User manual ROLAND AX-SYNTH

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual ROLAND AX-SYNTH. We hope that this ROLAND AX-SYNTH user guide will be useful to you.


ROLAND AX-SYNTH : Download the complete user guide (4930 Ko)

You may also download the following manuals related to this product:

   ROLAND AX-SYNTH (561 ko)
   ROLAND AX-SYNTH (3814 ko)
   ROLAND AX-SYNTH (4961 ko)
   ROLAND AX-SYNTH (2840 ko)
   ROLAND AX-SYNTH annexe 1 (2215 ko)
   ROLAND AX-SYNTH ERRATUM (89 ko)

Manual abstract: user guide ROLAND AX-SYNTH

Detailed instructions for use are in the User's Guide.

[. . . ] r® Owner's Manual For EU Countries This product complies with the requirements of European Directive EMC 2004/108/EC. For the USA FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. [. . . ] These sounds are based on a different technology than SuperNATURAL Tones. (1) Connect the AX-Synth to your amplifier (page 14) and switch it on (page 17). (2) Press the [SuperNATURAL÷SPECIAL¥TONE] button. ENGLISH (3) Press one of the last four TONE buttons to select the corresponding SPECIAL Tone. Note: Switch off the [SuperNATURAL÷SPECIAL¥TONE] button if you want to select a "regular" Tone again. ENGLISH 19 Playing the AX-Synth Recalling FAVORITE memories To select the Tones assigned to the FAVORITE memories, proceed as follows. (1) Press the FAVORITE [A] or [B] button to select the bank. The FAVORITE button you press lights and the display shows "A -" (bank "A") or "b -" (bank "B"). (2) Press one of the eight TONE buttons to select the desired FAVORITE memory in the currently selected bank. You can also use the VARIATION [DEC÷­]/[INC÷+] buttons to select the FAVORITE memories sequentially, which may be handy for live performances. This procedure does not allow you to change banks (from "A" to "B" and vice versa), however. Note: When the "Uar" function is selected (see p. 18), you can also use the OCTAVE/VARIATION [+]/[­] buttons to select FAVORITE memories. Note: To select a "regular" Tone again, press the [A] or [B] button that lights to switch it off. 20 r AX-Synth Owner's Manual ENGLISH 5. Using the AX-Synth's performance functions The AX-Synth provides several functions that allow you to add expression to your music, change the pitch/key, etc. Master Tune This parameter allows you to change the AX-Synth's overall tuning. The factory default, 440Hz, represents the reference pitch used by most electronic musical instruments. (1) Hold down the [SHIFT] button and press the [TRANPOSE] button. Transpose Your AX-Synth comes with a TRANSPOSE function you may want to use for playing songs in other keys than the ones you are used to. (1) Hold down the [TRANSPOSE] button and wait until the current transposition interval flashes in the display. ENGLISH The current tuning value flashes in the display and the [WRITE] button flashes. (2) Keep holding the [SHIFT] button and set the desired tuning value with the VARIATION [DEC÷­]/[INC÷+] buttons. (2) Keep holding the [TRANSPOSE] button and press OCTAVE/VARIATION [+] or [­] to set the desired value. ENGLISH Press [INC÷+] to increase the value, or [DEC÷­] to select a lower one. You may have to press the selected button several times to select the desired value. The display only shows the last three digits (the initial "4" is therefore omitted). To scroll through the available values, you can hold down either VARIATION [INC÷+] or [DEC÷­]. To scroll even faster, press and hold the "other" VARIATION button. You can play on the keyboard to check whether you have selected the correct interval. Feel free to change it again before confirming you setting (see below). (3) Press the [WRITE] button to confirm your setting. The setting range is "­5" (five semi-tones down) to "6" (six semi-tones up). If you selected a transposition interval other than "0", the [TRANPOSE] button lights. [. . . ] TEL: (2) 830 20270 SWEDEN Roland Scandinavia A/S SWEDISH SALES OFFICE Danvik Center 28, 2 tr. S-131 30 Nacka SWEDEN TEL: (0)8 702 00 20 SYRIA Technical Light & Sound Center PO BOX 13520 BLDG No. 17 ABDUL WAHAB KANAWATI. ST RAWDA DAMASCUS, SYRIA TEL: (011) 223-5384 HONG KONG Tom Lee Music Co. , Ltd. Service Division 22-32 Pun Shan Street, Tsuen Wan, New Territories, HONG KONG TEL: 2415 0911 Parsons Music Ltd. 8th Floor, Railway Plaza, 39 Chatham Road South, T. S. T, Kowloon, HONG KONG TEL: 2333 1863 CENTRAL/LATIN AMERICA ARGENTINA Instrumentos Musicales S. A. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE ROLAND AX-SYNTH




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ROLAND AX-SYNTH will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.