND LFO1 TVA DEPTH BEND LFO2 RATE CONTROL BEND LFO2 PITCH DEPTH BEND LFO2 TVF DEPTH BEND LFO2 TVA DEPTH CAf PITCH CONTROL CAf TVF CUTOFF CONTROL CAf AMPLITUDE CONTROL CAf LFO1 RATE CONTROL CAf LFO1 PITCH DEPTH CAf LFO1 TVF DEPTH CAf LFO1 TVA DEPTH CAf LFO2 RATE CONTROL CAf LFO2 PITCH DEPTH CAf LFO2 TVF DEPTH CAf LFO2 TVA DEPTH PAf PITCH CONTROL PAf TVF CUTOFF CONTROL PAf AMPLITUDE CONTROL PAf LFO1 RATE CONTROL PAf LFO1 PITCH DEPTH PAf LFO1 TVF DEPTH PAf LFO1 TVA DEPTH PAf LFO2 RATE CONTROL PAf LFO2 PITCH DEPTH PAf LFO2 TVF DEPTH PAf LFO2 TVA DEPTH CC1 PITCH CONTROL CC1 TVF CUTOFF CONTROL CC1 AMPLITUDE CONTROL CC1 LFO1 RATE CONTROL CC1 LFO1 PITCH DEPTH CC1 LFO1 TVF DEPTH CC1 LFO1 TVA DEPTH CC1 LFO2 RATE CONTROL CC1 LFO2 PITCH DEPTH CC1 LFO2 TVF DEPTH CC1 LFO2 TVA DEPTH CC2 PITCH CONTROL CC2 TVF CUTOFF CONTROL CC2 AMPLITUDE CONTROL CC2 LFO1 RATE CONTROL CC2 LFO1 PITCH DEPTH CC2 LFO1 TVF DEPTH CC2 LFO1 TVA DEPTH CC2 LFO2 RATE CONTROL CC2 LFO2 PITCH DEPTH CC2 LFO2 TVF DEPTH CC2 LFO2 TVA DEPTH -24 - +24 [semitone] -9600 - +9600 [cent] -100. 0 - +100. 0 [%] -10. 0 - +10. 0 [Hz] 0-600 [cent] 0-2400 [cent] 0-100. 0 [%] -10. 0 - +10. 0 [Hz] 0-600 [cent] 0-2400 [cent] 0-100. 0 [%] 0-24 [semitone] -9600 - +9600 [cent] -100. 0 - +100. 0 [%] -10. 0 - +10. 0 [Hz] 0-600 [cent] 0-2400 [cent] 0-100. 0 [%] -10. 0 - +10. 0 [Hz] 0-600 [cent] 0-2400 [cent] 0-100. 0 [%] -24 - +24 [semitone] -9600 - +9600 [cent] -100. 0 - +100. 0 [%] -10. 0 - +10. 0 [Hz] 0-600 [cent] 0-2400 [cent] 0-100. 0 [%] -10. 0 - +10. 0 [Hz] 0-600 [cent] 0-2400 [cent] 0-100. 0 [%] -24 - +24 [semitone] -9600 - +9600 [cent] -100. 0 - +100. 0 [%] -10. 0 - +10. 0 [Hz] 0-600 [cent] 0-2400 [cent] 0-100. 0 [%] -10. 0 - +10. 0 [Hz] 0-600 [cent] 0-2400 [cent] 0-100. 0 [%] -24 - +24 [semitone] -9600 - +9600 [cent] -100. 0 - +100. 0 [%] -10. 0 - +10. 0 [Hz] 0-600 [cent] 0-2400 [cent] 0-100. 0 [%] -10. 0 - +10. 0 [Hz] 0-600 [cent] 0-2400 [cent] 0-100. 0 [%] -24 - +24 [semitone] -9600 - +9600 [cent] -100. 0 - +100. 0 [%] -10. 0 - +10. 0 [Hz] 0-600 [cent] 0-2400 [cent] 0-100. 0 [%] -10. 0 - +10. 0 [Hz] 0-600 [cent] 0-2400 [cent] 0-100. 0 [%] 40 40 40 40 0A 00 00 40 00 00 00 42 40 40 40 00 00 00 40 00 00 00 40 40 40 40 00 00 00 40 00 00 00 40 40 40 40 00 00 00 40 00 00 00 40 40 40 40 00 00 00 40 00 00 00 40 40 40 40 00 00 00 40 00 00 00 0 [semitones] 0 [cent] 0 [%] 0 [Hz] 47 [cent] 0 [cent] 0 [%] 0 [Hz] 0 [cent] 0 [cent] 0 [%] 2 [semitones] 0 [cent] 0 [%] 0 [Hz] 0 [cent] 0 [cent] 0 [%] 0 [Hz] 0 [cent] 0 [cent] 0 [%] 0 [semitones] 0 [cent] 0 [%] 0 [Hz] 0 [cent] 0 [cent] 0 [%] 0 [Hz] 0 [cent] 