User manual PHILIPS SWV4152S
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual PHILIPS SWV4152S. We hope that this PHILIPS SWV4152S user guide will be useful to you.
Manual abstract: user guide PHILIPS SWV4152S
Detailed instructions for use are in the User's Guide.
[. . . ] Typically used with red/white audio cables.
A
A Connect the video
cable (yellow) from the video output on camera (or other device) to the video input (yellow) located on the side of TV.
Use this guide to achieve the optimal connection for each of your components. [. . . ] Used with red/white audio cables.
B Connect audio cables
(red/white) from audio outputs on device to audio inputs (red/white) TV on the side of TV.
Note: for mono devices, connect only white audio cable from device's audio output to white audio input on the side of TV. Video Camera
Connection Basics
Basic
Composite Audio/Video RF
Separate video (yellow) and audio (red/white) cables that provide a basic connection from the cable box and other devices. Provides both audio and video.
B
HDMI
Basic
VIDEO
C Turn on TV and the D Press PLAY on the device to verify device. CH- on the remote control until FRONT/ SIDE appears on TV screen.
Other Possible Connections
S-Video
Refer to panel 3.
AUDIO LEFT RIGHT
S-VIDEO
Video Camera Jack Panel
High-Definition Multimedia Interface provides an uncompressed, all-digital audio/video connection. Press CH+ or CH- on remote control to tune to the video supplied by HDMI.
A B
Remote Control HDMI Input
A Connect S-Video
cable to S-Video input on back of TV and S-Video output on back of VCR. Press CH+ or CH- on remote control until AV1 or AV2 appears on TV screen.
B Connect audio cables
(red/white) to audio AV inputs on back of TV and Audio outputs on back of VCR. videotape into VCR and press PLAY to verify correct connection.
B
Back of VCR
A
recorded DVD into DVD player/ DVD recorder and press PLAY to verify correct connection.
Back of DVD Player/Recorder
COMP VIDEO Y Pb OUT Pr OUT OUT L S-VIDEO VIDEO AUDIO R
C Turn on TV and VCR. D Insert pre-recorded
L R AUDIO OUT
VIDEO OUT
S-VIDEO OUT
ANT/CABLE OUT
CH+ and CH- Buttons
C
Remote Control
CH+ and CH- Buttons
OR
TV Jack Panel
AV1 in AV2 in
Note: When you connect S-Video and AV2 at the same time, you can only hear sound coming from S-Video .
CH+ and CH- Buttons
OR
TV Jack Panel
S-VIDEO AV1 in VIDEO L/Mono Y AV2 in
Component Video Input
TV
VIDEO L/Mono Y
AUDIO
Pb
R
Pr COMPONENT VIDEO INPUT
Composite Audio/Video
AUDIO
Pb S-VIDEO
A Video connectors into
their corresponding jacks on both DVD player/DVD recorder and TV (sometimes labeled Y, Pb and Pr).
Insert Component
B audio cables into the
Connect red/white
A
COMP VIDEO Y Pb OUT Pr OUT OUT S-VIDEO VIDEO AUDIO
B
A Connect the video
R L
R
Pr COMPONENT VIDEO INPUT
TV
audio output jacks on DVD player/DVD recorder and audio AV inputs on TV. [. . . ] Insert a pre-recorded DVD recorder and press PLAY to verify correct connection.
Back of DVD Player/Recorder
C player/DVD recorder.
Press CH+ or CHon remote control until CVI appears on TV screen.
Turn on TV and DVD
D DVD into DVD player/
cable (yellow) to the VIDEO AV input on back of TV and the corresponding video output on back of VCR. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE PHILIPS SWV4152S
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual PHILIPS SWV4152S will begin.