User manual ROLAND FANTOM G8

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual ROLAND FANTOM G8. We hope that this ROLAND FANTOM G8 user guide will be useful to you.


ROLAND FANTOM G8 : Download the complete user guide (25484 Ko)

You may also download the following manuals related to this product:

   ROLAND FANTOM-G8 (21335 ko)
   ROLAND FANTOM-G8 (23345 ko)
   ROLAND FANTOM G8 (21335 ko)
   ROLAND FANTOM-G8 (24069 ko)
   ROLAND FANTOM G8 (22239 ko)
   ROLAND FANTOM G8 (22252 ko)
   ROLAND FANTOM-G8 annexe 8 (755 ko)
   ROLAND FANTOM-G8 annexe 7 (10511 ko)
   ROLAND FANTOM-G8 annexe 6 (1640 ko)
   ROLAND FANTOM-G8 annexe 5 (1922 ko)
   ROLAND FANTOM-G8 annexe 3 (1080 ko)
   ROLAND FANTOM-G8 annexe 4 (2972 ko)
   ROLAND FANTOM-G8 annexe 2 (299 ko)
   ROLAND FANTOM-G8 annexe 1 (233 ko)
   ROLAND FANTOM G8 PRISE EN MAIN (23345 ko)
   ROLAND FANTOM G8 SOUND LIST (1538 ko)
   ROLAND FANTOM G8 QUICK START GUIDE (10205 ko)
   ROLAND FANTOM G8 DRIVER INSTALLATION GUIDE (3162 ko)
   ROLAND FANTOM G8 ANNEXE 328 QUICK START GUIDE (10242 ko)
   ROLAND FANTOM G8 SOUND LIST-LIVE SET-STUDIO SET (266 ko)

Manual abstract: user guide ROLAND FANTOM G8

Detailed instructions for use are in the User's Guide.

[. . . ] WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION: RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS. IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS WARNING - When using electric products, basic precautions should always be followed, including the following: 1. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. [. . . ] Frequency of modulation Depth of modulation Adjusts the proportion of the flanger sound that is fed back into the effect. Adjusts the volume balance between the sound that is sent through the flanger (W) and the sound that is not sent through the flanger (D). Output Level 68: DISTORTION FLANGER The parameters are essentially the same as in "65: OVERDRIVE FLANGER, " with the exception of the following two. Overdrive Drive Distortion Drive, Overdrive Pan Distortion Pan fig. MFX-70 Balance D 0. 05­10. 00 Hz, note 0­127 -98­ +98 % L in Feedback L out Balance W Balance W Distortion Flanger Flanger Balance # D100:0W­D0:100W R in Balance D R out Level 0­127 69: DISTORTION DELAY The parameters are essentially the same as in "66: OVERDRIVE DELAY, " with the exception of the following two. Overdrive Drive Distortion Drive, Overdrive Pan Distortion Pan 66: OVERDRIVE DELAY fig. MFX-68 L in Balance D L out Balance W fig. MFX-71 L in Balance D L out Balance W Overdrive Delay Balance W Feedback Distortion Delay Balance W Feedback R in Balance D R out R in R out Balance D Parameter Overdrive Drive # Overdrive Pan # Delay Time Value 0­127 L64­63R 0­2600 ms, note Description Degree of distortion Also changes the volume. Stereo location of the overdrive sound Adjusts the delay time from the direct sound until the delay sound is heard. Adjusts the proportion of the delay sound that is fed back into the effect. Adjusts the frequency above which sound fed back to the effect will be cut. If you do not want to cut the high frequencies, set this parameter to BYPASS. Adjusts the volume balance between the sound that is sent through the delay (W) and the sound that is not sent through the delay (D). Delay Feedback # -98­ +98 % Delay HF Damp 200­8000 Hz, BYPASS Delay Balance # D100:0W­D0:100W 180 Effects List 70: ENHANCER CHORUS fig. MFX-72 Parameter Enhancer Mix # Delay Time Value 0­127 0­2600 ms, note Description Level of the overtones generated by the enhancer Adjusts the delay time from the direct sound until the delay sound is heard. Adjusts the proportion of the delay sound that is fed back into the effect. Adjusts the frequency above which sound fed back to the effect will be cut. If you do not want to cut the high frequencies, set this parameter to BYPASS. Adjusts the volume balance between the sound that is sent through the delay (W) and the sound that is not sent through the delay (D). Output Level Overview L in Enhancer Mix Balance D L out Balance W Chorus Balance W Delay Feedback # -98­ +98 % R in Enhancer Mix Balance D R out Delay HF Damp 200­8000 Hz, BYPASS Sound 1 Parameter Enhancer Sens # Enhancer Mix # Chorus Pre Delay Chorus Rate # Chorus Depth Chorus Balance # Value 0­127 0­127 0. 0­100. 0 ms Description Sensitivity of the enhancer Level of the overtones generated by the enhancer Adjusts the delay time from the direct sound until the chorus sound is heard. Frequency of modulation Depth of modulation Adjusts the volume balance between the sound that is sent through the chorus (W) and the sound that is not sent through the chorus (D). Output Level Delay Balance # D100:0W­D0:100W Sound 2 0. 05­10. 00 Hz, note 0­127 D100:0W­ D0:100W Level 0­127 73: CHORUS DELAY fig. MFX-75 Balance D Level 0­127 L in Balance D Balance W L out Sound 3 71: ENHANCER FLANGER fig. MFX-73 Balance W Chorus Balance W Delay Balance W Feedback Balance D R in L out Balance D Balance D Balance W R out L in Enhancer Mix Feedback Flanger Balance W Parameter Chorus Pre Delay Chorus Rate # Chorus Depth Chorus Balance # Delay Time Value 0. 0­100. 0 ms Description Adjusts the delay time from the direct sound until the chorus sound is heard. Frequency of modulation Depth of modulation Volume balance between the direct sound (D) and the chorus sound (W) Adjusts the delay time from the direct sound until the delay sound is heard. Adjusts the proportion of the delay sound that is fed back into the effect. Adjusts the frequency above which sound fed back to the effect will be cut. If you do not want to cut the high frequencies, set this parameter to BYPASS. Adjusts the volume balance between the sound that is sent through the delay (W) and the sound that is not sent through the delay (D). [. . . ] 30 UA - 89600 Mukachevo, UKRAINE TEL: (03131) 414-40 FINLAND Roland Scandinavia As, Filial Finland Elannontie 5 FIN-01510 Vantaa, FINLAND TEL: (0)9 68 24 020 U. A. E. Zak Electronics & Musical Instruments Co. TEL: (04) 3360715 NICARAGUA Bansbach Instrumentos Musicales Nicaragua Altamira D'Este Calle Principal de la Farmacia 5ta. Avenida 1 Cuadra al Lago. #503 Managua, Nicaragua TEL: (505)277-2557 BARBADOS A&B Music Supplies LTD 12 Webster Industrial Park Wildey, St. Michael, Barbados TEL: (246)430-1100 UNITED KINGDOM Roland (U. K. ) Ltd. Atlantic Close, Swansea Enterprise Park, SWANSEA SA7 9FJ, UNITED KINGDOM TEL: (01792) 702701 INDIA Rivera Digitec (India) Pvt. Edwin Moses Road, Mumbai-400011, INDIA TEL: (022) 2493 9051 GERMANY Roland Elektronische Musikinstrumente HmbH. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE ROLAND FANTOM G8




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ROLAND FANTOM G8 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.