User manual PHILIPS EP1200/00

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual PHILIPS EP1200/00. We hope that this PHILIPS EP1200/00 user guide will be useful to you.


PHILIPS EP1200/00 : Download the complete user guide (4163 Ko)

Manual abstract: user guide PHILIPS EP1200/00

Detailed instructions for use are in the User's Guide.

[. . . ] Removing and inserting the brew group ____________________________________________________________ A1 Control panel A2 Cup holder A3 Pre-ground coffee compartment A4 Lid of bean hopper A5 Adjustable coffee spout A10 Service door A11 Data label with type number A12 Water tank A13 Coffee grounds container A14 Front panel of coffee grounds Refer to figure B for an overview of all buttons and icons. * Drink icons: espresso (1 cup), coffee (1 cup), espresso (2 cups), coffee (2 cups) Congratulations on your purchase of a Philips fully automatic coffee machine!To fully benefit from the support that Philips offers, please register your product at www. Read the separate safety booklet carefully before you use the machine for the first time and save it for future reference. [. . . ] In that case you can still replace the filter but you first need to descale the machine. When the orange AquaClean light flashes: 1 Take out the old AquaClean water filter. 2 Install a new filter and activate it as described in chapter 'Activating the AquaClean water filter (5 Replace the AquaClean water filter at least every 3 months, even if the machine does not yet indicate that replacement is required. deactivating the AquaClean reminder If you do not want to use Philips AquaClean water filters anymore, you can always deactivate the AquaClean reminders: 1 Press the on/off button to switch off the machine. 2 When the machine is switched off, press and hold the AquaClean icon until the light in this icon goes on. Note: The activation of a new AquaClean filter will automatically re-activate the AquaClean reminders. setting the water hardness We advise you to adjust the water hardness to the water hardness in your region for optimal performance and a longer lifetime of the machine. Use the water hardness test strip supplied in the box to determine the water hardness in your region: 1 Immerse the water hardness test strip in tap water or hold it under the tap for 1 second (Fig. The number of squares on the test strip that turn red indicate the water hardness Set the machine to the correct water hardness: 1 Press the on/off button to switch off the machine. 2 When the machine is switched off, tap and hold the aroma strength icon until all lights in the icon 3 Tap the aroma strength icon 1, 2, 3 or 4 times. The number of lights that are on should be the same As the number of red squares on the test strip (Fig. When there are no red squares on the test strip (so all squares are green) please select 1 light. 4 When you have set the correct water hardness, press the start/stop button. Since you only set the water hardness once, the aroma strength function is used to select the water hardness. This does not affect the aroma strength of the drinks you make afterwards. Under no circumstances should you use a descaler based on sulfuric acid, hydrochloric acid, sulfamic or acetic acid (vinegar) as this may damage the water circuit in your machine and not dissolve the limescale properly. When the Calc / Clean light starts to flash slowly, you need to descale the machine. 1 Remove the drip tray and the coffee grounds container, empty them and put them back into place. 3 Pour the whole bottle of Philips descaler in the water tank and then fill it with water up to the Calc Then place it back into the machine. During the descaling cycle the Calc / Clean light flashes to show that the descaling phase is in progress. 7 Let the machine dispense the descaling solution until the display reminds you that the water tank is empty. 8 Empty the water tank, rinse it and then refill it with fresh water up to the Calc / Clean indication. [. . . ] Remove the AquaClean water filter from the water tank and properly prepare it for use before you place it back. See chapter 'AquaClean water filter' for step-by-step instructions. The water tank is not fully inserted and air is drawn into the machine. Make sure the water tank is in the correct position: remove it and insert it again pushing it as far as possible. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE PHILIPS EP1200/00




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual PHILIPS EP1200/00 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.