User manual PYRAMID PW1086-X DATASHEET

[. . . ] Pull the strap tight so that it does not come loose. EN 3 Monitor Shooting mode display 1 25 24 23 22 21 20 19 2 P 0. 0 WB AUTO ISO AUTO 00:34 4 16M NORM DATE 3 4 5 6 7 8 9 1 Battery check. . . . . . . . . . p. 35 15 Shadow Adjustment 16 Compression (still images) 17 Image size (still images) 18 Number of storable still Technology. . . . . . . . . . . . . . . . . . p. 34, 61 18 17 16 15 14 13 12 11 10 1/100 F3. 1 27 26 pictures (still images) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p. 17 4 EN Playback mode display Standard display 1 2 3 45 6 3D 10 78 4/30 1 1 Battery check. . . . . . . . . . p. [. . . ] 43) 1 Display the image to be printed on the monitor. "Viewing images" (p. 20) Easy Print Start Custom Print OK 3 4 Press I to start printing. To print another image, use HI to select an image, and press the A button. To exit printing After a selected image is displayed on the screen, disconnect the USB cable from the camera and printer. EN 49 Changing the printer's settings for printing [Custom Print] 5 Use FG to select the [Borderless] or [Pics/ Sheet] settings, and press the A button. Submenu 4 Application The image is printed with a border around it ([Off]). The number of images per sheet ([Pics/Sheet]) is selectable only when [Multi Print] is selected in Step 3. 1 2 3 Follow Steps 1 and 2 for [Easy Print] (p. Use FG to select the print mode, and press the A button. Submenu 2 Application This prints the image selected in Step 6. This prints an index of all images stored in the internal memory or card. This prints images based on the print reservation data on the card. Off/On*1 (The number of images per sheet varies depending on the printer. ) *1 Print All Print Multi Print All Index Print Order*1 *1 The available settings for [Borderless] vary depending on the printer. If [Standard] is selected in Steps 4 and 5, the image is printed at the printer's standard settings. 6 7 Use HI to select an image. Press G to make the detailed printer settings for the current image. [Print Order] is available only when print reservations have been made. 52) 4 Use FG to select [Size] (Submenu 3), and press I. If the [Printpaper] screen is not displayed, the [Size], [Borderless], and [Pics/Sheet] are set to the printer's standard. Printpaper Size Standard Borderless Standard Back MENU Set OK 50 EN To make the detailed printer settings 1 Use FGHI to select the setting, and press the A button. Submenu 5 Submenu 6 <X Date 0 to 10 Application This selects the number of prints. 9 Press the A button. Print Selecting [With] prints the images with the date. The camera's external temperature may also increase during use, however this is normal and does not indicate malfunction. Troubleshooting Battery "The camera does not work even when batteries are installed". 11) Battery performance may have been reduced temporarily due to low temperature. Take the batteries out of the camera, and warm them by putting them in your pocket for a while. Monitor "Difficult to see". Turn off the power, and wait for the camera body to become acclimated to the surrounding temperature and dry out before taking pictures. Vertical lines may be visible in the monitor when the camera is pointed at very bright subjects under clear skies or similar conditions, but they will not appear in the final image unless [d] is selected. Shooting with flash in dark situations results in an image with many flash reflections on dust in the air. Card/Internal memory "An error message is displayed". 55) Shutter button "No picture is taken when the shutter button is pressed". To save battery power, the camera automatically goes into sleep mode and the monitor turns off if there is no operation for 3 minutes when the camera is turned on. No picture is taken even if the shutter button is fully pressed in this mode. Operate the zoom lever or other buttons to restore the camera from sleep mode before taking a picture. If the camera is left for another 12 minutes, it automatically turns off. [. . . ] 3 This warranty does not cover the following and the customer will be required to pay repair charge, even for defects occurring within the one year period referred to above. Any defect that occurs due to mishandling (such as an operation performed that is not mentioned in the Handling Care or other sections of the instructions, etc. ) b. performed by anyone other than Olympus or an Olympus authorized service station. Any defect or damage that occurs due to transport, a fall, shock, etc. [. . . ]