User manual MTD OEM-190-672

[. . . ] Front Bumper For FastAttach Compatible 600 and 800 Series Tractors For Box Frame Compatible 600 and 800 Series Tractors ™ Model OEM-190-672 SECTION 1: CALLING CUSTOMER SUPPORT If you have difficulty assembling this product or have any questions regarding the controls, operation or maintenance of this unit, please call the Customer Support Department. [. . . ] Reference to the FRONT indicates the grille end; to the REAR the drawbar end. Cotter Pin Clevis Pin Mounting Front Bumper to Fast Attached™ Tractor WARNING: Muffler may be hot!• To mount the bumper to the tractor, hook the notched ends (slots) of the bumper onto the shoulder bolts on the sides of the tractor frame. • Shoulder Bolt Slot Figure 1 Align the holes in the bumper with the holes in the tractor frame and insert the clevis pins through the holes from the outside. 769-00041A (1/04) Mounting Front Bumper to 600 Series Box Frame Tractor WARNING: Muffler may be hot!NOTE: The front bracket is exploded from the tractor for clarity in Figure 2. • To mount the bumper to the tractor, slide the bumper over the front brackets, aligning the two holes in the bumper over the two upper holes in the bracket. [. . . ] The lock washers and nuts will not be neccessary. SHIF T-ONTHEGO 14. 5H P/42" Hex Nut Hex Bolt Tractor Bracket Tractor Bracket Lock Washer Lock Washer Hex Nut Hex Bolt Figure 2 Figure 3 [. . . ]