User manual ONE FOR ALL KAMELEON 6

[. . . ] 3 (Activation by touching screen and remote simultaneously and/or by keypress) · "EL" Screen brightness adjustment . Page (How to set up the KAMELEON 6 to control your devices) 10 · Search Method . 12 (To find out wich code is currently programmed) QUICK CODE REFERENCE . 13 - 15 (How to copy functions from your original working remote onto the KAMELEON 6) EXTRA FEATURES · Mode re-assignment (How to set up two of the same devices on the KAMELEON 6) . [. . . ] The IR Indicator will show "incoming IR" three times and then the display will switch off. Press and hold the key that you want to copy (Example: mono/stereo) on your original remote control. The display switches back on and you will see two blinks to indicate successful learning operation. If you want to copy other functions within the same mode, simply repeat steps 5 and 6 pressing the next key you want to copy by learning. If you want to copy another function in a different mode, simply continue with step 4 followed by steps 5 and 6. To exit the learning mode and return to the user screen, press the ESC key twice. (x2) 5. 6. 7. 8. WWW. ONEFORALL. COM 13 Learning Feature As soon as the display switches off in step 5 you need to press the key (in this example: the "mono/stereo" key) on your original remote within 10 seconds. If no key is pressed while in learning mode, the remote will return to user mode after 30 seconds. If you learn a function on a key, the original KAMELEON 6 function automatically becomes shifted. Press the MAGIC key then the key to access it (this excludes the POWER, Channel and Volume keys). If you learned on a digit key, access the original function by pressing magic twice and then the digit. If you want to learn a function on a key that is not in the main screen, use the SCROLL key to change the screen. Therefore you can place one learned function per mode on the same key. The amount of keys depends on the other programmed functions and on the remote to be learned from. You can replace a learned function by placing another learned function on top. Please make sure not to use the learning procedure when in direct sunlight or under incandescent lights. Make sure you are using new batteries before following the learning instructions above. Upon changing the batteries, your learned functions will be retained. - - - Shifted Learning It is also possible to place a function shifted on a key to maintain the original function. Example: to place the mono/stereo function shifted on the "red" key. mono/stereo) function shifted on the red key, simply follow steps 1-8 on page 13, only press "MAGIC" then the "red" key (instead of "A") during step 5. "mono/stereo" function in this example; simply press "MAGIC" and then the "red" key. If a Shifted Learned function is placed on the POWER, Channel and Volume keys then the "Sleeptimer" and "Colour & Brightness" features will be sacrificed. [. . . ] · How the function was labeled on your original remote control. You can also visit our website (www. oneforall. com) to find an answer to your questions. Once you obtain(ed) your function code(s) from customer service, programming the code is easy: 1. Press and hold the MAGIC key until the rabbit comes out of the hat (the screen will change to the setup screen). [. . . ]