User manual ONE FOR ALL SPORT

[. . . ] Volume, Programme The Volume and Programme keys control the two most frequently used functions of your Television and Satellite Receiver. They operate just as those on your original remote. SET SCAN 2 About your ONE FOR ALL Key MUTE Function Mute The Mute key operates the same function it did on your original remote. Number Keys The Number keys (0-9, 10) provide functions just like your original remote, such as direct access programme selection. If your original remote uses one/two digit input switching (-/-- symbol), this function can be obtained by pressing the -/-- key, which is the same as the 10 key. [. . . ] On some Televisions this function is accessed by pressing the TEXT key twice. MIX Note: For a more detailed explanation of teletext, please refer to the manual of your Television. Remember, different Televisions control teletext features in different ways. Not all of the teletext functions may be available for your particular model. 9 Advanced Features Controlling Colour & Brightness Depending on the functions of your original remote control, the ONE FOR ALL can operate the colour and brightness settings of your Television. To adjust the colour: SET Press SET followed by Volume+ (for colour up) or Volume- (for colour down). To adjust the brightness: SET Press SET followed by Programme+ (for brightness up) or Programme- (for brightness down). 10 Advanced Features Sleeptimer Sleeptimer is a feature which comes built into many TVs and Satellites. It allows you to set your device to turn off within a certain amount of time. This feature comes in handy if, for example, you enjoy falling asleep with your television on. If your TV or Satellite came with this feature built in, follow the instructions "Device Sleeptimer" below. If your device did not come with this feature, follow the instructions "ONE FOR ALL Sleeptimer" Device Sleeptimer If your TV or Satellite has a "Sleeptimer" function built in, you can access this function with your ONE FOR ALL remote. To do so: 1 2 3 Make sure your TV (or Satellite) is switched on. TV or SAT Press the device key (TV or SAT). SET Point the ONE FOR ALL at your TV (or Satellite) and press and release SET then press POWER. To increase the timer, simply press SET and POWER until the timer gets to the desired time. To deactivate the Sleeptimer, repeat steps 1-3 above. During step 3, continue pressing Set then Power until the timer indicates zero minutes. Note: Remember, your device must have its own Sleeptimer function in order for the above instructions to operate. If your device does not have its own Sleeptimer, follow the instructions outlined below. 11 Advanced Features The ONE FOR ALL Sleeptimer Your ONE FOR ALL remote comes with an internal Sleeptimer function for those devices (TV or Satellite) which did not come standard with this function. To use the ONE FOR ALL Sleeptimer: Making your ONE FOR ALL ready for Sleeptimer: 1 2 TV or SAT Press the device key (TV or SAT). SET Then, press and hold SET until the red light blinks twice. Now to set the timer, continue with the steps below. Setting the ONE FOR ALL Sleeptimer: It is possible to set the timer for 15, 30, 45 or 60 minutes. To lock in your: TV code VCR code SAT code AUX code Press: TV SET * * * * 982 982 982 982 VCR SET SAT SET AUX SET * Hold down the SET key until the red light blinks twice. To release the lock, simply repeat the same steps. Note: Once you have locked in a code, you will not be able to enter a new code or reassign the device key until the lock is released. 13 Trouble-Shooting Searching for Your Code If your Television, Video Recorder or Satellite Receiver does not respond to the ONE FOR ALL after you have tried all the codes listed for your brand, try the Search Method. Let's say you cannot get your ONE FOR ALL to control your Television: 1 2 3 4 Switch your Television on. TV Press the TV key on your ONE FOR ALL. Press and hold SET until the ONE FOR ALL's red light blinks twice. Now, alternate between TV and POWER, over and over, until your Television turns off. Remember to keep pointing the ONE FOR ALL at your Television when you press the TV and POWER keys. Now your ONE FOR ALL is ready to run your Television. SET TV 5 SET To search for the code for your Video Recorder, Satellite or Cable Box, follow the instructions above, only press the VCR or SAT key during steps 2 and 4. Note: If your Video's original remote control does not have a power key, press PLAY instead of POWER when searching for your code. 14 Trouble-Shooting Code Blink Out Even if you have used the Search Method, it is handy to know your Television, Video, Satellite or Cable code for future reference. To blink out your Television code: 1 2 3 4 5 TV Press TV. SET Press and hold SET until the ONE FOR ALL's red light blinks twice. [. . . ] ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE WARRANTY PERIOD SET FORTH ABOVE. Some countries do not allow the exclusion or limitation of incidental or consequential damages, or limitation on how long an implied warranty lasts, so the above exclusions or limitations may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from country to country. To obtain warranty service during the warranty period, please carefully pack the product and send it prepaid and adequately insured to the address below, together with your purchase receipt or other proof of the date of original purchase. [. . . ]