User manual MAMAS & PAPAS MR TURTLE

[. . . ] Do not discard any packaging until you are certain you have all the correct components and fittings. If any items are damaged or missing, please contact your retailer or Mamas & Papas on +44 (0) 845 268 2000. [. . . ] Allow plenty of time and space when beginning the construction of your product. Components 2 1 3 1 Item Name 1 2 3 Head/Foot end Cot sides Base Part no. 00000---0000 00000---0000 00000---0000 Qty 2 2 1 Item Name 4 Bed Side 4 Part no. 00000---0000 Qty 1 FIttInGs a 57mm bolts x8 b Dowels x4 c 63mm bolts x4 d Side rail inserts x4 e Base brackets x4 f 18mm insert nuts x4 g Ball-ended allen key x1 Important: The use of powered screwdrivers is not recommended for assembling this product. -2- 2 Attach the cot sides (2) to one of the head/ foot ends (1) using two dowels (B), four 57mm bolts (A) and the appropriate allen key (g). step 1 A G 1 Secure the other head/ foot end (1) to the cot sides (2) using two dowels (B), four 57mm bolts (A) and the appropriate allen key (G). step 2 2 A G -3- step 3 Secure the head/foot ends (1) to the cot sides (2) using four 63mm bolts (C), four side rail inserts (D) and the appropriate allen key (G). To tighten the 63mm bolts you will need to use the ball shaped end of the allen key at an angle as shown. NOTE: Please ensure that the cross pattern of the side rail insert (D) is visible before attempting to secure the head/foot ends(1). C d G step 4 Insert the smooth ends of the bed base brackets (E) into the holes on the cot sides (2). You should use this position as soon as your baby is old enough to sit up. e -4- 3 step 5 Lower the bed base (3) into the cot frame ensuring that the bed base brackets (E) align with the holes in each corner of the bed base. · Do not use replacement parts that are not recommended or supplied by Mamas & Papas. · Do not place your cot/bed in the close proximity of an open fire and other sources of heat, such as radiators, electric or gas fires. · For reasons of safety we only recommend the use of the Mamas & Papas size 400 mattress for this cot/bed. · The mattress should be no more than 40mm shorter or narrower than the internal length or width of the cot/bed. · The thickness of the mattress chosen should be such that the internal height (the distance between the surface of the mattress to the upper edge of the cot side) is a minimum of 500mm when the base is set in the lowest position and a minimum of 200mm when the cot base is set in the highest position. upper surface) of any mattress fitted must not exceed the line engraved on the inside of the cot/bed leg/side. We recommend the use of the Mamas & Papas size: 400 mattress. Due to constant updating and improvements, some components may occasionally differ slightly from the diagrams shown in these instructions. [. . . ] upper surface) of any mattress fitted must not exceed the line engraved on the inside of the cot/bed leg/side. We recommend the use of the Mamas & Papas size: 400 mattress. Due to constant updating and improvements, some components may occasionally differ slightly from the diagrams shown in these instructions. [. . . ]