Detailed instructions for use are in the User's Guide.
[. . . ] The manual should be saved and kept on hand as a convenient reference.
Before using the CY-14C/C, you need to make the settings for the percussion sound module (p. 2).
Contents of the Package
CY-14C/C (V-Cymbal unit) Connection Cable Cable Tie Wing Nut Felt Washer Stopper s Owner's Manual (this manual)
Names of the Components
Bell Portion BOW/EDGE Output Jack
Bow Portion Edge Portion BOW/BELL Output Jack
Features
· Similar touch and feel as with acoustic cymbals
The superior design has taken into account not only the shape of the cymbal, but also the bounce of the stick, and even the movement caused by playing. It can be used as a ride, crash, or splash cymbal.
· They're quiet!· Separate tones in bow and edge, or bow and bell; choking possible
When the CY-14C/C is used as a ride cymbal, you can play bell shots (p. [. . . ] Rough handling can lead to malfunctions.
556
· When connecting / disconnecting all cables, grasp the connector itself--never pull on the cable. This way you will avoid causing shorts, or damage to the cable's internal elements.
558d
· To avoid possible breakdown, do not use the unit in a wet area, such as an area exposed to rain or other moisture.
356
· Do not allow rubber, vinyl, or similar materials to remain on the unit for long periods of time. Such objects can discolor or otherwise harmfully affect the finish.
357
· This instrument is designed to minimize the extraneous sounds produced when it's played. However, since sound vibrations can be transmitted through floors and walls to a greater degree than expected, take care not to allow these sounds to become a nuisance to neighbors, especially when performing at night and when using headphones.
559a
· Do not put anything that contains water (e. g. , flower vases) on the unit. Also, avoid the use of insecticides, perfumes, alcohol, nail polish, spray cans, etc. , near the unit. Swiftly wipe away any liquid that spills on the unit using a dry, soft cloth.
· When you need to transport the unit, package it in the box (including padding) that it came in, if possible. Otherwise, you will need to use equivalent packaging materials.
562
Maintenance
401a
· Use a provided cable or a cable from Roland to make the connection. If using some other make of connection cable, please note the following precautions. Do not use cables that incorporate resistors for connecting to this unit. The use of such cables can cause the sound level to be extremely low, or impossible to hear. For information on cable specifications, contact the manufacturer of the cable.
· For everyday cleaning wipe the unit with a soft, dry cloth or one that has been slightly dampened with water. When a monaural cable is used, the sound does not change when an edge shot or a bell shot is made. Use stereo cable.
When using the TD-10 + TDW-1 with VCymbal Control
No sound is heard
· Is the trigger type set to "CTR"?Tones from inputs for which the trigger type is set to "CTR" do not sound (p. 6).
The sound does not vary when the striking position changes
· The CY-14C/C is capable of the positional detection feature. Positional detection is possible when plugged into the specified input on a Roland sound module with this feature. · For more on tones that can change according to the part of the cymbal struck, refer to the tone list in the Owner's Manual that came with your drum module. · With trigger types "RdB" and "CrB, " positional sensing is not possible. Use "RdA" or "CrA. "
The sound does not change when an edge shot is made
· Is the cable connected to the BOW/EDGE output?Make the connection to the BOW/EDGE output to enable the CY-14C/C to support edge shots (p. · Are you striking the cymbal in the area with the edge sensors?Edge sensors are embedded only in the part of the CY12R/C directly in front (p. [. . . ] Chahine Building, Achrafieh Beirut, LEBANON TEL: (01) 335799
URUGUAY
Todo Musica S. A.
Cuareim 1844, Montevideo, URUGUAY, CP11200 TEL: 5982-924-2335
VIETNAM
Saigon Music
138 Tran Quang Khai St. , District 1 Ho Chi Minh City VIETNAM TEL: (08) 844-4068
QATAR
Al Emadi Co. Box 62, DOHA QATAR TEL: 4423-554
VENEZUELA
Musicland Digital C. A.
Av. Francisco de Miranda, Centro Parque de Cristal, Nivel C2 Local 20 Caracas VENEZUELA TEL: (02) 285 9218
Paul Bothner (PTY) Ltd.
17 Werdmuller Centre Claremont 7700 Republic of SOUTH AFRICA P. O. Box 23032 Claremont, Cape Town SOUTH AFRICA, 7735 TEL: (021) 674 4030
ROMANIA
FBS LINES
Piata Libertatii 1, RO-4200 Gheorghehi TEL: (066) 164-609
AUSTRALIA/ NEW ZEALAND
AUSTRALIA
Roland Corporation Australia Pty. , Ltd.
38 Campbell Avenue Dee Why West. [. . . ]