User manual ONE FOR ALL URC-7200

[. . . ] URC 7200 / 7201 Cinema 7 User Manual PREV CH The PREV CH (Previous Channel) key operates the same as the Last Channel or Recall key on your original remote. The PREV CH key also controls the following functions in other modes: DVD/LD, RCVR, AUX and CD mode = Random. The CH v/w, VOL v/w, MUTE, PREV CH and Digit (0-9) keys are made of a phosphorescent material that glows-in-the-dark. Expose the keys to bright light to activate the glow-in-the-dark feature. [. . . ] Receiver/Tuner Brand: Locate the brand name of your Receiver/Tuner in the "Setup Codes For Receivers/Tuners" section. The brands are listed in alphabetical order with the most popular codes listed first. You will use one of these codes to program your Cinema 7 to operate your Receiver/Tuner. 2. RCVR MAGIC 5. Aim the Cinema 7 at your Cable Converter or Satellite and press POWER. Your Cable Converter or Satellite should turn off. If your Cable Converter or Satellite does not respond, repeat steps 2-4, trying each code listed for your brand until you find the one that operates your Cable Converter or Satellite. Your Cinema 7 is now programmed to operate your Cable Converter or Satellite. Write your Cable Converter or Satellite code in the boxes to the left for future reference. 1 5. For the first digit of your four-digit code, press 1 and count the number of times the red light (LED) blinks on the Cinema 7. If the light does not blink when you press the number 1, the digit is zero. For the second digit, press 2 and count the number of times the red light (LED) blinks on the Cinema 7. If the light does not blink when you press the number 2, the digit is zero. For the third digit, press 3 and count the number of times the red light (LED) blinks on the Cinema 7. If the light does not blink when you press the number 3, the digit is zero. For the fourth and final digit, press 4 and count the number of times the red light (LED) blinks on the Cinema 7. If the light does not blink when you press the number 4, the digit is zero. Now you have your four-digit code. 4. SEL 2 3 4 Remember, if you want to use your Cinema 7 to operate your TV, press the TV key first. Programming the Cinema 7 to operate your VCR: Locate the brand name of your VCR and then write it in the space below. VCR Brand: Locate the brand name of your VCR in the "Setup Codes For VCRs" section. The brands are listed in alphabetical order with the most popular codes listed first. You will use one of these codes to program your Cinema 7 to operate your VCR. 2. VCR MAGIC VOL VOL MUTE The VOLv (Volume Up), VOLw (Volume Down) and MUTE keys control the volume the same as the Volume Up and Down and Mute keys on your original remote. The CHv (Channel Up) and CHw (Channel Down) keys change channels the same as the Channel Up and Down keys on your original remote. The CHv/w keys also control the following functions in other modes: DVD/LD mode = Skip Forward/ Skip Reverse, RCVR, AUX and CD mode = Preset Up/Preset Down. [. . . ] Make sure you are aiming your Cinema 7 at your home entertainment component and that you are within 15 feet before using your remote. 5. MAGIC Once your sequence is entered, press and hold MAGIC until the Cinema 7's red light blinks twice. Now, using the example above, whenever the programmed MACRO key is pressed, the Receiver would power ON, the TV will power ON and change the input to VIDEO 1 and then the Satellite would power ON. VOLUME LOCK Volume Lock allows the user to designate which component will control the volume in the TV, DVD/LD and CBL/ SAT modes. MAGIC Press and hold MAGIC until the Cinema 7's red light blinks twice, then release MAGIC. 3. TV The Cinema 7 is not performing commands properly? Press and release TV. [. . . ]