User manual PYRAMID PW1286-X DATASHEET

[. . . ] Pull the strap tight so that it does not come loose. EN 3 Monitor Shooting mode display 1 2 10 3 1 2 3 44 25 24 23 0. 0 WB AUTO ISO AUTO 14M 4 NORM DATE z 00:34 22 21 20 19 18 17 1615 14 13 1/100 F3. 2 28 27 26 Shooting mode . . . . . . . p. 19 Flash standby/flash charge 5 6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p. 30 9 7 Exposure compensation 10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p. 39, 64 14 Continuous recording length (movies) . . . . . . . . . . . . . . . . . . . . . . p. [. . . ] When you select a time zone, the camera automatically calculates the time difference between the selected zone and the home time zone (x) to display the time in the travel destination time zone (z). 50 EN Printing Direct printing (PictBridge*1) By connecting the camera to a PictBridge-compatible printer, you can print images directly without using a computer. To find out if your printer supports PictBridge, refer to the printer's instruction manual. *1 PictBridge is a standard for connecting digital cameras and printers of different makers and printing out pictures directly. The printing modes, paper sizes, and other parameters that can be set with the camera vary depending on the printer that is used. For details on the available paper types, loading paper, and installing ink cassettes, refer to the printer's instruction manual. I (right) 2 Turn on the printer, and then connect the printer and camera. Multiconnector Open the connector cover in the direction of the arrow. USB cable (supplied) Printing images at the printer's standard settings [Easy Print] In the setup menu, set [USB Connection] to [Print]. 45) 1 Display the image to be printed on the monitor. "Viewing images" (p. To print another image, use HI to select an image, and press the A button. To exit printing After a selected image is displayed on the screen, disconnect the USB cable from the camera and printer. EN 51 Changing the printer's settings for printing [Custom Print] 5 Use FG to select the [Borderless] or [Pics/ Sheet] settings, and press the A button. Submenu 4 Application The image is printed with a border around it ([Off]). The number of images per sheet ([Pics/Sheet]) is selectable only when [Multi Print] is selected in Step 3. 1 2 3 Follow Steps 1 and 2 for [Easy Print] (p. Use FG to select the print mode, and press the A button. Submenu 2 Application This prints the image selected in Step 6. This prints an index of all images stored in the internal memory or card. This prints images based on the print reservation data on the card. Off/On*1 (The number of images per sheet varies depending on the printer. ) *1 Print All Print Multi Print All Index Print Order*1 *1 The available settings for [Borderless] vary depending on the printer. If necessary, repeat Step 4, and then press the A button when finished. Use FG to select the [X] (date print) screen option, and press the A button. The settings are applied to the remaining images with the print reservation data. Use FG to select [Set], and press the A button. EN 55 Usage Tips If the camera does not work as intended, or if an error message is displayed on the screen, and you are unsure of what to do, refer to the information below to fix the problem(s). With prolonged camera use, the internal temperature may increase, resulting in automatic shutdown. If this occurs, remove the battery from the camera and wait until the camera has sufficiently cooled. The camera's external temperature may also increase during use, however this is normal and does not indicate malfunction. Troubleshooting Battery "The camera does not work even when batteries are installed". 11), "Charging the battery with the included USB-AC adapter" (p. 12) Battery performance may have been reduced temporarily due to low temperature. Take the batteries out of the camera, and warm them by putting them in your pocket for a while. Monitor "Difficult to see". Turn off the power, and wait for the camera body to become acclimated to the surrounding temperature and dry out before taking pictures. Shooting with flash in dark situations results in an image with many flash reflections on dust in the air. Date and time function "Date and time settings return to the default setting". If the batteries are removed and left out of the camera for about 3 days*1, the date and time settings return to the default setting, and must be reset. [. . . ] 2 The customer shall transport the product to the dealer or Olympus authorized service station at his own risk and shall be responsible for any costs incurred in transporting the product. 3 This warranty does not cover the following and the customer will be required to pay repair charge, even for defects occurring within the one year period referred to above. Any defect that occurs due to mishandling (such as an operation performed that is not mentioned in the Handling Care or other sections of the instructions, etc. ) b. performed by anyone other than Olympus or an Olympus authorized service station. [. . . ]