User manual PACKARD BELL EHR2080 F

[. . . ] No part of this manual may be reproduced or transmitted, in any form or by any means, whether electronic, chemical, manual or otherwise, including but not limited to photocopying, recording, or information storage and retrieval systems, for any purpose without prior written permission of Packard Bell B. Specifically disclaims all warranties, either express or implied, including, but not limited to, implied warranties of merchantability and fitness for a particular purpose with respect to this product and documentation. Therefore some of the instructions, specifications and pictures in this documentation may differ slightly from your particular situation. All items described in this guide are for illustration purposes only and may not apply to your particular situation. [. . . ] Press the AUDIO button repeatedly to toggle between up to 8 audio languages or sound when the disc is recorded with multi-languages. For Karaoke discs, press the AUDIO button to switch between the accompanying music and vocal. If you are using the default value of SETUP->TimeShift->TimeShift buffer mode->Refresh, and change Channels, the Time Shifting buffer data will be lost. However, if you set SETUP->TimeShift->TimeShift buffer mode->Preserve, and change channels, the Time Shifting buffer data will be maintained. As you cannot watch one program in Time Shifting and record another channel, the recorder will prompt you to confirm if you want to keep the current If there is no response, the recorder assumes Timer recording should be started. If you need to keep the video contained in this buffer for future usage, you can save all or part of the buffer. During the saving operation, by pressing the REC/OTR button, you will increase the length of the program you are saving by 30 minutes. Note: You cannot change the channel or the source if a recording is active (if the end of the recording segment has not been entered, or in the case of long recording, it has not been reached). If you attempt to change the channel or source, the Easy HDD Recorder will prompt you to stop recording. The segment will be saved on HDD and then the channel or source will be changed. Once the segment has been saved and registered on HDD Title list, then this segment (and any recording before the segment) will be removed from the Time Shifting buffer. Note: If you are using SETUP->TimeShift->Time shift buffer mode->Preserve, you can only save a segment from the a single source or channel - you cannot save a sequence of channels. In this case, saved programs will be removed from the Time Shifting buffer when Stop is pressed. the Easy HDD Recorder will SAVE the Time Shifted programs immediately if the system is powered down. While in Time Shifting mode, you can use the following buttons for other operations: Recording continues Recording continues unless you want to record to DVD Recording continues If no more space is available on the HDD before a recording is stopped, the Easy HDD Recorder will erase the oldest (un-protected) titles on the HDD. If despite this procedure, there is no space on the HDD to record, the recorder will stop recording and display a prompt to erase some titles and make more room on the HDD. If no more space is available on the HDD before a recording is stopped, the recorder will stop recording and display a prompt to erase some titles and make more room on the HDD. You can use the SETUP->TimeShift->Empty hard disk option to erase all contents on the HDD. Press the TIMESHIFT button once to switch to manual recording mode, and press the REC TO button to switch to DVD record source. To set the Recorder to record for 30 minutes only, press the REC/OTR button after recording has started. a message will be displayed on the screen indicating that the Recorder will record for 30 minutes. Each time the REC/OTR button is pressed, an additional 30 minutes will be added to the record time. [. . . ] If it still doesn't work, try to restore the Easy HDD Recorder to its factory settings. Unload batteries, wait for 30 seconds before place them back into the remote control. Time recording does not work DVD±RW disc cannot be edited TV signal has picture or sound interference Distorted picture or black and white picture No digital audio output · The TV channel you want to record is not saved yet, or you have chosen wrong channel number. Please make sure the disc has not been recorded in different video format (e. [. . . ]