User manual ROLAND BR-1200CD

[. . . ] Drum name Note number Hi-Q D#1 (27) Stick G 1 (31) Metronome (click)A 1 (33) Metronome (bell) A#1 (34) Kick 2 B 1 (35) Kick 1 C 2 (36) Snare 1 D 2 (38) Snare 2 E 2 (40) Tom 1 F 2 (41) Closed hi-hat F#2 (42) Tom 2 A 2 (45) Open hi-hat A#2 (46) Tom 3 C3 (48) Crash cymbal C#3 (49) Tom 4 D 3 (50) Ride cymbal D#3 (51) Cow bell G#3 (56) Claves D#5 (75) Channel Mode Messages All Sound OFF (Controller number 120) Status 2nd byte 3rd byte BnH 78H 00H n = MIDI channel number: 0H - FH (ch. 16) n = MIDI channel number: * * n = MIDI channel number: mm, ll = Bank number: * Received via the MIDI channel set for the EXP PEDAL when the MIDI parameter ?MIDI Fader?Is set to PC+BANK, this is transmitted via the MIDI channel selected in the Effects Ch. [. . . ] For the correspondence between Bank Select/Program numbers and the insert effect patch banks/numbers, see ???. 16) 00H - 7FH (0 - 127) n = MIDI channel number: vv = Volume: * When the MIDI parameter ?MIDI Fader?is set to ON, this is transmitted via the MIDI channel set for a track when the corresponding track fader is moved. 16) 00H - 10H (0 - 16) n = MIDI channel number: vv = Expression: * n = MIDI channel number: mm = mono number: When the MIDI parameter ?MIDI Fader?is set to ON, this is transmitted via the MIDI channel set for the EXP PEDAL when the EXP PEDAL is operated. 128) n = MIDI channel number: n = MIDI channel number: pp = Program number: * * System Common Messages Quarter Frame Messages Status Second F1H mmH (= 0nnndddd) nnn = Message type: 0 = Frame count LS nibble 1 = Frame count MS nibble 2 = Seconds count LS nibble 3 = Seconds count MS nibble 4 = Minutes count LS nibble 5 = Minutes count MS nibble 6 = Hours count LS nibble 7 = Hours count MS nibble dddd = 4 bit nibble data: 0H - FH (0 - 15) * If the Sync parameter ?Sync Gen. will be transmitted when the BR-1200CD is running (recording or playing). * Transmitted according to the content of the SMF during playback of SMFs. Is set to PC ONLY or PC+BANK, this is transmitted via the MIDI channel selected in the Effects Channel setting when insert effects patches are switched. For the correspondence between Bank Select/Program numbers and the insert effect patch banks/numbers, see ???. 16) 00H - 7FH (0 - 127) n = MIDI channel number: vv = Channel Pressure: * Transmitted according to the content of the SMF during playback of SMFs. (0-29) xxyyyyyy Reserved (00) Seconds (0-59) xxyyyyyy Reserved (00) Minutes (0-59) Transmitted according to the content of the SMF during playback of SMFs. Channel Mode Messages * Transmitted according to the content of the SMF during playback of SMFs. 16) Hours Count xyyzzzzz x Reserved (0) yy Time Code Type * The time code types defined by the MIDI specification correspond to the BR-1200CD Sync parameter ?MTC Type? [. . . ] sub-Command Standard Time Specification with subframes EOX (End of Exclusive) If the efficient Maker of the locate switch is pressed or when moved, the BR-1200CD transmits this message. mIDI Time Code Command Full Message Basic operation of quarter frame messages will be handled. Status Data Byte Status F0H 7FH, Dev, 01H, 01H, hrH, mnH, scH, frH F7H Byte F0H 7FH Dev 01H 01H hrH yy Remarks Exclusive status Realtime Universal System Exclusive Header Device ID (7FH) sub-ID #1 (MIDI Time code) sub-ID #2 (Full message) hours and type: 0 yy zzzzz type: 00 = 24 Flame/sec 01 = 25 Flame/sec 10 = 30 Flame/sec (Drop Format) 11 = 30 Flame/sec (Non Drop Format) Hours (00 - 23) Minutes (00 - 59) Seconds (00 - 59) Frames (00 - 29) EOX (End of Exclusive) zzzzz: mnH scH frH F7H * This message is transmitted when the song position moves. [. . . ]