User manual ROLAND RC-20XL MANUAL 2

[. . . ] Before using this unit, carefully read the sections entitled: "USING THE UNIT SAFELY" and "IMPORTANT NOTES" (separate sheet). These sections provide important information concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every feature provided by your new unit, Owner's manual should be read in its entirety. The manual should be saved and kept on hand as a convenient reference. * The "Mini Guide" on the back of the RC-20XL provides a simple explanation of use. [. . . ] · To cancel (undo) the most recently recorded overdub, hold down the left pedal for at least two seconds. * You cannot undo if the unit only has a slight amount of memory left (the OVERDUB indicator does not flash even if the left pedal is held down for two seconds or more). · To restore (redo) a cancelled overdub, hold down the left pedal again for at least two seconds. · To undo all overdubbed sounds (clear), hold down the right pedal for at least two seconds. * If the internal memory is used up, overdubbing may stop before you are finished. To stop playback and overdubbing, press the right pedal. <CAUTION> · Unauthorized recording, distribution, sale, lending, public performance, broadcasting, or the like, in whole or in part, of a work (musical composition, video, broadcast, public performance, or the like) whose copyright is held by a third party is prohibited by law. · Do not use this unit for purposes that could infringe on a copyright held by a third party. We assume no responsibility whatsoever with regard to any infringements of third-party copyrights arising through your use of this unit. · Use of the Sound Library for RC-20XL (Sample Phrase CD) supplied with this product for any purpose other than private, personal enjoyment without the permission of the copyright holder is prohibited by law. Additionally, this data must not be copied, nor used in a secondary copyrighted work without the permission of the copyright holder. 17 Playing/overdubbing along with a saved phrase fig. 06-02 1 3 3 (4) (8) 2 5, 6 (4), 7 1. Turn the PHRASE SELECT knob to select the phrase track in which the desired phrase is saved. The LOOP PHRASE or ONE SHOT PHRASE indicator flashes rapidly while the phrase is read from memory. 2. Press the MODE button to get the INST & MIC indicator to light. 18 Playing/overdubbing along with a saved phrase 3. If necessary, press the TAP TEMPO button several times to set the tempo. You can also set the tempo by pressing the right pedal instead of the TAP TEMPO button. * * For details on setting the tempo, refer to "Setting the tempo" (p. When you wish to overdub along with the phrase, press the left pedal. Each time you press the left pedal, you will switch between playback and overdubbing modes. · To cancel (undo) the most recently recorded overdub, hold down the left pedal for at least two seconds. * You cannot undo if the unit only has a slight amount of memory left (the OVERDUB indicator does not flash even if the left pedal is held down for two seconds or more). · To restore (redo) a cancelled overdub, hold down the left pedal again for at least two seconds. · To undo all overdubbed sounds (clear), hold down the right pedal for at least two seconds. * If the internal memory is used up, overdubbing may stop before you are finished. To save the data in the same phrase track, press the WRITE button once again. If you wish to save the data in a different phrase track, press the WRITE button (so its indicator is flashing), use the PHRASE SELECT knob to select the desired save destination, and then press the WRITE button once again. If you continue looping in Overdub mode, unwanted noise will also be recorded repeatedly. You should use Overdub mode only while recording a phrase. 19 Using the RC-20XL for practicing--Phrase Trainer When recording a song from CD or MD, you can erase vocals or guitar solos that locate at the center of the sound field. This function makes it easy to create "minus-one" data for practicing. [. . . ] (max. ) Maximum number of saved phrases: 11 phrases (max. ) Controls REC/PLAY/OVERDUB Pedal, STOP/TAP TEMPO Pedal, INST Knob, MIC Knob, PHRASE SELECT Knob, GUIDE Knob, LEVEL Knob, REVERSE Button, TAP TEMPO Button, WRITE Button, EXIT Button, AUTO START Button, MODE Button Indicators POWER (serves also as battery check indicator), REC, PLAY, OVERDUB, PEAK, LOOP QUANTIZE, LOOP PHRASE, ONE SHOT PHRASE, TAP TEMPO, REVERSE, WRITE, EXIT, AUTO START, INST & MIC, NORMAL, CENTER CANCEL, FLAT AMP SIMULATE Connectors INST Jack (1/4 inch phone type) MIC Jack (1/4 inch phone type) AUX IN Jack (Stereo miniature phone type) PHRASE SHIFT Jack (TRS 1/4 inch phone type) REVERSE Jack (1/4 inch phone type) OUTPUT Jack (1/4 inch phone type) AC Adaptor Jack Power DC 9V: Dry battery (R6/LR6 (AA) type) x 6 AC Adaptor (PSA-series) Power Consumption 120 mA (9 V max. ) * Expected battery life under continuous use: Carbon: 6 hours Alkaline: 16 hours These figures will vary depending on the actual conditions of use. Dimensions 173 (W) x 158 (D) x 57 (H) mm 6-13/16 (W) x 6-1/4 (D) x 2-1/4 (H) inches Weight 1. 2 kg / 2 lbs 11 oz (including batteries) Accessories Owner's Manual Leaflet ("USING THE UNIT SAFELY, " "IMPORTANT NOTES, " and "Information") Dry battery (AA type) x 6 Sound Library for RC-20XL (Sample Phrase CD) Options AC Adaptor (PSA-series) Foot Switch (FS-5U) * * 0 dBu = 0. 775 Vrms In the interest of product improvement, the specifications and/or appearance of this unit are subject to change without prior notice. 38 Index A AUTO START . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13, 16, 21 P Pedal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13, 17 Playing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]