User manual MICROSOFT NOTEBOOK COOLING BASE PRODUCT GUIDE

[. . . ] 59 Microsoft Product Guide Read this guide for important safety and health information and the terms of the Limited Warranty that apply to the Microsoft® device that you have purchased. Com/hardware or refer to the Microsoft Help and Support section for contact information. This document includes important information about many Microsoft products. Refer to sections that apply to the features of your device: 0608 PartNo. [. . . ] If you have questions about how your own lifestyle, activities, or medical, or physical condition may be related to MSDs, see a qualified health professional. Devices with Laser Pointers All Devices Caution Use of controls or adjustments, or performance of procedures other than those specified herein may result in hazardous radiation exposure. — Do not use the device outside of its specified operating temperature range +41ºF (+5ºC) to +95ºF (+35ºC). If the device is exposed to an environment outside of its prescribed operation, turn off the device and allow the temperature to stabilize within the specified operating range before using the device. Do Not Attempt Repairs Do not attempt to take apart, open, service, or modify the hardware device or power supply. Any evidence of any attempt to open and/or modify the device, including any peeling, puncturing, or removal of any of the labels, will void the Limited Warranty. Choking Hazard This device may contain small parts which may be a choking hazard to children under . Indb 5 6/3/08 1:50:23 PM Usage and Cleaning Use in accordance with these instructions: ● Do not use near any heat sources. Keeping Cables Out of the Way of People and Pets Arrange all cables and cords so that people and pets are not likely to trip over or accidentally pull on them as they move around or walk through the area. When the product is not in use, you may need to disconnect all cables and cords from the front and rear of the product to keep them out of the reach of children and pets. Laser and LED Specifications Caution Use of controls or adjustments, or performance of procedures other than those specified herein may result in hazardous radiation exposure. Laser Devices This device complies with International Standard IEC60825-1:1993+A1+A2 (IEC 60825-1:2001-08) for a Class 1 and Class 2 laser product. Class 1 Laser Devices CLASS 1 Beam description: Collimated (parallel) beam of infrared light (invisible to LASER PRODUCT the user) IEC 6082-:200-08 Laser power output: < 76 microwatts (at 82 nanometers) to 8 microwatts (at 86 nanometers) Emitted laser wavelength: nominal: 80 nanometers, range: (82 – 86 nanometers) A Class  laser product is safe under reasonably foreseeable conditions of operation as described by IEC 6082- and 2 CFR 00. However, it is recommended that you not direct the laser beam (which is emitted from the bottom of the device) at anyone’s eyes. Class 2 Laser Devices Beam description: Collimated (parallel) beam of light Laser power output: <  milliwatt Emitted laser wavelength: 60 – 670 nanometers This optical device has no serviceable parts. This product uses LEDs that are considered Class 1 (IEC60825-1:1993+A1+A2). However, it is recommended that you not direct the light (which is emitted from the bottom of the device) at anyone’s eyes. Not intended for use in machinery, medical, or industrial applications. Any changes or modifications not expressly approved by Microsoft could void the user’s authority to operate this device. This device is rated as a commercial product for operation at +41ºF (+5ºC) to +95ºF (+35ºC). [. . . ] Some jurisdictions do not allow limitations on how long an implied warranty or condition lasts, so the foregoing limitation may not apply to You. Indb 11 6/3/08 1:50:25 PM Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusions many not apply to You. This Limited Warranty does not include any warranty regarding legal rights or abilities, such as any warranty regarding title, quiet enjoyment or lack of infringement. You need not register Your acquisition of the SOFTWARE and Hardware Device for the Limited Warranty to be effective. [. . . ]