User manual MTD CC25GHT

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MTD CC25GHT. We hope that this MTD CC25GHT user guide will be useful to you.


MTD CC25GHT : Download the complete user guide (2725 Ko)

Manual abstract: user guide MTD CC25GHT

Detailed instructions for use are in the User's Guide.

[. . . ] Operator’s Manual 2-CYCLE STOP GAS HEDGE TRIMMER Model CC25GHT For problems or questions, DO NOT return this product to the store. Contact your Customer Service Agent. For Consumer Assistance Please Call U. S. A. Imported by: CUB CADET LLC P. O. Box 361131 Cleveland, OH44136-0019 CAUTION: Before using this product, read this manual and follow all safety rules and operating instructions. Made in Taiwan U. S. A. 1-877-835-7841 P/N 9096-MD2005 PRINTED IN TAIWAN • • • • • SAFETY ASSEMBLY OPERATION MAINTENANCE PARTS LIST TABLE OF CONTENTS Warranty Statement Rules for Safe Operation Oil and Fuel Information Starting / Stopping Instrustion Trimming Instructions Maintenance and Repair Instructions Page 2 Pages 3-7 Page 8 Pages 9-10 Page 11 Pages 12-15 Troubleshooting Specifications Parts List California/EPA Emission Control Warranty Statement Manufacturer’s Limited Warranty Page 16 Page 17 Page 18 Page 19 Page 20 RULES FOR SAFE OPERATION The purpose of safety symbols is to attract your attention to possible dangers. [. . . ] For normal stopping, release trigger and allow engine to return to idle speed. Then DEPRESS the OFF “STOP ” switch until the engine stops completely. (Figure 10) TRIMMING INSTRUCTIONS ADDITIONAL SAFETY PRECAUTIONS Before operating your unit, review ALL SAFETY PRECAUTIONS in this manual. STOPPING THE ENGINE WARNING / CAUTION • • IF UNFAMILIAR WITH TRIMMING techniques, practice the procedures with ENGINE in “OFF” position. Striking objects can cause serious injury to operator or bystanders and also damage equipment. If an object is accidentally hit, immediately TURN ENGINE OFF and examine equipment. DO NOT operate unit with other people or animals in the immediate vicinity. Allow a minimum of 50 feet (15 meters) between operator and other people and animals when trimming. Always hold the trimmer, as shown in the illustrations, with one hand on the body handle and one hand on the front handle. A wide, sweeping motion, feeding the blade teeth through the twigs is most effective. A slight downward tilt of the blade, in the direction of motion gives the best cutting. To obtain exceptionally level hedges, a piece of string can be stretched along the length of the hedge as a guide. IDLING/CARBURETOR ADJUSTMENT 1. Occassionally, due to atmospheric conditions such as altitude it might be necessary to make slight adjustment to idle speed. Turn 1/8 turn clockwise to increase idle speed and 1/8 turn counterclockwise to decrease idle speed. Fig. 9 Do not use the trimmer for cutting stems greater than 3/4”. Use the trimmer only for cutting normal shrubbery found around houses and buildings. 10 11 STARTING/STOPPING INSTRUCTIONS WARM ENGINE START 1. Grasp throttle handle firmly, depress safety trigger, and squeeze throttle trigger to FULL position. Pull starter rope briskly until engine starts, but no more than 6 times. If engine does not start, place choke lever in RUN “ ” position and pull starter rope 5 more times. Wait 5 minutes and repeat procedure with choke lever in RUN “ ” position and throttle full open. When it is necessary to stop engine immediately, DEPRESS the OFF “STOP ” switch until the engine stops completely (Figure 10). For normal stopping, release trigger and allow engine to return to idle speed. Then DEPRESS the OFF “STOP ” switch until the engine stops completely. [. . . ] To locate your nearest service dealer dial 1-877-835-7841. CUB CADET LLC P. O. Box 361131 Cleveland, OH 44136-0019 20 MANUFACTURER’S LIMITED WARRANTY FOR: The limited warranty set forth below is given by Cub Cadet LLC with respect to new merchandise purc hased and used in the United States, its possessions and territories. Cub Cadet LLC warrants this product against defects in material and workmanship for a period of two (2) years commencing on the date of original purchase and will, at its option, repair or replace, free of charge, any part found to be defective in material or workmanship. This limited warranty shall only apply if this product has been operated and maintained in accordance with the Operator’s Manual furnished with the product, and has not been subject to misuse, abuse, commercial use, neglect, accident, improper maintenance, alteration, vandalism, theft, fire, water or damage because of other peril or natural disaster. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE MTD CC25GHT




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MTD CC25GHT will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.