User manual ONE FOR ALL URC-3440

[. . . ] For example pressing the TV key allows the remote to control the functions of your Television, after pressing VCR you can operate your Video Recorder and the SAT key operates your Satellite Receiver or Cable Converter. Number Keys The Number keys (0-9, 10, 20 (AV)) provide functions just like your original remote, such as direct access programme selection. If your original remote uses one/two digit input switching (-/-- symbol), this function can be obtained by pressing the -/-- key, which is the same as the 10 key. If your original remote has an 20 key, this function can also be found under the AV key. [. . . ] If on your original remote control these keys are used for Menu navigation, the ONE FOR ALL Fastext keys may operate in the same way. Important note: For a more detailed explanation of Teletext and Fastext, please refer to the manual of your television. Remember, different televisions control Teletext and Fastext features in different ways. Not all of the Teletext functions may be available for your particular model. Before you start, please read these instructions carefully Make sure your device is switched on (not on standby). Press the TV key on the ONE FOR ALL 4 for the device you wish to Set-Up. Now, aim the ONE FOR ALL 4 at your device and press POWER If your device switches off, the ONE FOR ALL 4 is ready to operate your device. Turn your device back on and try all the remote's functions to ensure they are working properly. If the functions do not work properly, repeat steps 1-5 using another code listed under your brand. If your device does not respond, follow steps 1 to 5 with each code listed for your brand. If none of the codes listed for your brand operate your device, or if your brand is not listed at all, try the search method described on page 7. Write your code in the four boxes provided in the battery compartment and on page 8 for easy future reference. important notes: - Most TV's do not switch on pressing the POWER key. Please try pressing a "number" key or the "TV-text off" key to switch your TV back on. If your device does not respond or is not functioning properly with one of the codes, try another code listed under your brand. - If your device's original remote control does not have a POWER key, press PLAY instead of POWER when setting up your device. - Remember to press the correct device key before operating your device. If your original remote operates more than one device, you need to set up each device separately. Devices can be found under the following keys: If your device does not respond to the ONE FOR ALL 4 after you have tried all the codes listed for your brand, try searching for your code. The Search Method allows you to find the code for your device by scanning through all the codes contained in the memory of the ONE FOR ALL 4. [. . . ] Try repeating the Direct Set-Up using another code listed under your brand or start the search method over again to locate the proper code. Enter the programme number exactly as you would on your original remote. As a safety feature on your ONE FOR ALL, you must press the Record key twice. Make sure you are using new batteries and are aiming the one for all at your device. [. . . ]