User manual MUSTEK MDC-800

[. . . ] MDC-800 USER'S MANUAL Getting Started Camera Operation Getting Connected Software Applications ViewFun Appendices CONTENTS 2 Copyright Information All rights reserved. No part of this publication may be reproduced, transmitted, stored in a retrieval system, or translated into any language in any form by any means, mechanical, optical, electronic, recording, or otherwise, without the written permission of the Manufacturer. The Manufacturer reserves the right to revise this manual and to make changes to any or all parts at any time, without obligation to notify any person or entity of such revisions and changes. All other brand or product names mentioned in this manual are trademarks or registered trademarks of their respective owners. [. . . ] Press Enter to start/stop video playback (pressing Stop returns the video to the beginning), or delete (Select Up) to remove the video. 1 2 3 4 before 1 2 3 4 blank after To delete a protected image: 1. From the Playback menu, select Protect and press Enter to unlock the image. Continue to delete the image as described earlier. (3) Delete All This feature enables you to simultaneously delete all of the images, excluding the protected images, from the camera's memory. In order to avoid accidental deletion, a pop-up box will display asking you if you want to delete all of the images. (6) Slide Show This feature enables you to display the captured images in succession (from the first image up to the last image, and returning to the first picture when it is finished)-similar to a typical slide show presentation. · Press Enter to start the show. (4) Protecting or Unprotecting Images: (YES/NO) This feature protects images from accidental deletion or unprotects images for deletion. From the Playback Menu, select Protect and press Enter to lock or unlock the image. · Press Menu to stop the show. 19 (7) Digital Zoom: (On/Off) This feature enables you to enlarge an image for viewing up to 4X its original size. · Menu button: Returns you to the playback main menu. Viewing Images On the Camera LCD 1. Power on the camera, and make sure you are in Playback Mode (Mode button Down). Press Menu to view the Playback LCD menu and use four picture mode, delete, protect, and more. · · · Select Up button: Allows you to move horizontally across the picture. Select Down button: Allows you to move vertically through the picture. Enter button: Allows you to change the direction of movement; horizontally (from left to right, or visa versa), OR vertically (from up to down, or visa versa). On the TV The camera has the ability to display previously captured images on a standard NTSC or PAL television system. In order to view images on the TV it is essential to connect the camera to the TV. Please refer to the next section, Getting Connected: Connecting to the TV, for further instructions. On the PC The camera can also display images on the PC through TWAIN compliant image editing software, such as iPhoto Plus 4. To use the camera with the PC, please refer to the Software Applications chapter. Chapter Connecting to the TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Viewing Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Connecting to the VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Recording Real-time Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Connecting to the PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 3 Getting Connected 21 Connecting to the TV 1. Plug one end of the included video cable into the VIDEO IN terminal of your television. Open the cable panel and plug the other end of the cable into the camera's VIDEO terminal. Viewing images with the Down Button The viewing order of the images will count up through the list to the last image then return to the first image and count up through the list again. 1 2 3 4 è Viewing Images In order to view images on the TV after connecting, please refer to the following: 1. Turn on the TV and change the TV to the VIDEO mode (the same settings you would select when using your VCR). Turn on the camera and make sure it is in Playback Mode (mode button Down). Press the Up/Down buttons to scroll through the images until you reach the desired image. [. . . ] size (320*240) Video Capturing Capability Operation Cycle Digital Zoom Viewfinder Flash Stores 320KB (up to 30 seconds) Stores up to 16 pictures Digital camera/USB PC-camera/Video camera 1. 8" color TFD video Compression Inputs/Outputs Power adapter input port (7. 5V, 1. 3A) Full-motion NTSC and PAL video output Interface Presentation Control Capability PC Remote 64cm (25. 2") to infinity Aperture Lens Field of view 55 degrees 4 AAsize 1. 5V alkaline Dimensions 5. 4 x 2. 9 x 2. 0 (inches) Weight 4X for picture previewing 6 filters available for picture/video capturing Auto/On/Off (red-eye reduction) 10 second delay White Balance Exposure Automatic with 5 selectable Exposure Values (EV) 1/10 to 1/10000 second Power Control CONTENTS 44 Glossary The following represents terms used throughout the manual, and are defined here for your convenience. Baud rate: Is the speed at which the computer and camera communicate with each other. It is sometimes necessary to decrease the baud rate because the computer cannot process image information at high speed. Com port: Is the physical port in the back of the computer where you can connect external devices such as digital cameras and modems. [. . . ]