User manual MTD OEM-290-265
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MTD OEM-290-265. We hope that this MTD OEM-290-265 user guide will be useful to you.
Manual abstract: user guide MTD OEM-290-265
Detailed instructions for use are in the User's Guide.
[. . . ] TUFFY® TILLER FRAME WEIGHTS KIT – OEM-290-265 / 290-265-081
INTRODUCTION
The frame weights are an easily installed and recommended attachment. [. . . ] IMPORTANT: Left and right sides of the unit are determined by standing behind the unit, in the operator’s position, and facing in the direction of forward travel.
Figure 3: (A) 1/4" screw and flat washer. Put a 5/16" flat washer onto one of the 5/16-18 x 1-1/2" screws and install the screw into the rear hole of the frame weight (B, Figure 3). Put a 5/16" lock washer and a 5/16" nut onto the rear frame weight screw. Install a 1/4" nut onto the forward frame weight screw and tighten securely (Figure 4).
Figure 1
KIT CONTENTS
Check to make sure that you have all the necessary parts (see list below). Part
GW-55066 1100799 1100811 1186230 1186229 1100242 1107381 1107382
4. Align the holes in the frame weight with the front holes in the transmission pan and the frame rail. [. . . ] BOX 361131, CLEVELAND, OHIO 44136-0019, 1-866-840-6483
Printed in U. S. A. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE MTD OEM-290-265
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MTD OEM-290-265 will begin.