User manual ONE FOR ALL TREND LINE

[. . . ] MAGIC Key The MAGIC key is used to set up your LITTLE EASY and to access special functions. TV VCR AUX Device Keys The TV, VCR and AUX keys select the home entertainment device to be controlled. For example pressing the TV key allows the remote to control the functions of your Television, after pressing VCR you can operate your Video Cassette Recorder and the AUX key operates a second Television or Video Recorder. s s s s 3 s s s s Number Keys The Number keys (0-9, 10) provide functions just like your original remote, such as direct access programme selection. If your original remote uses one/two digit input switching (-/-- symbol), this function can be obtained by pressing the -/-key, which is the same as the 10 key. Volume, Programme The Volume and Programme keys control the most frequently used functions of your Television. [. . . ] Press and hold MAGIC until the LITTLE EASY’s red light blinks twice. For the first digit of your three-digit code, press 1 and count the red blinks. For the second digit, press 2 and count the red blinks. 990 3 1 2 3 4 5 For the third digit, press 3 and count the red blinks. Now you have your threedigit code. For your Video, follow the same steps above, only press VCR instead of TV. Make sure you write your Television code in the three boxes on page 22. s s s s 11 s s s s Changing the Device Keys If you want, you can change any of the device keys (TV, VCR or AUX) to operate another type of device. The chart below lists how to change the keys and to set up that device: To Change: Press: MAGIC* 992 VCR TV then TV MAGIC* Code MAGIC* 992 TV VCR then VCR MAGIC* Code MAGIC* 992 TV AUX then AUX MAGIC* Code MAGIC* 992 VCR AUX then AUX MAGIC* Code TV to VCR VCR to TV TV AUX to AUX to VCR * Hold down the MAGIC key until the red light blinks twice. (The light will blink once and then twice. ) To reset a device to its original function, press: TV VCR MAGIC* MAGIC* MAGIC* 992 992 992 TV VCR AUX TV VCR AUX AUX * Hold down the MAGIC key until the red light blinks twice. (The light will blink once and then twice. ) s s s s 12 s s s s The Scan Key Your LITTLE EASY comes with a special Scan key which lets you go through every programme available on your Television or Video Recorder. For example, to scan through the programmes on your Television: 1 TV Aim the LITTLE EASY at your Television and press TV, then Scan. You will automatically move through all the programmes available on your Television stopping at each programme for about three seconds. Remember, the LITTLE EASY must remain aimed at your Television the entire time you are using Scan. 2 When you find a programme that you would like to watch, simply press the Scan key again to stop the Scan feature. To use Scan with your Video Recorder, simply press VCR then Scan. To use Scan with the AUX key, press AUX then Scan. Note: Scan may not function with devices that did not have a programme +/- key on the original remote. s s s s 13 s s s s Colour & Brightness Depending on the functions of your original remote control, the LITTLE EASY can operate the colour and brightness settings of your Television. To adjust the colour: Press MAGIC followed by Volume+ (for colour up) or Volume- (for colour down). To adjust the brightness: Press MAGIC followed by Programme+ (for brightness up) or Programme- (for brightness down). Punch-Through You may be able to use some features of your Television and Video Recorder at the same time. If you’re watching a programme on your Video, you can adjust the volume (a TV function) without first pressing the TV key. The chart below lists some of the possibilities: Last Key Pressed: VCR AUX You Can Control: TV volume up and down, mute TV volume up and down, mute s s s s 14 s s s s More on Teletext The LITTLE EASY is designed to operate the basic functions of teletext (text on, text off and mix). Symbol Title TEXT Description Puts the Television in the teletext mode Switches the Television back to regular viewing mode. Now to set the timer, continue with the steps below. 970 Setting the ONE FOR ALL Sleeptimer: It is possible to set the timer for 15, 30, 45 or 60 minutes. The red light will blink once which indicates the timer is set for 15 minutes. To increase the timer, simply press POWER again (this must be done within 5 seconds. ). The light will blink twice indicating the timer is set for 30 minutes (2x 15). You can press POWER a maximum of four times which will set the timer to 60 minutes. (:15) s s s s 17 s s s s (:30) (:45) (:60) Once you have set the timer to the desired time, set your ONE FOR ALL remote down, pointing it at your device. [. . . ] Some countries do not allow the exclusion or limitation of incidental or consequential damages, or limitation on how long an implied warranty lasts, so the above exclusions or limitations may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from country to country. To obtain warranty service during the warranty period, please carefully pack the product and send it prepaid and adequately insured to the address below, together with your purchase receipt or other proof of the date of original purchase. In UK: In Ireland: In Australia: ONE FOR ALL Sherlane Agencies Ltd. /OFA Kenmark Industrial (A) P. O. [. . . ]