User manual PHILIPS MCM2150
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual PHILIPS MCM2150. We hope that this PHILIPS MCM2150 user guide will be useful to you.
Manual abstract: user guide PHILIPS MCM2150
Detailed instructions for use are in the User's Guide.
[. . . ] Battery usage CAUTION – To prevent battery leakage which may result in bodily injury, property damage, or damage to the unit: • Install all batteries correctly, + and - as marked on the unit. • Batteries (packed or installed) shall not be exposed to excessive heat such as sunshine, fire or the like. liquid filled objects, lighted candles).
2
EN
•
Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
Warning
•• Never remove the casing of this device. [. . . ] If you contact Philips, you will be asked for the model and serial number of this apparatus. ___________________________
FM SPEAKER OUT (8 ) ANTENNA
Connect speakers
Note •• For optimal sound, use the supplied speakers only. •• Connect only speakers with impedance that is the
100-240 V~50/60 Hz AC MAINS~
same or higher than the supplied speakers. Refer to the Specifications section of this manual.
Demonstrate the features
In the standby mode, you can demonstrate features by pressing . »» The features are displayed one by one across the display panel.
SPEAKER OUT (8 )
FM
SPEAKER OUT (8 )
ANTENNA
100-240 V~50/60 Hz AC MAINS~
• To turn off the demonstration, press again.
Prepare the remote control
Caution •• Risk of explosion!When the remote control is
not used for long periods, remove the batteries. Never discard batteries in fire.
EN
7
To insert the remote control battery:
1 2 3
Open the battery compartment. Insert the supplied AAA battery with correct polarity (+/-) as indicated. »» The unit switches to the last selected source.
Switch to standby mode
Press again to switch the unit to standby mode. »» The display panel is dimmed.
Note •• The unit switches to Eco Power Standby mode after 15
minutes in standby mode.
Set clock 1
In standby mode, press and hold CLOCK on the remote control for more than two seconds. Repeat step 3to set minute.
Note •• If no button is pressed in 90 seconds, the system exits
clock setting mode automatically.
2 3 4
Switch between standby mode and ECO standby mode: Press and hold for more than two seconds.
Tip •• You can view clock information in power on mode by
pressing CLOCK.
8
EN
4 Play
CD
AUDIO IN
FM
PRESET/ALBUM
USB
SOURCE VOLUME
REPEAT
VOL
SHUFFLE
Play from disc 1 2 3 4
Press CD repeatedly to select CD source. If not, press .
MUTE
DISPLAY
PROG TIMER
AUDIO IN
SOUND
CLOCK
SLEEP
Control play
/ / Select a folder. Enrich sound effect with DSC: balanced, clear, powerful, warm, and bright. Adjust display brightness.
CD
CD
AUDIO IN
FM
PRESET/ALBUM
SOURCE VOLUME
REPEAT
VOL
SHUFFLE
AUDIO IN
MUTE
DISPLAY
PROG TIMER
SOUND
CLOCK
SLEEP
REPEAT (repeat) SHUFFLE (shuffle) VOL +/MUTE (mute) SOUND (sound) DISPLAY (display)
Play from USB
Note •• Make sure that the USB device contains playable audio
content.
1 2
Press USB repeatedly to select the USB source. If not, press .
Skip to a track
For CD: Press / to select another track. For MP3 disc and USB:
1 2
Press Press
/ /
to select an album or a folder. to select a track or a file.
EN
9
Program tracks
You can program a maximum of 20 tracks.
1 2
Press PROG to activate the program mode. / to select an
3 4 5
Press / to select a track, and then press PROG to confirm. [. . . ] Clock/timer setting erased •• Power has been interrupted or the power cord has been disconnected. •• Reset the clock/timer.
EN
15
9 Notice
Any changes or modifications made to this device that are not expressly approved by Philips Consumer Lifestyle may void the user’s authority to operate the equipment.
This product complies with the radio interference requirements of the European Community.
because correct disposal helps to prevent negative consequences for the environmental and human health. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet. ) Your system consists of materials which can be recycled and reused if disassembled by a specialized company. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE PHILIPS MCM2150
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual PHILIPS MCM2150 will begin.