User manual ROLAND CEB-3

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual ROLAND CEB-3. We hope that this ROLAND CEB-3 user guide will be useful to you.


ROLAND CEB-3 : Download the complete user guide (937 Ko)

You may also download the following manuals related to this product:

   ROLAND CEB-3 (312 ko)
   ROLAND CEB-3 MANUAL 2 (315 ko)

Manual abstract: user guide ROLAND CEB-3

Detailed instructions for use are in the User's Guide.

[. . . ] CHECK Indicator This indicator shows whether an effect is ON/OFF, and also doubles as the Battery Check indicator. The indicator lights when an effect is ON. * If this indicator goes dim or no longer lights while an effect is ON, the battery is near exhaustion and should be replaced immediately. For instructions on changing the batteries, refer to "Changing the Battery" (p. * The CHECK indicator shows whether the effect is being applied or not, and is used to indicate other effects. [. . . ] It does not indicate whether the power to the device is on or not. 3. OUTPUT A (MONO)/ OUTPUT B Jack The output jacks are used to connect the unit to an amplifier or another effects unit. * For monaural output, use Output jack A. * For stereo use: Output A: Only the processed signal (pitch modulated sound) is output. The CEB-3 adopts the "space synthesis system" for stereo output. That is, the depth of the effect varies depending on the distance between speakers. Note that lowering a filter control knob or effect level too much will shift the sound image to the Output B position, and therefore diminish the effect. Experiment with different as you play the instrument 5 Panel Description 4. INPUT Jack This jack accepts input signals (coming from a bass guitar, some other musical instrument, or another effects unit). * When running the unit on battery power, the INPUT jack double as power switches. Power to the unit is turned on when you plug into the INPUT jack; the power is turned off when the cable is unplugged. Be sure to disconnect any cord plugged into the INPUT jack when not using this effects device. 5. Replace the battery as soon as possible. 9 Operating the Unit fig. 05 1. When you have made the necessary connections, set the knobs as shown in the illustration. Adjust the speed of the chorus effect using the RATE Knob. 6 5 3 4 4. Using the LOW FILTER Knob, adjust the frequency band to which the chorus effect should be applied. LEVEL Knob. 10 Changing the Battery When the indicator goes dim or no longer lights while an effect is on, it means that the battery is nearly dead and must be replaced. Loosen the thumbscrew at the front of the pedal, then lift the pedal upwards to open the unit. * The thumbscrew can be left in the pedal while changing the battery. Remove the old battery from the battery housing, and remove the snap cord connected to it. Connect the snap cord to the new battery, and place the battery inside the battery housing. * Be sure to carefully observe the battery's polarity (+ versus ­). Slip the coil spring onto the spring base on the back of the pedal, then close the pedal. [. . . ] Slip the coil spring onto the spring base on the back of the pedal, then close the pedal. Finally, insert the thumbscrew into the guide bush hole and fasten it securely. Thumbscrew Pedal Spring Base Battery Snap Cord Coil Spring Guide Bush Hole Battery Snap Battery Housing 9V Battery 11 Setting Samples Clear Chorus fig. 10 Modern Chorus fig. 12 Slapping Play fig. 11 Vibrato fig. 13 12 Specifications CEB-3: Bass Chorus Nominal Input Level. . . . . . . . . . . . . . . . . . . -20 dBu Input Impedance. . . . . . . . . . . . . . . . . . . . . . . . . . 1 M Nominal Output Level. . . . . . . . . . . . . . . . -20 dBu Output Impedance . . . . . . . . . . . . . . . . . . . . . . 1 k Recommended Load Impedance . . . . 10 k or greater Residual Noise Level. . . . . . . . . . . . . . . . . . . -86 dBu (IHF-A, Typ. ) Controls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pedal Switch E. LEVEL (effect level) Knob LOW FILTER Knob RATE (modulation rate) Knob DEPTH (modulation depth) Knob Indicator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CHECK Indicator (serves also as battery check indicator) Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INPUT Jack OUTPUT A (MONO) Jack OUTPUT B Jack AC Adaptor Jack (DC 9 V) Power Supply. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DC 9 V: Dry Battery 9 V type (6F22/9 V) AC Adaptor 13 Specifications Current Draw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 mA (DC 9 V) * Expected battery life under continuous use: Carbon: 12 hours These figures will vary depending on the actual conditions of use. Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 (W) x 129 (D) x 59 (H) mm 2-7/8 (W) x 5-1/8 (D) x 2-3/8 (H) inches Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 450 g / 1 lb (including battery) Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Owner's Manual Leaflet ("USING THE UNIT SAFELY, " "IMPORTANT NOTES, " and "Information") Dry Battery 9 V type (6F22/9 V) Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC Adaptor PSA-Series * 0 dBu = 0. 775 Vrms * In the interest of product improvement, the specifications and/or appearance of this unit are subject to change without prior notice. 14 For EU Countries This product complies with the requirements of European Directive 89/336/EEC. For the USA FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE ROLAND CEB-3




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ROLAND CEB-3 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.