User manual NAPCO C 100 SAFARI DATASHEET

[. . . ] C100 SAFARI Weatherproof Outdoor Adaptive® 15. 2m Dual Technology Ruggedized Microwave/PIR Detectors with swivel mount, automatically adjust to their environment, minute by minute, for the ultimate false alarm immunity and reliability The C100-SAFARI is a combination of NAPCO's field-proven dual technology C100ST microwave/passive infrared detector within a new ruggedized, sealed outdoor enclosure with flexible dual mounting brackets for optimal fieldof-view aiming, vertically and horizontally. With a wide operating temperature of -20 to +50 degrees C (-4 º to 122º F), weather-shielded enclosure and white-light filtering fresnel lens, the compact unit will reliably provide outdoor motion detection with a range of 15. 2m x 12. 2m (50 x40') @ 25° C. [. . . ] Napco's fresnel lenses are carefully designed to provide the ideal wide angle lens array; additionally, SAFARI models have extra white-light filtering pigmentation for outdoor extremes. · Forgiving, wide, operating temperature of -20 to +50 degrees C (-4 º to 122º F) and temperature compensated circuitry for dependable use even in outdoor extremes. · Patented Adaptive ® technology continuously monitors and dynamically self-adjusts the sensor to its environment. This ensures intruder "catch" sensitivity is optimized minute-by-minute, while "phantom" false alarm sources, such as pets/animals, fans, sunlight, HVAC, are simultaneously counteracted. The on-board A to D conversion microprocessor (Analog-to-Digital) analyzes all incoming microwave and PIR detected signals against its built in library of waveform signatures of known false alarm sources, like heaters, fans, blowing drapes/blinds and animals. The product of decades of sensor engineering and expertise, this inherent signal processing intelligence, enables Adaptive® Detectors provides unsurpassed false alarm discrimination the reliability and accuracy will save both time and money. · 12 automatically selected, dynamic Adaptive® detection modes for optimal "intruder catch" and stability. The detector combines the strengths of both heat- and motion-sensitive detection technologies to dually verify alarm conditions for ideal false alarm discrimination. · Active, automatic self-testing of all key components and circuitsThe unit will internally generate both a PIR signal and a microwave signal, in intervals of 11- 16 hours, which will fully test both channels independently. Any failure or internal trouble will be reported to the system for quick remedy, avoiding any false sense of security or breach thereof. Key components and resilient SMD circuitry are electronically-shielded to 30V/m. This protects the unit's proper performance from nuisance interference due to static discharge, power surges, electric spikes, etc. [. . . ] · Power supply requirements: Filtered 10. 6 to 16VDC nominal with battery backup form the control panel. · Current drain: 28mA (idle/alarm) at 12VDC (nominal) · Detector (only) dimensions: 11. 4 x 6. 4 x 5. 7cm (HxWxD) (4. 5"H x 2. 5"W x 2. 25"D) · Dimensions on mounting bracket(lg), overall: 12. 7 x 8. 6x 14. 6cm (HxWxD) (5H x 3. 4W 5. 75"D) · Shipping weight: . 567 kg (1. 25lb. ) NAPCO SECURITY GROUP In North America 1-800-645-9445 · 631-842-9400 333 Bayview Avenue, Amityville, New York 11701 USA www. napcosecurity. com International 224 Europa Blvd, Gemini Business Park Warrington WA5 7TN England UK 44 (0) 1925242428 standard wide angle lens Publicly traded on NASDAQ NSSC NAPCO Product Availability ­ Email us at hotline@napcosecurity. com A493 [. . . ]