Detailed instructions for use are in the User's Guide.
[. . . ] The specific thing that must be done is indicated by the design contained within the circle. In the case of the symbol at left, it means that the powercord plug must be unplugged from the outlet.
001
005
· Before using this unit, make sure to read the instructions below, and the Owner's Manual. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
002a
· This unit should be used only with a stand (MDS series) that is recommended by Roland (p. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
006
· Do not open or perform any internal modifications on the unit. [. . . ] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
· This instrument is designed to minimize the extraneous sounds produced when it's played. However, since sound vibrations can be transmitted through floors and walls to a greater degree than expected, take care not to allow these sounds to become a nuisance to neighbors, especially when performing at night and when using headphones.
IMPORTANT NOTES
291a
In addition to the items listed under "USING THE UNIT SAFELY" on page 23, please read and observe the following:
Placement
354a
· Do not expose the unit to direct sunlight, place it near devices that radiate heat, leave it inside an enclosed vehicle, or otherwise subject it to temperature extremes. Excessive heat can deform or discolor the unit.
356
· Do not allow rubber, vinyl, or similar materials to remain on the unit for long periods of time. Such objects can discolor or otherwise harmfully affect the finish.
Maintenance
401a
· For everyday cleaning wipe the unit with a soft, dry cloth or one that has been slightly dampened with water. To remove stubborn dirt, use a cloth impregnated with a mild, non-abrasive detergent. Afterwards, be sure to wipe the unit thoroughly with a soft, dry cloth.
402
· Never use benzine, thinners, alcohol or solvents of any kind, to avoid the possibility of discoloration and/or deformation.
Additional Precautions
553
· Use a reasonable amount of care when using the unit's buttons, sliders, or other controls; and when using its jacks and connectors. Tighten the felt washer and the wing nut.
Making the Settings
Wing Nut
Using the AXIS-1 as a cymbal pad
When mounting the AXIS-1 on a cymbal stand, use ONLY the attachment set as shown below.
fig. CY-03. j
Felt Washer
Wing Nut tension The wing nut should be tightened to allow the movement you desire. Standard, metal wing nuts found on most cymbal stands should never be used.
Wing Nut
Felt Washer
4. Use the included connection cable and connect the output jack of the AXIS-1 to the trigger input jack of the percussion sound module.
Stopper Connect the L-shaped plug of the included cable to the AXIS-1.
To make use of edge shot and choking play techniques, you'll need to connect to a trigger input jack on the percussion sound module that accommodates rim shots (p. 6).
921
* To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power on all devices before making any connections.
5. Mount the cymbal stopper as shown below.
The cymbal stopper keeps the cymbal from rotating, allowing proper function of the pad, and also prevents cables from winding around the stand. Box 922846 Amman 11192 JORDAN TEL: (06) 5692696
SINGAPORE
SWEE LEE MUSIC COMPANY PTE. 150 Sims Drive, SINGAPORE 387381 TEL: 6846-3676
CURACAO
Zeelandia Music Center Inc. Box 62, Doha, QATAR TEL: 4423-554
ASIA
CHINA
Roland Shanghai Electronics Co. , Ltd. No. 1500 Pingliang Road Shanghai 200090, CHINA TEL: (021) 5580-0800 Roland Shanghai Electronics Co. , Ltd. No. 18 3 Section Anhuaxili Chaoyang District Beijing 100011 CHINA TEL: (010) 6426-5050 Roland Shanghai Electronics Co. , Ltd. (GUANGZHOU OFFICE) 2/F. , No. 30 Si You Nan Er Jie Yi Xiang, Wu Yang Xin Cheng, Guangzhou 510600, CHINA TEL: (020) 8736-0428
SPAIN
Roland Iberia, S. L. Paseo García Faria, 33-35 08005 Barcelona SPAIN TEL: 93 493 91 00
GUATEMALA
Casa Instrumental Calzada Roosevelt 34-01, zona 11 Ciudad de Guatemala Guatemala TEL:(502) 599-2888
BELGIUM/FRANCE/ HOLLAND/ LUXEMBOURG
Roland Central Europe N. V. Houtstraat 3, B-2260, Oevel (Westerlo) BELGIUM TEL: (014) 575811
SAUDI ARABIA
aDawliah Universal Electronics APL Corniche Road, Aldossary Bldg. , 1st Floor, Alkhobar, SAUDI ARABIA P. O. Box 2154, Alkhobar 31952 SAUDI ARABIA TEL: (03) 898 2081
AUSTRALIA/ NEW ZEALAND
AUSTRALIA/ NEW ZEALAND Roland Corporation Australia Pty. , Ltd.
38 Campbell Avenue Dee Why West. NSW 2099 AUSTRALIA For Australia Tel: (02) 9982 8266 For New Zealand Tel: (09) 3098 715
SWEDEN
Roland Scandinavia A/S SWEDISH SALES OFFICE Danvik Center 28, 2 tr. S-131 30 Nacka SWEDEN TEL: (0)8 702 00 20
HONDURAS
Almacen Pajaro Azul S. A. BO. Paz Barahona 3 Ave. 11 Calle S. O San Pedro Sula, Honduras TEL: (504) 553-2029
CZECH REP.
K-AUDIO Kardasovska 626. [. . . ] (Toronto Office) 170 Admiral Boulevard Mississauga On L5T 2N6 CANADA TEL: (905) 362 9707
INDIA
Rivera Digitec (India) Pvt. Edwin Moses Road, Mumbai-400011, INDIA TEL: (022) 2493 9051
BRAZIL
Roland Brasil Ltda. Rua San Jose, 780 Sala B Parque Industrial San Jose Cotia - Sao Paulo - SP, BRAZIL TEL: (011) 4615 5666
PANAMA
SUPRO MUNDIAL, S. A. Warehouse Area `DEPO' Pf. 83 H-2046 Torokbalint, HUNGARY TEL: (23) 511011
INDONESIA
PT Citra IntiRama J1. [. . . ]