User manual PYRAMID CR79G

[. . . ] COLOR DIGITAL FLUORESCENT DISPLAY The frequency of the station which has been in is indicated in digits. MHz units are used for FM frequencies and KHz units for AM frequencies. When the MEMORY SCAN switch or the PRESET STATION switch is pressed, the current station number will be displayed. [. . . ] When the MEMORY SCAN switch or the PRESET STATION switch is pressed, the current station number will be displayed. TUNING SWITCH (UP or DOWN) Press UP or DOWN to search your favorite station. Tuning can be performed either automatically or manually, depending on the setting of the tuning mode selector switch. Auto tuning: When the DOWN TUNING switch is depressed, the frequency which is tuned in is counted down and this countdown operation stops automatically as soon as the station is tuned in the LOCK indicator together with the relative frequencies will be continuously counted down without stopping when stations are tuned in until you release the switch. This will stop the automatic tuning operation when the lower frequency limit is reached, count-down changes over to count-up. Manual tuning: Every time one of the TUNING switches is depressed, the received frequency moves up or down in 50Khz units for FM and 9 KHz for AM. When the switches are kept in the depressed position, the received frequency moves up and down rapidly in the units you release the switches. * With manual tuning, the frequency will not stop changing as long as the UP or DOWN switch is held pressed. FM antenna Indoor T-shaped FM antenna The T-shaped antenna included with the unit is meant for temporary use until an outdoor FM antenna is set up. Connect it to the FM 300 Antenna terminals and open the arm ends to form a "T" shape. While listening to a broadcast, hold the stretched ends and move around until it is facing in the direction in which the signals come in strongest, then attach to wall or ceiling. FM antenna connection Use the FM 300-ohms terminals when connecting the T-shaped FM feeder antenna supplied or a 300-ohms lead-in cable from an outdoor antenna. Use the FM 75-ohms terminals when connecting a 75-ohms coaxial cable from an outdoor antenna. AM loop antenna connection Connect the cord of the accessory AM loop antenna to the AM LOOP antenna terminals, and attach it to the accessory antenna holder. Attach antenna holder to a wall with the range of the loop antenna cord. When tuning into AM (MW, LW) stations, move the antenna to the left or right and set it in the direction which yields the optimum reception. [. . . ] Attach antenna holder to a wall with the range of the loop antenna cord. When tuning into AM (MW, LW) stations, move the antenna to the left or right and set it in the direction which yields the optimum reception. * AM (MW, LW) reception is not possible with the loop antenna detached. [. . . ]