User manual PYRAMID PMBH215 DATASHEET

[. . . ] 19) Step How to Use the Camera Step Printing "Camera Settings" (p. 57) Contents Names of Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Menus for Playback, Editing, and Printing Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 2 EN Camera Settings Using the Direct Buttons Frequently used functions can be accessed using the direct buttons. Shutter button (p. [. . . ] 48) 1 Display the image to be printed on the monitor. "Viewing images" (p. 22) Easy Print Start Custom Print OK 3 4 Press I to start printing. To print another image, use HI to select an image, and press the A button. 54 EN To exit printing After a selected image is displayed on the screen, disconnect the USB cable from the camera and printer. 4 Use FG to select [Size] (Submenu 3), and press I. If the [Printpaper] screen is not displayed, the [Size], [Borderless], and [Pics/Sheet] are set to the printer's standard. Printpaper Changing the printer's settings for printing [Custom Print] 1 2 3 Follow Steps 1 and 2 for [Easy Print] (p. Use FG to select the print mode, and press the A button. Submenu 2 Application This prints the image selected in Step 6. This prints an index of all images stored in the internal memory or card. *1 Size Standard Borderless Standard Back MENU Set OK Print All Print Multi Print All Index Print Order *1 5 Use FG to select the [Borderless] or [Pics/ Sheet] settings, and press the A button. Submenu 4 Application The image is printed with a border around it ([Off]). The number of images per sheet ([Pics/Sheet]) is selectable only when [Multi Print] is selected in Step 3. Off/On*1 (The number of images per sheet varies depending on the printer. ) *1 This prints images based on the print reservation data on the card. [Print Order] is available only when print reservations have been made. 57) The available settings for [Borderless] vary depending on the printer. If [Standard] is selected in Steps 4 and 5, the image is printed at the printer's standard settings. 6 7 Use HI to select an image. Press G to make the detailed printer settings for the current image. EN 55 To make the detailed printer settings 1 Use FGHI to select the setting, and press the A button. Submenu 5 Submenu 6 <× 0 to 10 Application This selects the number of prints. Selecting [Without] prints the images without the date. 9 Press the A button. Print Print Cancel Date With/Without Back MENU Set OK File Name Selecting [With] prints the file name on the image. 13), "Charging the battery with the included USB-AC adapter" (p. 16) Battery performance may have been reduced temporarily due to low temperature. Take the batteries out of the camera, and warm them by putting them in your pocket for a while. may increase, resulting in automatic shutdown. If this occurs, remove the battery from the camera and wait until the camera has sufficiently cooled. The camera's external temperature may also increase during use, however this is normal and does not indicate malfunction. Monitor "Difficult to see". Turn off the power, and wait for the camera body to become acclimated to the surrounding temperature and dry out before taking pictures. *1 Dew drops can form in the camera when it is suddenly taken from a cold location into a warm, humid room. This condition may occur when the camera is pointed at an extremely bright subject under a clear sky and so on. Shooting with flash results in an image with many flash reflections on dust in the air. Card/Internal memory "An error message is displayed". 60) Shutter button "No picture is taken when the shutter button is pressed". To save battery power, the camera automatically goes into sleep mode and the monitor turns off if there is no operation for 3 minutes when the camera is turned on. [. . . ] performed by anyone other than Olympus or an Olympus authorized service station. Any defect or damage that occurs due to transport, a fall, shock, etc. Any defect or damage that occurs due to fire, earthquake, flood damage, thunderbolt, other natural disasters, environmental pollution and irregular voltage sources. Any defect that occurs due to careless or improper storage (such as keeping the product under conditions of high temperature and humidity, near insect repellents such as naphthalene or harmful drugs, etc. ), improper maintenance, etc. [. . . ]