0 [cent] 0 [%] 0 [semitones] 0 [cent] 0 [%] 0 [Hz] 0 [cent] 0 [cent] 0 [%] 0 [Hz] 0 [cent] 0 [cent] 0 [%] 0 [semitones] 0 [cent] 0 [%] 0 [Hz] 0 [cent] 0 [cent] 0 [%] 0 [Hz] 0 [cent] 0 [cent] 0 [%] 0 [semitones] 0 [cent] 0 [%] 0 [Hz] 0 [cent] 0 [cent] 0 [%] 0 [Hz] 0 [cent] 0 [cent] 0 [%] 0 40 4x 23 00 00 02 00 - 7F PART EFX TYPE (MSB, LSB) 00 00 - 7F 7F 00 00 * This EFX type is same to EFX type of System Parameter. When this EFX type is same to EFX type of System parameter (see the page. 7), the part connect to EFX. 40 4x 25# 40 4x 26# 00 00 01 00 00 01 00 - 7F 00 - 7F PART EFX MACRO PART EFX DEPTH 00 00 00 00 0 0 10 Drum Setup Parameters * * m: Map number (0 = MAP1, 1 = MAP2) rr: drum part note number (00H-7FH) Size (H) 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 Data (H) 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-01 00-01 Parameter PLAY NOTE NUMBER LEVEL (= NRPN# 26) ASSIGN GROUP NUMBER PANPOT (= NRPN# 28, except RANDOM) REVERB SEND LEVEL (= NRPN# 29) CHORUS SEND LEVEL (= NRPN# 30) Rx. NOTE ON Description Pitch coarse TVA level Non, 1-127 -64 (RANDOM), -63 (LEFT) - +63 (RIGHT) 0. 0-1. 0 Multiplicand of the part reverb depth 0. 0-1. 0 Multiplicand of the part chorus depth OFF/ON OFF/ON Address (H) 41 m1 rr 41 m2 rr 41 m3 rr 41 m4 rr 41 m5 rr 41 m6 rr 41 m7 rr 41 m8 rr * When the Drum Set is changed, DRUM SETUP PARAMETER values will all be initialized. 11 Section 4. Supplementary material Decimal and Hexadecimal table In MIDI documentation, data values and addresses/sizes of exclusive messages etc. +------------+------------++------------+------------++------------+------------++------------+------------+ | Dec. | +------------+------------++------------+------------++------------+------------++------------+------------+ | 0 | 00H || 32 | 20H || 64 | 40H || 96 | 60H | | 1 | 01H || 33 | 21H || 65 | 41H || 97 | 61H | | 2 | 02H || 34 | 22H || 66 | 42H || 98 | 62H | | 3 | 03H || 35 | 23H || 67 | 43H || 99 | 63H | | 4 | 04H || 36 | 24H || 68 | 44H || 100 | 64H | | 5 | 05H || 37 | 25H || 69 | 45H || 101 | 65H | | 6 | 06H || 38 | 26H || 70 | 46H || 102 | 66H | | 7 | 07H || 39 | 27H || 71 | 47H || 103 | 67H | | 8 | 08H || 40 | 28H || 72 | 48H || 104 | 68H | | 9 | 09H || 41 | 29H || 73 | 49H || 105 | 69H | | 10 | 0AH || 42 | 2AH || 74 | 4AH || 106 | 6AH | | 11 | 0BH || 43 | 2BH || 75 | 4BH || 107 | 6BH | | 12 | 0CH || 44 | 2CH || 76 | 4CH || 108 | 6CH | | 13 | 0DH || 45 | 2DH || 77 | 4DH || 109 | 6DH | | 14 | 0EH || 46 | 2EH || 78 | 4EH || 110 | 6EH | | 15 | 0FH || 47 | 2FH || 79 | 4FH || 111 | 6FH | | 16 | 10H || 