User manual PYRAMID PEQ60
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual PYRAMID PEQ60. We hope that this PYRAMID PEQ60 user guide will be useful to you.
 |
Manual abstract: user guide PYRAMID PEQ60
Detailed instructions for use are in the User's Guide.
[. . . ] FM antenna connection Use the FM 300 terminals when connecting the T-shaped FM feeder antenna supplied or a 300 lead-in cable from an outdoor antenna. Use the FM 75 terminals when connecting a 75 coaxial cable from an outdoor antenna. AM loop antenna connection Connect the cord of the accessory AM loop antenna to the AM LOOP antenna terminals, and attach it to the accessory antenna holder. [. . . ] Attach antenna holder to a wall with the range of the loop antenna cord. When tuning into AM (MW, LW) stations, move the antenna to the left or right and set it in the direction which yields the optimum reception. * AM (MW, LW) reception is not possible with the loop antenna detached. Even if n outdoor AM antenna is erected, keep this loop antenna in place. * Do not bring the power cord or the speaker cords near the loop antenna since noise will be generated. * Do not bring the loop antenna near to the display, otherwise will affect the reception.
PANEL INFORMATION
1
AMI
POWER
2
3
TUNING
UP
ON/STANDBY
DOWN
PRESET STATIONS
1
2
3
4
5
6
7
8
9
10/10+
MEMORY
AUTO
BAND
STEREO/MO.
8
7
6
5
4
1. ON/STANDBY SWITCH Press this button to switch "ON" the unit and press again to switch "OFF" unit into "STANDBY MODE". When the switches are kept in the depressed position, the received frequency moves up and down rapidly in the units you release the switches. * With manual tuning, the frequency will not stop changing as long as the UP or DOWN switch is held pressed. FM STEREO/MONO SWITCH This switch has a dual function: It switches the stereo and mono reception. FM stereo broadcasts can be heard in stereo while FM mono broadcast are heard in mono. Normally, the stereo is received when press the stereo/mono knob once. And the mono when the switch is pressed once again, the relative light will be shown on the display. When received stereo signal is too weak, then there will be some noise, you can press the mono key to cut the noise. [. . . ] And the mono when the switch is pressed once again, the relative light will be shown on the display. When received stereo signal is too weak, then there will be some noise, you can press the mono key to cut the noise. AM / FM SELECTOR SWITCH Press this switch to select the broadcast band (AM or FM). [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE PYRAMID PEQ60
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual PYRAMID PEQ60 will begin.