User manual ONE FOR ALL SV 1716

[. . . ] The high frequency signal (2. 4GHz) received by this unit are captured by the built-in antenna of the RECEIVER unit and will be transformed into the original audio and video signals. When an infra red signal is Received by the Remote Control Extender, it will transform the IR command to 433. 92 MHz and can be sent through walls and ceilings. Please note that this feature is only accessable for devices that are controlled via IR (infra-red) signals at a frequency of 30 - 60 kHz This feature does not support the 2-way IRDA waveform. [. . . ] Select the mode on the TV for "Line In" (AV, EXT or channel 0). You can take the remote of your VCR to your bedroom to control your TV channels tuned in your VCR. EXAMPLE 3: Also, if you do not have coax cable connection with the TV in the bedroom, the AV Sender gives the possibility to view your Satellite Receiver (source) programs also on the TV (destination) in the bedroom. You probably already tuned in the channels on your Satellite Receiver. If not, you may need the manual of your Satellite Receiver to tune in the TV channels. Once all channels are tuned in, you are able to watch your TV channels through your AV channel (or other output channel). Connect the TRANSMITTER to the Satellite Receiver and the RECEIVER to the TV in the bedroom. Place the IR eye on / in front of the IR receiver of the Satellite Receiver. Select the mode on the TV for "Line In" (AV, EXT or channel 0). You can take the remote of your Satellite Receiver to your bedroom to control your TV channels tuned in your Satellite Receiver. 6 WWW. ONEFORALL. COM Trouble Shooting Problem & Solution If your house has a heavy metal construction or is equipped with a PC network, it can disturb the radio signal. If this doesn't work try to move the TRANSMITTER and RECEIVER to another place in the house. If you experience problems, try placing the units away from electrical appliances. - Make sure that both TRANSMITTER UNIT and RECEIVER UNIT are set to the same channel. - Make sure that the video source (satellite receiver, video recorder, camcorder, DVD player, digital or analogue Set-Top Box or Pay-TV decoder box) is switched on. - Try to find out if the way the cables are placed cause interference. - Make sure that the distance between the TRANSMITTER and RECEIVER unit is less than 100 ft (30 m). - Disable the auto standby mode of the VCR (check the manual of the VCR how to do this). · Using a remote control, you cannot control the video source from your second TV. - Aim the remote control directly at the Remote Control Extender Eye and ensure that there are no obstacles in between. [. . . ] This product will be repaired or if necessary replaced free of charge if it has been proven to be defective within the one (1) year warranty period. The forwarding costs are on the account of the owner; the costs of returning the product are on the account of UNIVERSAL ELECTRONICS / ONE FOR ALL. This warranty does not cover damage or failures caused by products or services not supplied by UNIVERSAL ELECTRONICS / ONE FOR ALL, or which result from not mounting the product according to manual instructions. [. . . ]