48 | 30H || 80 | 50H || 112 | 70H | | 17 | 11H || 49 | 31H || 81 | 51H || 113 | 71H | | 18 | 12H || 50 | 32H || 82 | 52H || 114 | 72H | | 19 | 13H || 51 | 33H || 83 | 53H || 115 | 73H | | 20 | 14H || 52 | 34H || 84 | 54H || 116 | 74H | | 21 | 15H || 53 | 35H || 85 | 55H || 117 | 75H | | 22 | 16H || 54 | 36H || 86 | 56H || 118 | 76H | | 23 | 17H || 55 | 37H || 87 | 57H || 119 | 77H | | 24 | 18H || 56 | 38H || 88 | 58H || 120 | 78H | | 25 | 19H || 57 | 39H || 89 | 59H || 121 | 79H | | 26 | 1AH || 58 | 3AH || 90 | 5AH || 122 | 7AH | | 27 | 1BH || 69 | 3BH || 91 | 5BH || 123 | 7BH | | 28 | 1CH || 60 | 3CH || 92 | 5CH || 124 | 7CH | | 29 | 1DH || 61 | 3DH || 93 | 5DH || 125 | 7DH | | 30 | 1EH || 62 | 3EH || 94 | 5EH || 126 | 7EH | | 31 | 1FH || 63 | 3FH || 95 | 5FH || 127 | 7FH | +------------+------------++------------+------------++------------+------------++------------+------------+ * * Decimal values such as MIDI channel, bank select, and program change are listed as one (1) greater than the values given in the above table. For data where greater precision is required, we must use two or more bytes. For example, two hexadecimal numbers aa bbH expressing two 7-bit bytes would indicate a value of aa x 128 + bb. [. . . ] +----------------+----------------+----------------------------+--------------------------------------+ |Hz in A4| cent | RPN #1 | Sys. Ex. 40 00 00 | +----------------+----------------+----------------------------+--------------------------------------+ | 445. 0 | +19. 56 | 4C 43 (+1603)| 00 04 0C 04 (+196)| | 444. 0 | +15. 67 | 4A 03 (+1283)| 00 04 09 0D (+157)| | 443. 0 | +11. 76 | 47 44 (+ 964)| 00 04 07 06 (+118)| | 442. 0 | + 7. 85 | 45 03 (+ 643)| 00 04 04 0F (+ 79)| | 441. 0 | + 3. 93 | 42 42 (+ 322)| 00 04 02 07 (+ 39)| | 440. 0 | 0. 00 | 40 00 ( 0)| 00 04 00 00 ( 0)| | 439. 0 | - 3. 94 | 3D 3D (- 323)| 00 03 0D 09 (- 39)| | 438. 0 | - 7. 89 | 3A 7A (- 646)| 00 03 0B 01 (- 79)| +----------------+----------------+----------------------------+--------------------------------------+ Arabian Scale By altering the setting for Scale Tune, you can obtain a variety of other tunings suited for ethnic music. For example, the settings introduced below will set the unit to use the Arabian Scale. Example Settings Note name Equal Temperament C 0 C# 0 D 0 D# 0 E 0 F 0 F# 0 G 0 G# 0 A 0 A# 0 B 0 Just Temperament (Keytone C) 0 -8 +4 +16 -14 -2 -10 +2 +14 -16 +14 -12 Arabian Scale -6 +45 -2 -12 -51 -8 +43 -4 +47 0 -10 -49 <Example> Set the tuning of MIDI channel 3 to A4 = 442. 0 Hz Send RPN#1 to MIDI channel 3. [. . . ]