User manual ROLAND JUNOD CONTROLING REVERB & CHORUS

[. . . ] Roland Information Sheet Juno ­D controlling Reverb and Chorus level via MIDI To control the Reverb and Chorus level on the Juno-D does require a minimum understanding of Continuous control number and the basic operating system of the Juno-D. [. . . ] The TIME will be the overall Reverb Room size while the LEVEL will be the parameter we can adjust using the control number. Using the <> cursors the same set of parameters will apply to Chorus, again LEVEL will be adjustable using controller 93. Any settings will be lost if not written to a Performance, so if you are to use this as a template then follow the instruction for writing a performance in the manual. To view the PARTS in your performance, press PART this will show the sound applied to PART 1 which will equate to MIDI transmit channel 1 on your sequencer. Using the 0--9 buttons will show you the first 10 parts and SHIFT+ 1--6 the last 6 parts. On newer sequencer packages for computer based systems there is usually a mixer which is designed for some very basic editing of real time controllers. [. . . ] Saving this in your sequence will store this setting, if the same performance is used then your song will set these correctly next time it is loaded. [. . . ]