User manual ONE FOR ALL KAMELEON 4

[. . . ] 3 (Activation by movement or keypress) · "EL" Screen brightness adjustment . Page 8 (How to set up the KAMELEON 4 to control your devices) · Direct code set up . 10 (To find out wich code is currently programmed) QUICK CODE REFERENCE . 11 (How to copy functions from your original working remote onto the KAMELEON 4) EXTRA FEATURES Mode re-assignment (How to set up two of the same devices on the KAMELEON 4) . [. . . ] The KAMELEON 4 offers a special Learning feature that allows you to copy almost any function from your original remote control onto the keypad of the KAMELEON 4. Before you start: - Make sure your original remote is working correctly. - Make sure neither your KAMELEON 4, nor your original remote control is pointing at your device. Learning (direct) Example: To copy the "mono/stereo" function from your original TV remote control onto the "16:9"-key of your KAMELEON 4. Place the KAMELEON 4 and your original remote control on a flat surface. Make sure the ends which you normally point at your device are facing each other. Point the original remote to the front left side of the KAMELEON 4 (see picture below). Keep the remotes at a distance of 2 to 5 cm (0. 8 to 2 inches). 2 Press and hold down the MAGIC key (for about 3 seconds) until the rabbit comes out of the hat. Press the device key (Example: TV key) on the KAMELEON 4 remote to select the mode to which you want to copy the learned function. Press the key (Example: "16:9" key) on the KAMELEON 4 remote where you want to place the learned function. The IR Indicator will show "incoming IR" three times and then the display will switch off. Press and hold the key that you want to copy (Example: mono/stereo) on your original remote control. The display switches back on and you will see two blinks to indicate successful learning operation. 3. 4. 5. 6. 7. If you want to copy other functions within the same mode, simply repeat steps 5 and 6 pressing the next key you want to copy by learning. If your want to copy another function in a different mode, simply continue with step 4 followed by steps 5 and 6. To exit the learning mode, press and hold down the MAGIC key (for about 3 seconds) until the bottom part of IR Indicator blinks four times. WWW. ONEFORALL. COM 11 Learning Feature As soon as the display switches off in step 5 you need to press the key (in this example: the "mono/stereo" key) on your original remote within 10 seconds. If no key is pressed while in learning mode, the remote will return to user mode after 30 seconds. If you learn a function on a key, the original KAMELEON 4 function automatically becomes shifted. Press the MAGIC key then the key to access it (this excludes the POWER, Channel and Volume keys). If you learned on a digit key, access the original function by pressing magic twice and then the digit. If you want to learn a function on a key that is not in the main screen, use the SCREEN key to change the screen. Therefore you can place one learned function per mode on the same key. This depends on the other programmed functions and on the remote to be learned from. [. . . ] Hold down MAGIC until the IR Indicator will blink twice and the rabbit will disappear. WWW. ONEFORALL. COM 19 Extra Features Key Magic® (How to program missing functions) Key Magic® is an exclusive ONE FOR ALL feature. The design of the KAMELEON 4 ensures that many functions of your original remote control can be operated even those that do not have their own key on the KAMELEON 4 keypad. Frequently used functions can be assigned to a key of your choice using the Key Magic® feature of your KAMELEON 4. In order to program a certain function with Key Magic® you need to know the corresponding function code. [. . . ]