User manual MAGELLAN ROADMATE 3055MU

[. . . ] Magellan® RoadMate® 3055 GPS Receiver User Manual 471 El Camino Real, Santa Clara, CA 95050 IMPORTANT SAFETY WARNINGS The Magellan RoadMate receiver is a vehicle-navigation aid designed to assist you in arriving at your selected destinations. When using the Magellan RoadMate receiver, these safety rules must be followed to prevent accidents that can result in injury or death to yourself or others: · Please check the applicable regulations in your state regarding windshield mounting. The driver should enter data or program the Magellan RoadMate receiver only when the vehicle is stationary. Only a vehicle passenger should enter data or program the Magellan RoadMate receiver while the vehicle is moving. [. . . ] As you zoom out in 3D, the display will switch to 2D at higher zoom levels. Tap the '+' or '-' zoom level buttons at the bottom of the display to set the desired zoom level. While viewing the Map screen, slide your finger or a stylus across the map. When finished, tap and the map returns to your current position. Routing to a Panned Position 1. A red push pin will be displayed along with information about the point chosen at the top of the screen. If an active route already exists, first you need to define what to do with this new route point: ·Replace Destination: the next destination is cleared and replaced with the one selected from the Pan screen. ·Go There Now: the selected location is inserted in the route as an intermediate destination before the next destination. ·Add To Trip: the selected destination is added to the end of the current trip. Tap the large GO button on the right to return to the Map screen and begin navigating. Note: if the panned position does not match an existing street address (i. e. the destination is not along a road or street that is stored in the map database), the guidance will stop on the road that is closest to your destination. A dashed line to your final destination will then be displayed on the map. 11 Current Location Screen The Current Location screen displays the approximate address of your current position, the next and previous intersections, your latitude, longitude, heading and elevation. Accessing the Current Location Screen There are two ways to open the Current Location screen. From the Map screen tap on the current position icon Saving Your Current Location to Your Address Book 1. (optional) If you want to save this location to the OneTouch menu, select Add to OneTouch. Edit information: ·Tap the Name field and use the keypad to enter a name for the Address Book entry. (See above for details. ) ·(optional) Tap <Enter Phone Number> to specify a phone number for the address book entry. When the details for this address are acceptable, tap saving the Address Book entry. ) . If you have selected to save this point to the OneTouch menu, you need to select a button for the entry. Maneuver List (Itinerary) This screen is accessed from the Map screen and is available only when routing. Each line in the Maneuver List provides details about the maneuvers in the order that they are to be made, with the next maneuver at the top. The Maneuver List can be modified if you want to exclude one of the maneuvers should you want to avoid travelling on one of the streets listed. Instructions to exclude one of the maneuvers is described in this chapter. When actively following a route, tap the maneuver icon in the top left corner of the Map screen. [. . . ] Setting Auto Zoom on Turns You can set the map to automatically zoom in to the lowest level when coming up to a turn. Setting Highway Lane Assist When Highway Lane Assist is checked, the map will display highway signs as you approach a highway interchange giving you visual indication of which lane you want to be in. Checking Highway Lane Assist enables this function. 34 Sound Setting Volume from Settings 1. Unchecking Button Sounds will turn off the audible indication that a button is tapped. Navigation Preferences Setting The Default Route Method 1. [. . . ]